Chuanxi Li
- (2024): A Practical Approach to Alignment and Error Feedback Control for Long-Span Arch Bridges. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Performance evolution of epoxy adhesive and CFRP-steel epoxy-bonded joints subjected to hygrothermal exposure. In: Construction and Building Materials, v. 429 (May 2024).
- (2024): Influence of elevated temperatures on the bond performance of CFRP-steel lap joints bonded by nanosilica-modified adhesive with mixed curing agents. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Stress biaxiality-based residual stress assessment in welded T-joints using the blind-hole method. In: Journal of Constructional Steel Research, v. 216 (May 2024).
- (2023): Stress Concentration Factor-Based Hot-Spot Stress Prediction Model for the Web-Gap Weld of Main Girder in Steel Truss Bridge. In: KSCE Journal of Civil Engineering, v. 28, n. 1 (1 December 2023).
- (2023): Local compression behavior of UHPFRC: Experiments and bearing capacity calculation model. In: Engineering Structures, v. 292 (October 2023).
- (2023): Fatigue evaluation and structural optimization of rib-to-diaphragm connection in orthotropic steel decks. In: Journal of Constructional Steel Research, v. 208 (September 2023).
- (2023): Tensile Property and Toughening Mechanism of Nanoparticle-Modified Epoxy Adhesive. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (May 2023).
- (2018): Push-out test on shear behavior of joint structure between corrugated steel web and concrete lower slab. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2022): Tensile behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) structure with cold joints. In: Engineering Structures, v. 273 (December 2022).
- (2022): Modified softened membrane model for ultra-high-performance fiber-reinforced concrete solid and hollow beams under pure torsion. In: Engineering Structures, v. 270 (November 2022).
- (2022): Shear Capacity of Ultrahigh-Performance Concrete with Monolithic Interface and Wet-Joint Interface. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (July 2022).
- (2022): Mechanical properties of fibre reinforced seawater sea-sand recycled aggregate concrete under axial compression. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Seismic behaviour of seawater coral aggregate concrete columns reinforced with epoxy-coated bars. In: Structures, v. 36 (February 2022).
- (2021): Flexural and cracking behaviors of reinforced UHPC beams with various reinforcement ratios and fiber contents. In: Engineering Structures, v. 248 (December 2021).
- (2021): Static and fatigue test on lightweight UHPC-OSD composite bridge deck system subjected to hogging moment. In: Engineering Structures, v. 241 (August 2021).
- (2012): Flexure Analysis and Parameter Optimization of Light Type Abutment in Self-plane. In: Journal of Highway and Transportation Research and Development (English Edition), v. 6, n. 2 (June 2012).
- (2020): A novel asynchronous-pouring-construction technology for prestressed concrete box girder bridges with corrugated steel webs. In: Structures, v. 27 (October 2020).
- (2020): Fatigue evaluation of rib-deck welds: Crack-propagation-life predictive model and parametric analysis. In: Journal of Constructional Steel Research, v. 173 (October 2020).
- (2021): Mechanisms and Countermeasures for Cracking in PC Box Girder Bridges Constructed by Movable Scaffolding System. In: Structural Engineering International, v. 31, n. 1 (January 2021).
- (2018): Shear capacity of a novel joint between corrugated steel web and concrete lower slab. In: Construction and Building Materials, v. 163 (February 2018).
- (2012): Reasonable Construction Procedures and Control Methods for a Concrete-Filled Steel Tube Arch Bridge Erected with Low Buckle Towers. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2019): A Simplified Calculation Method of Length Adjustment of Datum Strand for the Main Cable with Small Sag. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2007): Test and Analysis for Ultimate Load-Carrying Capacity of Existing Reinforced Concrete Arch Ribs. In: Journal of Bridge Engineering (ASCE), v. 12, n. 1 (January 2007).
- (2019): A novel method for determining the spatial responses of a cable-stayed bridge with four cable-planes. In: Engineering Structures, v. 180 (February 2019).
Structurae cooperates with
