Larry Lessard 
- (2023): A Finite element model for 3D printed recycled parts from end-of-life wind turbine blades. In: Composite Structures, v. 320 (September 2023).
- (2021): An experimental study on the mechanical behaviour of bonded and hybrid bonded-bolted composite joints using digital image correlation (DIC) technique. In: Composite Structures, v. 276 (November 2021).
- (2021): Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints. In: Composite Structures, v. 261 (April 2021).
- (2018): Evolution of mechanical properties of flexible epoxy adhesives under cyclic loading and its effects on composite hybrid bolted/bonded joint design. In: Composite Structures, v. 189 (April 2018).
- (2017): Interlaminar shear behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups. In: Composite Structures, v. 176 (September 2017).
- (2017): Investigation of bolted/bonded composite joint behaviour using design of experiments. In: Composite Structures, v. 170 (June 2017).
- (2016): Improving load sharing in hybrid bonded/bolted composite joints using an interference-fit bolt. In: Composite Structures, v. 149 (August 2016).
- (2016): A new finite element method for modeling delamination propagation without additional degrees of freedom. In: Composite Structures, v. 147 (July 2016).
- (2016): Guided wave scattering behavior in composite bonded assemblies. In: Composite Structures, v. 136 (February 2016).
- (2015): Nonlinear static analysis of a composite bonded/bolted single-lap joint using the meshfree radial point interpolation method. In: Composite Structures, v. 134 (December 2015).
- (2015): Multiscale finite element analysis of mode I delamination growth in a fabric composite. In: Composite Structures, v. 133 (December 2015).
- (2015): Load sharing in single-lap bonded/bolted composite joints. Part I: Model development and validation. In: Composite Structures, v. 129 (October 2015).
- (2015): Load sharing in single-lap bonded/bolted composite joints. Part II: Global sensitivity analysis. In: Composite Structures, v. 129 (October 2015).
- (2014): Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement. In: Composite Structures, v. 107 (January 2014).
- (2014): A comparative study of metamodeling methods for the design optimization of variable stiffness composites. In: Composite Structures, v. 107 (January 2014).
- (2013): Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by Automated Fiber Placement. In: Composite Structures, v. 97 (March 2013).
- (2013): Multi-objective optimization of a composite rotor blade cross-section. In: Composite Structures, v. 96 (February 2013).
- (2012): Surrogate-based multi-objective optimization of a composite laminate with curvilinear fibers. In: Composite Structures, v. 94, n. 8 (July 2012).
- (2010): Optimum stacking sequence design of composite materials Part II: Variable stiffness design. In: Composite Structures, v. 93, n. 1 (December 2010).
- (2009): Optimum stacking sequence design of composite materials Part I: Constant stiffness design. In: Composite Structures, v. 90, n. 1 (September 2009).
- (2013): Bond Characteristics between Fiber-Reinforced Polymer Composite Laminate and Prestressed Concrete. Presented at: IABSE Conference: Assessment, Upgrading and Refurbishment of Infrastructures, Rotterdam, The Netherlands, 6-8 May 2013.
- (2017): Durability assessment of hybrid FRP composite shell and its application to prestressed concrete girders. In: Construction and Building Materials, v. 150 (September 2017).
Structurae cooperates with
