Zhengwu Jiang
- (2024): Effects of simulated groundwater solutions with different Ca2+ to Mg2+ concentration ratios on asymmetric electrodeposition in concrete. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Effect of Internal Curing with Superabsorbent Polymers on the Compressive Strength and Shrinkage of Concrete with Natural Volcanic Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (Juni 2024).
- (2024): Comparative fracture properties of ambient-cured geopolymer concrete containing four different fibers in mono and hybrid combinations using digital image correlation. In: Journal of Building Engineering, v. 89 (Juli 2024).
- (2023): EIS based assessment of electrodeposition effect of concrete cracks: Experiment and equivalent model. In: Construction and Building Materials, v. 377 (Mai 2023).
- (2024): Adhesive and rheological properties of fresh mortar with manufactured sand as replacement of river sand. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Comparison of compressive, flexural, and temperature-induced ductility behaviours of steel-PVA hybrid fibre reinforced OPC and geopolymer concretes after high temperatures exposure. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2020): Experimental study on the stability of C-S-H nanostructures with varying bulk CaO/SiO2 ratios under cryogenic attack. In: Cement and Concrete Research, v. 135 (September 2020).
- (2005): Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes. In: Cement and Concrete Research, v. 35, n. 8 (August 2005).
- (2023): Flexural performance and patterns identification of UHPC subjected to alternating elevated and cryogenic attacks with acoustic emission characterization. In: Construction and Building Materials, v. 364 (Januar 2023).
- (2022): Effect of fibre addition on the static and dynamic compressive properties of ambient-cured geopolymer concrete. In: Journal of Building Engineering, v. 58 (Oktober 2022).
- (2022): Bacterially induced CaCO3 precipitation for the enhancement of quality of coal gangue. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2021): Effect of early-hydration behavior on rheological properties of borax-admixed magnesium phosphate cement. In: Construction and Building Materials, v. 283 (Mai 2021).
- (2022): Effect of CO32 and Ca2+ on self-healing of cementitious materials due to “build-in” carbonation. In: Journal of Building Engineering, v. 56 (September 2022).
- (2018): Chemical and mineralogical alterations of concrete subjected to chemical attacks in complex underground tunnel environments during 20–36 years. In: Cement and Concrete Composites, v. 86 (Februar 2018).
- (2022): Experimental Application of Cement-Stabilized Pavement Base with Low-Grade Metamorphic Rock Aggregates. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Evaluating the stiffening effect of CSA and sodium carbonate on the printability of OPC mortar. In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods. In: Construction and Building Materials, v. 273 (März 2021).
- (2021): Effect of chloride attack on the bonded concrete system repaired by UHPC. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): Effect of Chloride Ion Content and Replacement Ratio of Manufactured Sand on Performance of Sea Sand Masonry Mortar. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 1 (Oktober 2020).
- (2021): Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): The effect of Ca2+ concentrations on the characteristics of Mg(OH)2-based building materials prepared in situ by electrodeposition. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2020): Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2020): Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material. In: Construction and Building Materials, v. 247 (Juni 2020).
- (2019): Evaluation of the potential use of form-stable phase change materials to improve the freeze-thaw resistance of concrete. In: Construction and Building Materials, v. 203 (April 2019).
- (2019): Acoustic emission analysis of characteristics of healing products in steam-cured cementitious materials with mineral additives. In: Construction and Building Materials, v. 201 (März 2019).
- (2019): Fresh and hardened properties of self-compacting concrete using silicon carbide waste as a viscosity-modifying agent. In: Construction and Building Materials, v. 200 (März 2019).
- (2017): Experimental investigation on the volume stability of magnesium phosphate cement with different types of mineral admixtures. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2016): Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method. In: Materials and Structures, v. 49, n. 12 (Dezember 2016).
- (2015): Effect of different grinding aids on property of granulated blast furnace slag powder. In: Materials and Structures, v. 48, n. 12 (Dezember 2015).
Structurae kooperiert mit
