Walter Kaufmann 
- : Passive confinement of reinforced concrete members revisited. In: Structural Concrete.
- (2024): Shrinkage cracking in restrained FRC members containing conventional reinforcement. In: Structural Concrete, v. 25, n. 2 (January 2024).
- (2023): Stress field model for bond in reinforced concrete ties. In: Engineering Structures, v. 294 (November 2023).
- (2023): Strain-based analysis of reinforced concrete pull-out tests under monotonic and repeated loading. In: Engineering Structures, v. 289 (August 2023).
- (2023): Rotational springs for localized crack modeling in structural concrete. In: Structural Concrete, v. 24, n. 5 (October 2023).
- (2020): Opportunities and challenges for structural engineering of digitally fabricated concrete. In: Cement and Concrete Research, v. 133 (July 2020).
- (2018): Rethinking reinforcement for digital fabrication with concrete. In: Cement and Concrete Research, v. 112 (October 2018).
- (2023): Modeling and design of concrete hinges under general loading. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2023): Large‐scale experiments on concrete hinges under general loading. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2023): Load‐deformation behavior of locally corroded reinforced concrete retaining wall segments: Experimental results. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2023): Structural behaviour of post-installed reinforcement for 3D concrete printed shells – A case study on water tanks. In: Construction and Building Materials, v. 366 (February 2023).
- (2022): Shear strength of concrete beams using stay-in-place flexible formworks with integrated transverse textile reinforcement. In: Engineering Structures, v. 271 (November 2022).
- (2022): Partially loaded areas in reinforced concrete: Mechanical modelling. In: Engineering Structures, v. 271 (November 2022).
- (2023): Modeling statically indeterminate reinforced concrete slabs and beams under fire conditions. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2022): Partially loaded areas in reinforced concrete: Experimental campaign and model validation. In: Engineering Structures, v. 273 (December 2022).
- (2008): Practitioners’ guide to finite element modelling of reinforced concrete structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 9782883940857.
- (2022): Modelling the load-deformation behaviour of lap splices with the Tension Chord Model. In: Engineering Structures, v. 252 (February 2022).
- (2021): Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2022): Refined extraction of crack characteristics in large-scale concrete experiments based on digital image correlation. In: Engineering Structures, v. 251 (January 2022).
- (2021): Structural behaviour of 3D printed concrete beams with various reinforcement strategies. In: Engineering Structures, v. 240 (August 2021).
- (2021): Simplified time‐dependent crack width prediction for fiber reinforced concrete flexural members. In: Structural Concrete, v. 22, n. 3 (April 2021).
- (2018): Shear Tests on RC Beams without Stirrups under Uniformly Distributed Load. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2020): Simplified prediction of the time dependent deflection of SFRC flexural members. In: Materials and Structures, v. 53, n. 3 (20 April 2020).
- (2020): Strength and Deformation Capacity of Tension and Flexural RC Members Containing Steel Fibers. In: Journal of Structural Engineering (ASCE), v. 146, n. 5 (May 2020).
- (2021): Load Factors for Permanent Actions and Cable Preload in Cable-stayed Bridges. In: Structural Engineering International, v. 31, n. 1 (January 2021).
- (2019): Shear transfer across cracks in steel fibre reinforced concrete. In: Engineering Structures, v. 186 (May 2019).
- (2017): Re-thinking traditional construction processes: Accelerated channel construction. Presented at: IABSE Conference: Creativity and Collaboration – Instilling Imagination and Innovation in Structural Design, Bath, United Kingdom, 19-20 April 2017.
- (1999): Prediction of Reinforcement Tension Produced by Arch Action in RC Beams. In: Journal of Structural Engineering (ASCE), v. 125, n. 8 (August 1999).
- (2018): Stress field solution for strip loaded reinforced concrete blocks. In: Engineering Structures, v. 171 (September 2018).
- (2017): Sind Fachwerkmodelle noch zeitgemäß?. In: Beton- und Stahlbetonbau, v. 112, n. 6 (June 2017).
Structurae cooperates with
