Eduardo Júlio 
- (2024): Bond stress and cracking in low carbon concrete with fly ash addition. In: Engineering Structures, v. 316 (October 2024).
- (2023): Comprehensive design methodology for 3D printing mortars. In: Construction and Building Materials, v. 401 (October 2023).
- (2022): Automatic strength assessment of the virtually modelled concrete interfaces based on shadow-light images. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Guide for Protection and Repair of Concrete Structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 978-2-88394-156-4.
- (2021): Durability of mortar matrices of low-cement concrete with specific additions. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Experimental study on the interface between low cement recycled aggregates concrete and ultra-high durability concrete. In: Construction and Building Materials, v. 304 (October 2021).
- (2021): Flexural behavior of slender long‐span precast prestressed high‐strength concrete girders. In: Structural Concrete, v. 22, n. 4 (June 2021).
- (2021): Enhanced Mechanical and Durability Performances of Low Cement Concrete with Natural Pozzolan Addition. In: Journal of Advanced Concrete Technology, v. 19, n. 5 (13 May 2021).
- (2019): Aerial Crack View: Crack monitoring in concrete bridges through image processing acquired by UAV. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2021): Experimental development of low cement content and recycled construction and demolition waste aggregates concrete. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Efficiency of cement content and of compactness on mechanical performance of low cement concrete designed with packing optimization. In: Construction and Building Materials, v. 266 (January 2021).
- (2021): Chromatic design and application of restoration mortars on smooth surfaces of white and GRAY concrete. In: Structural Concrete, v. 22 (January 2021).
- (2020): Bond behaviour between steel / stainless-steel reinforcing bars and low binder concrete (LBC). In: Engineering Structures, v. 221 (October 2020).
- (2020): Admixture tuning for high‐performance concrete for the production of novel precast pre‐stressed long‐span girders for highway overpasses. In: Structural Concrete, v. 21, n. 5 (October 2020).
- (2019): Colored concrete restoration method: For chromatic design and application of restoration mortars on smooth surfaces of colored concrete. In: Structural Concrete, v. 20, n. 4 (August 2019).
- (2019): Automatic mapping of cracking patterns on concrete surfaces with biological stains using hyper-spectral images processing. In: Structural Control and Health Monitoring, v. 26, n. 3 (February 2019).
- (2019): 3D finite element model for hybrid FRP-confined concrete in compression using modified CDPM. In: Engineering Structures, v. 190 (July 2019).
- (2006): Assessing Concrete-to-Concrete Bond Strength by Measuring the Roughness of the Substrate Surface. Presented at: IABSE Symposium: Responding to Tomorrow's Challenges in Structural Engineering, Budapest, Hungary, 13-15 September 2006.
- (2015): Characterization of alkali-activated binders using the maturity method. In: Construction and Building Materials, v. 95 (October 2015).
- (2015): Enhancement of the thermal performance of perforated clay brick walls through the addition of industrial nano-crystalline aluminium sludge. In: Construction and Building Materials, v. 101 (December 2015).
- (2015): Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. In: Construction and Building Materials, v. 127 (November 2016).
- (2014): Automatic concrete health monitoring: assessment and monitoring of concrete surfaces. In: Structure and Infrastructure Engineering, v. 10, n. 12 (October 2014).
- (2018): Behavior of reinforced concrete frame with masonry infill wall subjected to vertical load. In: Engineering Structures, v. 171 (September 2018).
- (2019): Effect of non-structural masonry brick infill walls on the robustness of a RC framed building severely damaged due to a landslide. In: Engineering Structures, v. 180 (February 2019).
- (2011): Automatic integrated system for monitoring superficial cracks. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): Bond Strength of Normal-to-Lightweight Concrete Interfaces. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): Alkali-Activated Lightweight Aggregate Concrete. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): fib Model-Code 2010 Approach for Concrete-to-Concrete Interfaces. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): Assessment of Concrete Surfaces Using Multi-Spectral Image Analysis. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
Structurae cooperates with
