Stefan Jacobsen 
- (2023): Reviewing the Potential of Phase Change Materials in Concrete Pavements for Anti-Freezing Capabilities and Urban Heat Island Mitigation. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Anisotropy and macro porosity in wet sprayed concrete: Laminations, fibre orientation and macro pore properties measured by image analysis, PF test, water penetration and CT scanning. In: Construction and Building Materials, v. 389 (July 2023).
- (2023): Bonding property between fiber and cementitious matrix: A critical review. In: Construction and Building Materials, v. 378 (May 2023).
- (2019): Modeling of water transport in highly saturated concrete with wet surface during freeze/thaw. In: Cement and Concrete Research, v. 115 (January 2019).
- (2013): Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste. In: Cement and Concrete Research, v. 54 (December 2013).
- (2009): Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar. In: Cement and Concrete Research, v. 39, n. 8 (August 2009).
- (2009): Flow conditions of fresh mortar and concrete in different pipes. In: Cement and Concrete Research, v. 39, n. 11 (November 2009).
- (2022): Effect of Set Accelerator on Capillary Suction and Porosity of Concrete – Cast Samples with Constant Water/Binder Ratio. In: Nordic Concrete Research, v. 67, n. 2 (December 2022).
- (2022): Empirical Modelling of Lithium Mitigation for Alkali-Silica Reactivity. In: Nordic Concrete Research, v. 67, n. 2 (December 2022).
- (2022): Effect of Set Accelerator on Properties of Wet Sprayed Concrete. In: Nordic Concrete Research, v. 66, n. 1 (July 2022).
- (2022): Nordic Concrete Research workshop: “Accelerated freeze-thaw testing of concrete”, Lyngby, 20th April 2022. In: Nordic Concrete Research, v. 66, n. 1 (July 2022).
- (2021): Application of an Improved Empirical Model for Rheology Prediction of Cement Pastes Modified with Filler from Manufactured Sand. In: Nordic Concrete Research, v. 65, n. 2 (December 2021).
- (2021): Shape and Size of Particles Scaled from Concrete Surfaces during Salt Frost Testing and Rapid Freeze/thaw in Water. In: Nordic Concrete Research, v. 64, n. 1 (June 2021).
- (2020): Review of Sprayability of Wet Sprayed Concrete. In: Nordic Concrete Research, v. 63, n. 2 (December 2020).
- (2019): Effect of AEA-SP Dosage Sequence on Air Entrainment in FA Concrete. In: Nordic Concrete Research, v. 61, n. 2 (December 2019).
- (2018): Filler and Water Reducer Effects on Sedimentation, Bleeding and Zeta-Potential of Cement Paste. In: Nordic Concrete Research, v. 58, n. 1 (June 2018).
- (2022): Modeling of path-dependent phase change in sorption and freezing of pore water for cementitious materials. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Rheology modelling of cement paste with manufactured sand and silica fume: Comparing suspension models with artificial neural network predictions. In: Construction and Building Materials, v. 317 (January 2022).
- (1996): Self healing of high strength concrete after deterioration by freeze/thaw. In: Cement and Concrete Research, v. 26, n. 1 (January 1996).
- (1996): Effect of cracking and healing on chloride transport in OPC concrete. In: Cement and Concrete Research, v. 26, n. 6 (June 1996).
- (2018): Measuring Rheological Properties of Cement Pastes: Most common Techniques, Procedures and Challenges. In: RILEM Technical Letters, v. 2 (April 2018).
- (2019): Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste. In: Construction and Building Materials, v. 218 (September 2019).
- (2014): Aerogel-incorporated concrete: An experimental study. In: Construction and Building Materials, v. 52 (February 2014).
- (2013): Analytical and experimental study on thermal conductivity of hardened cement pastes. In: Materials and Structures, v. 46, n. 9 (September 2013).
- (2011): Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar. In: Materials and Structures, v. 44, n. 8 (October 2011).
- (2016): Freeze–thaw resistance of sprayed concrete in tunnel linings. In: Materials and Structures, v. 49, n. 8 (August 2016).
- (1999): Effect of wind on drying from wet porous building materials surfaces—A simple model in steady state. In: Materials and Structures, v. 32, n. 1 (January 1999).
- (1997): Frost testing of high strength concrete: Frost/salt scaling at different cooling rates. In: Materials and Structures, v. 30, n. 1 (January 1997).
- (2008): Aggregate packing and -void saturation in mortar and concrete proportioning. In: Materials and Structures, v. 41, n. 4 (May 2008).
- (2010): Effect of silica fume, steel fiber and ITZ on the strength and fracture behavior of mortar. In: Materials and Structures, v. 43, n. 1-2 (February 2010).
Structurae cooperates with
