Benjamin Kromoser 
- (2024): Holistic life cycle cost analysis of road bridges with non-metallic reinforcement. In: Developments in the Built Environment, v. 20 (December 2024).
- (2024): Flexural behaviour of reinforced concrete beams with voids: Topology optimisation basis. In: Structures, v. 67 (September 2024).
- (2024): Advances in formwork automation, structure and materials in concrete construction. In: Automation in Construction, v. 162 (June 2024).
- (2024): Comparison of pull-out capacities of robotically and manually drilled and set fasteners. In: Automation in Construction, v. 161 (May 2024).
- (2023): Article of RILEM TC 292-MCC: life cycle assessment (LCA) of non-metallic reinforcement for reinforcing concrete: manufacturing, durability, dismantling, recycling and reuse: a review. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2023): Bridging the gap between mathematical optimization and structural engineering: Design, experiments and numerical simulation of optimized concrete girders. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2023): A contribution to resource-efficient construction: Design flow and experimental investigation of structurally optimised concrete girders. In: Engineering Structures, v. 281 (April 2023).
- (2023): Influence of different parameters on drilling forces in automated drilling of concrete with industrial robots. In: Automation in Construction, v. 150 (June 2023).
- (2022): Experimental investigations on the load-bearing behaviour of traditional and newly developed step joints for timber structures. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): The influence of inaccuracies in the production process on the load-bearing behaviour of timber step joints. In: Construction and Building Materials, v. 330 (May 2022).
- (2022): Investigation of industrial robots vs joinery machines for milling pockets in glulam: Comparison based on surface quality and 3D scans. In: civil engineering design, v. 4, n. 1-3 (June 2022).
- (2021): An innovative resource‐efficient timber‐concrete‐composite ceiling system: Feasibility and environmental performance. In: civil engineering design, v. 3, n. 5-6 (December 2021).
- (2021): Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): The influence of pretensioning on the load-bearing behaviour of concrete beams reinforced with carbon fibre reinforced polymers. In: Composite Structures, v. 273 (October 2021).
- (2021): Experimental investigation and analytical modelling of shear strength of thin walled textile-reinforced UHPC beams. In: Engineering Structures, v. 231 (March 2021).
- (2018): Implants for load introduction into thin-walled CFRP-reinforced UHPC beams. In: Composite Structures, v. 194 (June 2018).
- (2020): Efficient construction of concrete shells by Pneumatic Forming of Hardened Concrete: Construction of a concrete shell bridge in Austria by inflation. In: Structural Concrete, v. 21, n. 1 (February 2020).
- (2019): Building lightweight structures with carbon‐fiber‐reinforced polymer‐reinforced ultra‐high‐performance concrete: Research approach, construction materials, and conceptual design of three building components. In: Structural Concrete, v. 20, n. 2 (April 2019).
- (2019): Erfahrungsbericht aus Österreich über die Anwendung von neuen Bauverfahren im Brückenbau. Presented at: 29. Dresdener Brückenbausysmposium, 11./12. März 2019, Dresden (Germany).
- (2017): Development of prestressed T-beams made of textile reinforced UHPC. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2018): Einflussparameter auf die Spaltrissbildung in Textilbeton. In: Beton- und Stahlbetonbau, v. 113, n. 12 (December 2018).
- (2019): Flexural behaviour of filigree slab elements made of carbon reinforced UHPC. In: Construction and Building Materials, v. 199 (February 2019).
- (2018): Form Finding of Shell Bridges Using the Pneumatic Forming of Hardened Concrete Construction Principle. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Ein innovatives Betonschalenbauverfahren in Anwendung: Herstellung der Wildbrücke AM2 mit PFHC. In: Beton- und Stahlbetonbau, v. 113, n. 3 (March 2018).
- (2016): Flexible formwork technologies - a state of the art review. In: Structural Concrete, v. 17, n. 6 (December 2016).
- (2017): Aktives Verformen von ausgehärteten Betonelementen zur Herstellung von räumlich gekrümmten Betonflächen. In: Beton- und Stahlbetonbau, v. 112, n. 2 (February 2017).
- (2018): Entwurf, Geometrieoptimierung und Bemessung der Wildbrücke AM2 hergestellt mit PFHC. In: Beton- und Stahlbetonbau, v. 113, n. 2 (February 2018).
- (2017): How to inflate a hardened concrete shell with a weight of 80 t. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
- (2015): Egg-Graben-Brücke, Wildbrücke AM2, Lafnitzbrücke – Anwendung von neuen Bauverfahren für Brücken in Österreich. Presented at: 25. Dresdener Brückenbausysmposium, 9./10. März 2015, Dresden (Germany).
- (2014): Herstellung von Schalentragwerken aus Beton mit der "Pneumatic Wedge Method" - Ein neues Bauverfahren für den Bau von zweifach gekrümmten Betonflächen mithilfe von pneumatischer Schalung. In: Beton- und Stahlbetonbau, v. 109, n. 8 (August 2014).
Structurae cooperates with
