- Investigation on the axial behavior of cold-formed thick-walled steel columns. In: Journal of Constructional Steel Research, v. 214 (March 2024). (2024):
- Behavior evaluation of concrete made with waste rubber and waste glass after elevated temperatures. In: Journal of Building Engineering, v. 78 (November 2023). (2023):
- Repair of damp-proof layers of historic masonry buildings in Shanghai, China. In: Proceedings of the Institution of Civil Engineers - Civil Engineering, v. 176, n. 3 (August 2023). (2023):
- An integrated method of automated layout design and optimization for modular construction. In: Engineering, Construction and Architectural Management, v. 31, n. 3 (December 2022). (2022):
- Performance evaluation of fiber-reinforced reactive powder concrete exposed to high temperature combining nondestructive test. In: Journal of Building Engineering, v. 61 (December 2022). (2022):
- Development of transportation loading spectra for building modules based on a vehicle-module interaction model. In: Engineering Structures, v. 270 (November 2022). (2022):
- Research on load-bearing performance of new fabricated steel structure beam-column joints with energydissipating elements. In: Structures, v. 38 (April 2022). (2022):
- Influencing factors analysis on shear capacity of cold-formed steel light frame shear walls. In: Structures, v. 33 (October 2021). (2021):
- (2020): Experimental Investigation on Web Crippling Property of High-Strength Cold-Formed (HSCF) Rectangular Steel Tube. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Mechanical Properties of Steels for Cold-Formed Steel Structures at Elevated Temperatures. In: Advances in Civil Engineering, v. 2020 (January 2020).
- Ultimate load-carrying capacity of cold-formed thin-walled columns with built-up box and I section under axial compression. In: Thin-Walled Structures, v. 79 (June 2014). (2014):
- Study on added mass of a circular curved membrane vibrating in still air. In: Thin-Walled Structures, v. 127 (June 2018). (2018):
- Numerical analysis of added mass for open flat membrane vibrating in still air using the boundary element method. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 131 (August 2014). (2014):
- Effect of Added Mass on Wind-Induced Vibration of a Circular Flat Membrane by Wind Tunnel Tests. In: International Journal of Structural Stability and Dynamics, v. 18, n. 12 (November 2018). (2018):
- Assessment of Structural Safety Using SBRA Method. Presented at: IABSE Symposium: Responding to Tomorrow's Challenges in Structural Engineering, Budapest, Hungary, 13-15 September 2006. (2006):
- Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads. In: Journal of Structural Engineering (ASCE), v. 143, n. 3 (March 2017). (2017):
- Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing. In: Journal of Structural Engineering (ASCE), v. 143, n. 11 (November 2017). (2017):
- (2018): Characteristics of Wind Load on Spatial Structures with Typical Shapes due to Aerodynamic Geometrical Parameters and Terrain Type. In: Advances in Civil Engineering, v. 2018 ( 2018).
- Experimental Investigation and Design Method Research on Low-Rise Cold-Formed Thin-Walled Steel Framing Buildings. In: Journal of Structural Engineering (ASCE), v. 139, n. 5 (May 2013). (2013):
- (2018): Uplift Test and Design Method for Bearing Capacity of Isolated Spread Concrete Foundation Slab with Large Width-to-Height Ratio. In: Advances in Civil Engineering, v. 2018 ( 2018).