Jian Li 
- (2024): Application research on composite support technology of concrete-filled steel tube support in high stress and large deformation soft rock roadway: A case study. Dans: Structures, v. 60 (février 2024).
- (2023): Axial compressive behavior of corroded double-steel-plate composite shear wall with binding bars. Dans: Journal of Building Engineering, v. 79 (novembre 2023).
- (2023): Characterizing piezoelectric properties of PVDF film under extreme loadings. Dans: Smart Materials and Structures, v. 33, n. 1 (décembre 2023).
- (2024): Decoupling Analysis Method for Rain-Induced Failure of Shallow Expansive Soil Slopes Considering Swelling and Strength Softening. Dans: International Journal of Geomechanics, v. 24, n. 2 (février 2024).
- (2023): Design of smart sandwich structures enhanced by multi-functional shear thickening fluids (M-STFs): anti-vibration and electrical conductivity. Dans: Composite Structures, v. 324 (novembre 2023).
- (2023): Dynamic characteristics analysis and the identification signal of the horizontal tail drive shaft system with the ballistic impact damage of a helicopter. Dans: Structural Health Monitoring, v. 23, n. 2 (juillet 2023).
- (2023): Dynamic Response of a Long-Span Double-Deck Suspension Bridge and Its Vibration Reduction. Dans: Buildings, v. 13, n. 7 (28 juin 2023).
- (2023): Analytical Study on Limiting Value of Shape Factor of Vertically Loaded Anchors in Saturated Soft Clay. Dans: Advances in Civil Engineering, v. 2023 (février 2023).
- (2023): Crashworthiness performance and optimization of multi-cell aluminum tubes under axial loading. Dans: Structures, v. 55 (septembre 2023).
- (2023): Analysis modeling and experiment of bionic winding soft actuator inspired by plant tendrils. Dans: Smart Materials and Structures, v. 32, n. 3 (1 février 2023).
- (2022): Double-Diffusive Mixed Convection and Radionuclides Removals from the Tail Gas Treatment Unit in Nuclear Medicine Building: Multiple Sifting Structures and Porous Medium. Dans: Buildings, v. 12, n. 11 (27 octobre 2022).
- (2021): Application of a digital image correlation bridge inspection methodology on geometrically complex bifurcated distortion‐induced fatigue cracking. Dans: Fatigue & Fracture of Engineering Materials & Structures, v. 44, n. 11 (18 mars 2021).
- (2022): Anchorage performance of grouted corrugated duct connection under monotonic loading: Experimental and numerical investigation. Dans: Construction and Building Materials, v. 329 (avril 2022).
- (2022): Behavior comparison of seven-types of steel–concrete composite stub columns under axial compression. Dans: Engineering Structures, v. 252 (février 2022).
- (2016): Average Soil Skeleton Stress for Unsaturated Soils and Discussion on Effective Stress. Dans: International Journal of Geomechanics, v. 16, n. 6 (décembre 2016).
- (2021): The 1st International Project Competition for Structural Health Monitoring (IPC-SHM, 2020): A summary and benchmark problem. Dans: Structural Health Monitoring, v. 20, n. 4 (avril 2021).
- (2011): Dynamic Test and Analysis of T-type Rigid Bridge Damage due to Excess Vibration. Dans: Journal of Highway and Transportation Research and Development (English Edition), v. 5, n. 2 (septembre 2011).
- (2021): Earthquake input and state estimation for buildings using absolute floor accelerations. Dans: Earthquake Engineering and Structural Dynamics, v. 50, n. 4 (10 avril 2021).
- (2020): Development of a Distortion-Induced Fatigue Crack Characterization Methodology Using Digital Image Correlation. Dans: Journal of Bridge Engineering (ASCE), v. 25, n. 9 (septembre 2020).
- (2020): Bayesian Finite Element Model Updating of a Long-Span Suspension Bridge Utilizing Hybrid Monte Carlo Simulation and Kriging Predictor. Dans: KSCE Journal of Civil Engineering, v. 24, n. 2 (janvier 2020).
- (2019): Complex Resistivity Dispersion Characteristics of Water-Bearing Coal Based on Double Cole-Cole Model. Dans: Advances in Civil Engineering, v. 2019 ( 2019).
- (2005): DPCM-based vibration sensor data compression and its effect on structural system identification. Dans: Earthquake Engineering and Engineering Vibration, v. 4, n. 1 (juin 2005).
- (2019): Effects of temperature and lead core heating on response of seismically isolated bridges under near-fault excitations. Dans: Advances in Structural Engineering, v. 22, n. 14 (juin 2019).
- (2016): Efficient time synchronization for structural health monitoring using wireless smart sensor networks. Dans: Structural Control and Health Monitoring, v. 23, n. 3 (mars 2016).
- (2013): The combined effects of copper sulfate and rosin sizing agent treatment on some physical and mechanical properties of poplar wood. Dans: Construction and Building Materials, v. 40 (mars 2013).
- (2013): Corrosion Estimation of a Historic Truss Bridge Using Model Updating. Dans: Journal of Bridge Engineering (ASCE), v. 18, n. 7 (juillet 2013).
- (2013): Bayesian Updating of Fragility Functions Using Hybrid Simulation. Dans: Journal of Structural Engineering (ASCE), v. 139, n. 7 (juillet 2013).
- (2006): Efficient seismic response data storage and transmission using ARX model-based sensor data compression algorithm. Dans: Earthquake Engineering and Structural Dynamics, v. 35, n. 6 (mai 2006).
- (2019): Development of wireless sensor node hardware for large-area capacitive strain monitoring. Dans: Smart Materials and Structures, v. 28, n. 1 (janvier 2019).
- (2010): Accurate Stress Analysis on Steel Box Girder of Long Span Suspension Bridges Based on Multi-Scale Submodeling Method. Dans: Advances in Structural Engineering, v. 13, n. 4 (août 2010).
Structurae coopère avec
