Zhengwu Jiang 
- (2025): Autolytic microsphere capsules using in cement composites: A self-healing enhancement via hydration control and secondary cracking mode alteration. In: Construction and Building Materials, v. 463 (February 2025).
- (2024): Enhancing fiber-reinforced asphalt binders via graphene oxide grafting: A novel interfacial modulation strategy. In: Construction and Building Materials, v. 445 (September 2024).
- (2024): Coupling effect of concrete cracks and stray current on chloride-induced corrosion of rebar. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Effect of flowing water on the ettringite-induced healing of concrete cracks by electrodeposition: Experiments and molecular dynamics simulations. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Effects of simulated groundwater solutions with different Ca2+ to Mg2+ concentration ratios on asymmetric electrodeposition in concrete. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Effect of Internal Curing with Superabsorbent Polymers on the Compressive Strength and Shrinkage of Concrete with Natural Volcanic Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (June 2024).
- (2024): Comparative fracture properties of ambient-cured geopolymer concrete containing four different fibers in mono and hybrid combinations using digital image correlation. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): EIS based assessment of electrodeposition effect of concrete cracks: Experiment and equivalent model. In: Construction and Building Materials, v. 377 (May 2023).
- (2024): Adhesive and rheological properties of fresh mortar with manufactured sand as replacement of river sand. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Comparison of compressive, flexural, and temperature-induced ductility behaviours of steel-PVA hybrid fibre reinforced OPC and geopolymer concretes after high temperatures exposure. In: Construction and Building Materials, v. 399 (October 2023).
- (2005): Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes. In: Cement and Concrete Research, v. 35, n. 8 (August 2005).
- (2022): Effect of fibre addition on the static and dynamic compressive properties of ambient-cured geopolymer concrete. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Bacterially induced CaCO3 precipitation for the enhancement of quality of coal gangue. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Effect of early-hydration behavior on rheological properties of borax-admixed magnesium phosphate cement. In: Construction and Building Materials, v. 283 (May 2021).
- (2022): Effect of CO32 and Ca2+ on self-healing of cementitious materials due to “build-in” carbonation. In: Journal of Building Engineering, v. 56 (September 2022).
- (2018): Chemical and mineralogical alterations of concrete subjected to chemical attacks in complex underground tunnel environments during 20–36 years. In: Cement and Concrete Composites, v. 86 (February 2018).
- (2022): Experimental Application of Cement-Stabilized Pavement Base with Low-Grade Metamorphic Rock Aggregates. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Evaluating the stiffening effect of CSA and sodium carbonate on the printability of OPC mortar. In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Effect of chloride attack on the bonded concrete system repaired by UHPC. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Effect of Chloride Ion Content and Replacement Ratio of Manufactured Sand on Performance of Sea Sand Masonry Mortar. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 1 (October 2020).
- (2021): Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose. In: Construction and Building Materials, v. 267 (January 2021).
- (2021): The effect of Ca2+ concentrations on the characteristics of Mg(OH)2-based building materials prepared in situ by electrodeposition. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material. In: Construction and Building Materials, v. 247 (June 2020).
- (2019): Evaluation of the potential use of form-stable phase change materials to improve the freeze-thaw resistance of concrete. In: Construction and Building Materials, v. 203 (April 2019).
- (2019): Acoustic emission analysis of characteristics of healing products in steam-cured cementitious materials with mineral additives. In: Construction and Building Materials, v. 201 (March 2019).
- (2016): Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method. In: Materials and Structures, v. 49, n. 12 (December 2016).
- (2015): Effect of different grinding aids on property of granulated blast furnace slag powder. In: Materials and Structures, v. 48, n. 12 (December 2015).
Structurae cooperates with
