Li Li 
- (2023): Composition prediction of pore solution in hardened concrete materials based on machine learning. In: Developments in the Built Environment, v. 16 (December 2023).
- (2024): Assessment of hybrid effect between polyethylene fiber and nano-calcium carbonate for flowability and strength of geopolymer composite. In: Magazine of Concrete Research, v. 76, n. 4 (February 2024).
- (2023): Assessing the urban heat island effect of different local climate zones in Guangzhou, China. In: Building and Environment, v. 244 (October 2023).
- (2023): Bending of Bi-directional inhomogeneous nanoplates using microstructure-dependent higher-order shear deformation theory. In: Engineering Structures, v. 291 (September 2023).
- (2022): Curing comparison and performance investigation of polyurethane concrete with retarders. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Crack fractal analysis of fractured polyethylene fiber reinforced alkali activated mortar under flexural load. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Assessment of fiber factor for the fracture toughness of polyethylene fiber reinforced geopolymer. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Analytical solutions for the design of shotcreted waste rock barricades to retain slurried paste backfill. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Construction Technique of Vertical Shafts Excavation Above Subway Tunnel. In: Geotechnical and Geological Engineering, v. 39, n. 6 (22 June 2021).
- (2012): Characterization of high performance CNT-based TSV for high-frequency RF applications. In: Advances in Materials Research, v. 1, n. 1 (March 2012).
- (2022): Characterization of bending performance of reinforced cementitious composites beams with hybrid fibers after exposure to high temperatures. In: Structural Concrete, v. 23, n. 1 (January 2022).
- (2021): Crosswind Stability of Metro Train on a High-Pier Viaduct under Spatial Gust Environment in Mountain City. In: KSCE Journal of Civil Engineering, v. 25, n. 12 (September 2021).
- (2021): Broadening band gaps of shear horizontal waves of metamaterials via graded hierarchical architectures. In: Composite Structures, v. 271 (September 2021).
- (2021): Constitutive Model of Uniaxial Compressive Behavior for Roller-Compacted Concrete Using Coal Bottom Ash Entirely as Fine Aggregate. In: Buildings, v. 11, n. 5 (21 April 2021).
- (2009): Comparative Study of PCA and ICA Based Traffic Flow Compression. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 1 (June 2009).
- (2008): A Car-following Model Based on Drivers’ Cognition Behavior. In: Journal of Highway and Transportation Research and Development (English Edition), v. 3, n. 2 (December 2008).
- (2021): Debris Flow Risk Assessment Method Based on Combination Weight of Probability Analysis. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Active control for ratios of strains in functionally graded piezoelectric composites. In: Composite Structures, v. 236 (March 2020).
- (2017): Bending, buckling and vibration of axially functionally graded beams based on nonlocal strain gradient theory. In: Composite Structures, v. 165 (April 2017).
- (2015): Correlation of acoustic emission with optically observed damage in a glass/epoxy woven laminate under tensile loading. In: Composite Structures, v. 123 (May 2015).
- (2014): Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites. In: Composite Structures, v. 116 (September 2014).
- (2020): Aerodynamic influences of bogie’s geometric complexity on high-speed trains under crosswind. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 196 (January 2020).
- (2017): Assessing impacts of factors on carbonyl compounds emissions produced from several typical Chinese cooking. In: Building and Environment, v. 125 (November 2017).
- (2019): Characteristics of Alkali-Activated Lithium Slag at Early Reaction Age. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 12 (December 2019).
- (2012): Damage Identification of Euler–Bernoulli Beams Using Static Responses. In: Journal of Engineering Mechanics (ASCE), v. 138, n. 5 (May 2012).
- (2009): A Case Study of the Thermal Environment in the Airport Terminal Building under Natural Ventilation. In: Journal of Asian Architecture and Building Engineering, v. 8, n. 1 (May 2009).
- (2006): Coherency matrix-based proper orthogonal decomposition with application to wind field simulation. In: Earthquake Engineering and Engineering Vibration, v. 5, n. 2 (December 2006).
- (2018): Behaviour and damage assessment of a new hybrid-fibre-reinforced mortar under impact load. In: Magazine of Concrete Research, v. 70, n. 17 (September 2018).
- (2017): adaptive filtering-based solution for the Bayesian modal identification formulation. In: Journal of Civil Structural Health Monitoring, v. 7, n. 1 (February 2017).
- (2016): BIM Application in China Corporate United Pavilion Design. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
Structurae cooperates with
