Stefan Jacobsen 
- (2023): Reviewing the Potential of Phase Change Materials in Concrete Pavements for Anti-Freezing Capabilities and Urban Heat Island Mitigation. Dans: Buildings, v. 13, n. 12 (22 novembre 2023).
- (2023): Anisotropy and macro porosity in wet sprayed concrete: Laminations, fibre orientation and macro pore properties measured by image analysis, PF test, water penetration and CT scanning. Dans: Construction and Building Materials, v. 389 (juillet 2023).
- (2023): Bonding property between fiber and cementitious matrix: A critical review. Dans: Construction and Building Materials, v. 378 (mai 2023).
- (2019): Modeling of water transport in highly saturated concrete with wet surface during freeze/thaw. Dans: Cement and Concrete Research, v. 115 (janvier 2019).
- (2013): Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste. Dans: Cement and Concrete Research, v. 54 (décembre 2013).
- (2009): Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar. Dans: Cement and Concrete Research, v. 39, n. 8 (août 2009).
- (2009): Flow conditions of fresh mortar and concrete in different pipes. Dans: Cement and Concrete Research, v. 39, n. 11 (novembre 2009).
- (2022): Effect of Set Accelerator on Capillary Suction and Porosity of Concrete – Cast Samples with Constant Water/Binder Ratio. Dans: Nordic Concrete Research, v. 67, n. 2 (décembre 2022).
- (2022): Empirical Modelling of Lithium Mitigation for Alkali-Silica Reactivity. Dans: Nordic Concrete Research, v. 67, n. 2 (décembre 2022).
- (2022): Effect of Set Accelerator on Properties of Wet Sprayed Concrete. Dans: Nordic Concrete Research, v. 66, n. 1 (juillet 2022).
- (2022): Nordic Concrete Research workshop: “Accelerated freeze-thaw testing of concrete”, Lyngby, 20th April 2022. Dans: Nordic Concrete Research, v. 66, n. 1 (juillet 2022).
- (2021): Application of an Improved Empirical Model for Rheology Prediction of Cement Pastes Modified with Filler from Manufactured Sand. Dans: Nordic Concrete Research, v. 65, n. 2 (décembre 2021).
- (2021): Shape and Size of Particles Scaled from Concrete Surfaces during Salt Frost Testing and Rapid Freeze/thaw in Water. Dans: Nordic Concrete Research, v. 64, n. 1 (juin 2021).
- (2020): Review of Sprayability of Wet Sprayed Concrete. Dans: Nordic Concrete Research, v. 63, n. 2 (décembre 2020).
- (2019): Effect of AEA-SP Dosage Sequence on Air Entrainment in FA Concrete. Dans: Nordic Concrete Research, v. 61, n. 2 (décembre 2019).
- (2018): Filler and Water Reducer Effects on Sedimentation, Bleeding and Zeta-Potential of Cement Paste. Dans: Nordic Concrete Research, v. 58, n. 1 (juin 2018).
- (2022): Modeling of path-dependent phase change in sorption and freezing of pore water for cementitious materials. Dans: Journal of Building Engineering, v. 57 (octobre 2022).
- (2022): Rheology modelling of cement paste with manufactured sand and silica fume: Comparing suspension models with artificial neural network predictions. Dans: Construction and Building Materials, v. 317 (janvier 2022).
- (1996): Self healing of high strength concrete after deterioration by freeze/thaw. Dans: Cement and Concrete Research, v. 26, n. 1 (janvier 1996).
- (1996): Effect of cracking and healing on chloride transport in OPC concrete. Dans: Cement and Concrete Research, v. 26, n. 6 (juin 1996).
- (2018): Measuring Rheological Properties of Cement Pastes: Most common Techniques, Procedures and Challenges. Dans: RILEM Technical Letters, v. 2 (avril 2018).
- (2019): Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste. Dans: Construction and Building Materials, v. 218 (septembre 2019).
- (2014): Aerogel-incorporated concrete: An experimental study. Dans: Construction and Building Materials, v. 52 (février 2014).
- (2013): Analytical and experimental study on thermal conductivity of hardened cement pastes. Dans: Materials and Structures, v. 46, n. 9 (septembre 2013).
- (2011): Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar. Dans: Materials and Structures, v. 44, n. 8 (octobre 2011).
- (2016): Freeze–thaw resistance of sprayed concrete in tunnel linings. Dans: Materials and Structures, v. 49, n. 8 (août 2016).
- (1999): Effect of wind on drying from wet porous building materials surfaces—A simple model in steady state. Dans: Materials and Structures, v. 32, n. 1 (janvier 1999).
- (1997): Frost testing of high strength concrete: Frost/salt scaling at different cooling rates. Dans: Materials and Structures, v. 30, n. 1 (janvier 1997).
- (2008): Aggregate packing and -void saturation in mortar and concrete proportioning. Dans: Materials and Structures, v. 41, n. 4 (mai 2008).
- (2010): Effect of silica fume, steel fiber and ITZ on the strength and fracture behavior of mortar. Dans: Materials and Structures, v. 43, n. 1-2 (février 2010).
Structurae coopère avec
