Qi Li 
- (2024): Health risk assessment of residential overheating under the heat waves in Guangzhou. In: Building and Environment, v. 266 (December 2024).
- (2024): Estimation and interpretation of interfacial bond in concrete-filled steel tube by using optimized XGBoost and SHAP. In: Structures, v. 70 (December 2024).
- (2025): Experimental and numerical investigation on normal strength and high strength RC arches subjected to underwater explosions. In: Engineering Structures, v. 322 (January 2025).
- (2024): Estimating omnidirectional urban vertical wind speed with direction-dependent building morphologies. In: Energy and Buildings, v. 303 (January 2024).
- (2024): Improving sulfate and chloride resistance in eco-friendly marine concrete: Alkali-activated slag system with mineral admixtures. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Insight into the Mechanical Performance of the TRECC Repaired Cementitious Composite System after Exposure to Freezing and Thawing Cycle. In: Buildings, v. 13, n. 6 (23 May 2023).
- (2023): High-frequency Resonances of Train-track Coupled System due to Multiple Wheels Interference. In: International Journal of Structural Stability and Dynamics, v. 23, n. 16-18 (November 2023).
- (2023): Experimental study on bonding performance of GFRP bars-recycled aggregate concrete under sulfate attack environment. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Field Measurements of Wind Microclimate at the Vehicle Level on a Bridge Deck under Typical Canyon Terrain. In: Journal of Bridge Engineering (ASCE), v. 28, n. 4 (April 2023).
- (2023): Experimental and numerical investigation on dynamic behavior of RC orifice targets subjected to underwater explosions. In: Engineering Structures, v. 279 (March 2023).
- (2023): Influence of Base Rock Deterioration on Tunnel Bottom Structure Damage under Train Excitation. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2022): Improving thermal insulation properties of lightweight epoxy resin matrix composites with millimeter-sized hollow glass microspheres/epoxy hollow spheres. In: Energy and Buildings, v. 277 (December 2022).
- (2023): Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon Fiber. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2022): A Grasshopper Optimization Algorithm-Based Response Surface Method for Non-Probabilistic Structural Reliability Analysis with an Implicit Performance Function. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2016): Numerical Simulation on Impacts of Longitudinal Ventilation on Tunnel Fire Detection. In: Procedia Engineering, v. 135 ( 2016).
- (2016): Influence of Smoke Damper Configuration on Point Extraction Ventilation System of an Urban Tunnel. In: Procedia Engineering, v. 135 ( 2016).
- (2022): Investigation of multiple-presence factor for traffic loads on road-rail bridges based on a novel extreme value analysis approach. In: Structural Safety, v. 96 (May 2022).
- (2021): Failure Mechanism of Weak Rock Slopes considering Hydrological Conditions. In: KSCE Journal of Civil Engineering, v. 26, n. 2 (December 2021).
- (2021): Investigation on the Maximum Expansion Length of Urban Rail Transit Double-Tower Cable-Stayed Bridges Without Rail Expansion Device. In: International Journal of Structural Stability and Dynamics, v. 21, n. 14 (October 2021).
- (2021): Improved indirect measurement of the dynamic stiffness of a rail fastener and its dependence on load and frequency. In: Construction and Building Materials, v. 304 (October 2021).
- (2021): Investigation on the distribution patterns and predictive model of solar radiation in urban street canyons with panorama images. In: Sustainable Cities and Society, v. 75 (December 2021).
- (2021): Influences of street aspect ratios and realistic solar heating on convective heat transfer and ventilation in full-scale 2D street canyons. In: Building and Environment, v. 204 (October 2021).
- (2021): Information modeling of mine working based on BIM technology. In: Tunnelling and Underground Space Technology, v. 115 (September 2021).
- (2019): Field Investigation of Maximum Dynamic Shear Modulus of Clay Deposit Using Seismic Piezocone. In: International Journal of Civil Engineering, v. 17, n. 6 (March 2019).
- (2018): A fast random method for three-dimensional analysis of train-track-soil dynamic interaction. In: Soil Dynamics and Earthquake Engineering, v. 115 (December 2018).
- (2019): Experimental study of the effectiveness of a water mist segment system in blocking fire-induced smoke and heat in mid-scale tunnel tests. In: Tunnelling and Underground Space Technology, v. 88 (June 2019).
- (2017): Influence of Curvature Radius on Static and Dynamic Characteristics of Curved Cable- stayed bridge. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2016): Investigation of the effectiveness of PC@GO on the reinforcement for cement composites. In: Construction and Building Materials, v. 113 (June 2016).
- (2018): Influence of Sand-Rubber Mixtures Backfill on Mechanical Properties of Bridge Abutment and Foundation Piles. In: Soil Mechanics and Foundation Engineering, v. 55, n. 1 (March 2018).
- (2018): Influence of Reservoir Water Levels on the Protective Performance of Concrete Gravity Dams Subjected to Underwater Explosions. In: Journal of Structural Engineering (ASCE), v. 144, n. 9 (September 2018).
Structurae cooperates with
