Jian Li 
- (2024): Deformation-fractional change in resistance model of SMA fiber reinforced mortar beams. In: Construction and Building Materials, v. 453 (November 2024).
- (2025): Ballistic performance of aluminum alloy plates with polyurea coatings for high-speed train structures. In: Composite Structures, v. 351 (January 2025).
- (2024): Analytical and numerical evaluation of the effective properties of macro fiber composite (MFC). In: Smart Materials and Structures, v. 33, n. 8 (18 July 2024).
- : Briefing: Selective laser sintering technology to print walnut shell/phenolic resin new biomass-based porous electrode. In: Green Materials.
- (2024): Adjustable mechanical performances of 4D-printed shape memory lattice structures. In: Composite Structures, v. 334 (April 2024).
- (2024): Changes in the Stability of a Superhigh-Deposit Slope Considering the Influence of Seepage Erosion. In: International Journal of Geomechanics, v. 24, n. 7 (July 2024).
- (2024): Application research on composite support technology of concrete-filled steel tube support in high stress and large deformation soft rock roadway: A case study. In: Structures, v. 60 (February 2024).
- (2023): Axial compressive behavior of corroded double-steel-plate composite shear wall with binding bars. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Characterizing piezoelectric properties of PVDF film under extreme loadings. In: Smart Materials and Structures, v. 33, n. 1 (December 2023).
- (2024): Decoupling Analysis Method for Rain-Induced Failure of Shallow Expansive Soil Slopes Considering Swelling and Strength Softening. In: International Journal of Geomechanics, v. 24, n. 2 (February 2024).
- (2023): Design of smart sandwich structures enhanced by multi-functional shear thickening fluids (M-STFs): anti-vibration and electrical conductivity. In: Composite Structures, v. 324 (November 2023).
- (2023): Dynamic characteristics analysis and the identification signal of the horizontal tail drive shaft system with the ballistic impact damage of a helicopter. In: Structural Health Monitoring, v. 23, n. 2 (July 2023).
- (2023): Analytical Study on Limiting Value of Shape Factor of Vertically Loaded Anchors in Saturated Soft Clay. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Crashworthiness performance and optimization of multi-cell aluminum tubes under axial loading. In: Structures, v. 55 (September 2023).
- (2023): Analysis modeling and experiment of bionic winding soft actuator inspired by plant tendrils. In: Smart Materials and Structures, v. 32, n. 3 (1 February 2023).
- (2022): Double-Diffusive Mixed Convection and Radionuclides Removals from the Tail Gas Treatment Unit in Nuclear Medicine Building: Multiple Sifting Structures and Porous Medium. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2021): Application of a digital image correlation bridge inspection methodology on geometrically complex bifurcated distortion‐induced fatigue cracking. In: Fatigue & Fracture of Engineering Materials & Structures, v. 44, n. 11 (18 March 2021).
- (2022): Anchorage performance of grouted corrugated duct connection under monotonic loading: Experimental and numerical investigation. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Behavior comparison of seven-types of steel–concrete composite stub columns under axial compression. In: Engineering Structures, v. 252 (February 2022).
- (2016): Average Soil Skeleton Stress for Unsaturated Soils and Discussion on Effective Stress. In: International Journal of Geomechanics, v. 16, n. 6 (December 2016).
- (2021): The 1st International Project Competition for Structural Health Monitoring (IPC-SHM, 2020): A summary and benchmark problem. In: Structural Health Monitoring, v. 20, n. 4 (April 2021).
- (2020): Development of a Distortion-Induced Fatigue Crack Characterization Methodology Using Digital Image Correlation. In: Journal of Bridge Engineering (ASCE), v. 25, n. 9 (September 2020).
- (2020): Bayesian Finite Element Model Updating of a Long-Span Suspension Bridge Utilizing Hybrid Monte Carlo Simulation and Kriging Predictor. In: KSCE Journal of Civil Engineering, v. 24, n. 2 (January 2020).
- (2019): Complex Resistivity Dispersion Characteristics of Water-Bearing Coal Based on Double Cole-Cole Model. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2005): DPCM-based vibration sensor data compression and its effect on structural system identification. In: Earthquake Engineering and Engineering Vibration, v. 4, n. 1 (June 2005).
- (2013): The combined effects of copper sulfate and rosin sizing agent treatment on some physical and mechanical properties of poplar wood. In: Construction and Building Materials, v. 40 (March 2013).
- (2013): Corrosion Estimation of a Historic Truss Bridge Using Model Updating. In: Journal of Bridge Engineering (ASCE), v. 18, n. 7 (July 2013).
- (2013): Bayesian Updating of Fragility Functions Using Hybrid Simulation. In: Journal of Structural Engineering (ASCE), v. 139, n. 7 (July 2013).
- (2019): Development of wireless sensor node hardware for large-area capacitive strain monitoring. In: Smart Materials and Structures, v. 28, n. 1 (January 2019).
- (2010): Accurate Stress Analysis on Steel Box Girder of Long Span Suspension Bridges Based on Multi-Scale Submodeling Method. In: Advances in Structural Engineering, v. 13, n. 4 (August 2010).
Structurae cooperates with
