Yang Li 
- (2024): Uniaxial compressive stress-strain behavior of steel fiber reinforced geopolymer concrete confined by stirrups: Experimental study and analytical model. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Size effect in the mechanical characteristics of steel fiber reinforced alkali-activated slag/fly ash-based concrete. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Unified analytical and design-oriented models for compressive and tensile membrane actions in RC beam-slab structures under internal column loss. In: Engineering Structures, v. 316 (October 2024).
- (2023): Study on failure mechanism and treatment measures of floor heave of high-speed railway tunnel in the interbedded surrounding rock with high geostress. In: Engineering Failure Analysis, v. 150 (August 2023).
- (2024): Study on the pore structure and capillary water migration characteristics of microbially improved strongly weathered phyllite. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Transformer-based structural seismic response prediction. In: Structures, v. 61 (March 2024).
- (2023): Triaxial compression experiment and damage constitutive model of microbially modified strongly weathered phyllite. In: Construction and Building Materials, v. 393 (August 2023).
- (2024): Sustainable design framework for enhancing shear capacity in beams using recycled steel fiber-reinforced high-strength concrete. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Transient heat transfer simulation, sensitivity analysis, and design optimization of shallow ground heat exchangers with hollow-finned structures for enhanced performance of ground-coupled heat pumps. In: Energy and Buildings, v. 305 (February 2024).
- (2023): Study of the Effect of Surface-Modified Rubber Particles on the Properties of UHPC Containing Polyoxymethylene Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (October 2023).
- (2022): Towards comfortable and cost-effective indoor temperature management in smart homes: A deep reinforcement learning method combined with future information. In: Energy and Buildings, v. 275 (November 2022).
- (2022): Utilization of Horizontally Buried Hollow Pipes for Ground Vibration Mitigation in Public Transport Infrastructure: Innovative Technique. In: International Journal of Geomechanics, v. 22, n. 12 (December 2022).
- (2022): Statistical extrapolation methods and empirical formulae for estimating extreme loads on operating wind turbine towers. In: Engineering Structures, v. 267 (September 2022).
- (2022): Study on the effects of solar reflective coatings on the interfacial damage of the CRTS II slab track. In: Construction and Building Materials, v. 325 (March 2022).
- (2021): Thermal performance of the solar reflective fluorocarbon coating and its effects on the mechanical behavior of the ballastless track. In: Construction and Building Materials, v. 291 (July 2021).
- (2021): Sulfate attack resistance of recycled aggregate concrete with NaOH-solution-treated crumb rubber. In: Construction and Building Materials, v. 287 (June 2021).
- (2013): Stability analysis of the slope around flood discharge tunnel under inner water exosmosis at Yangqu hydropower station. In: Computers and Geotechnics, v. 51 (June 2013).
- (2022): Transition of gap-graded soil fabric – shear wave measurements and dispersion relation. In: Soils and Foundations, v. 62, n. 1 (February 2022).
- (2021): Study on seismic failure mechanism of shallow buried underground frame structures based on dynamic centrifuge tests. In: Soil Dynamics and Earthquake Engineering, v. 150 (November 2021).
- (2021): Structural condition monitoring and identification of laser cladding metallic panels based on an acoustic emission signal feature optimization algorithm. In: Structural Health Monitoring, v. 20, n. 3 (January 2021).
- (2016): Towards energy-Efficient homes: Evaluating the hygrothermal performance of different wall assemblies through long-term field monitoring. In: Energy and Buildings, v. 121 (June 2016).
- (2019): A thermal-dissipation correction method for in-situ soil thermal response test: Experiment and simulation under multi-operation conditions. In: Energy and Buildings, v. 194 (July 2019).
- (2018): Spatiotemporal characterization of 3D fracture behavior of carbon-fiber-reinforced polymer composites. In: Composite Structures, v. 203 (November 2018).
- (2017): Three-dimensional exact electric-elastic analysis of a multilayered two-dimensional decagonal quasicrystal plate subjected to patch loading. In: Composite Structures, v. 171 (July 2017).
- (2013): A Study on Modified Methylnaphthalene Sulfonate Formaldehyde Condensates: Synthesis, Structures and Asphalt Emulsification. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Tristable behaviour of cross-shaped unsymmetric fibre-reinforced laminates with concave–convex boundaries. In: Engineering Structures, v. 225 (December 2020).
- (2020): Transient Pulse Test for Non-Darcy Flow Behaviors and Hydromechanical Coupling Effect of Fractured Limestone. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Study on the interface damage of CRTS Ⅱ slab track under temperature load. In: Structures, v. 26 (August 2020).
- (2019): Three-Dimensional Analysis of Complex Rock Slope Stability Affected by Fault and Weak Layer Based on FESRM. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Use of sandstone powder as a mineral additive for concrete. In: Construction and Building Materials, v. 186 (October 2018).
Structurae cooperates with
