0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Mohammad R. Irshidat ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Ahmed, Wasee / Rabie, Mohamed (2021): Feasibility of recycling waste carbon black in cement mortar production: Environmental life cycle assessment and performance evaluation. In: Construction and Building Materials, v. 296 (August 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123740

  2. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2022): Thermal behavior and post-heating fracture characteristics of polypropylene microfiber-reinforced geopolymer binders. In: Construction and Building Materials, v. 332 (May 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127310

  3. Irshidat, Mohammad R. / Al-Husban, Rami S. (2022): Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets. In: Frontiers of Structural and Civil Engineering, v. 16, n. 1 (January 2022).

    https://doi.org/10.1007/s11709-021-0787-8

  4. Irshidat, Mohammad R. / Haddad, Rami H. / Al-Amarat, Feda (2022): Effect of Heating Level on the Contribution of CFRP Bars in the Axial Load-carrying Capacity of RC Columns. In: International Journal of Civil Engineering, v. 20, n. 5 (January 2022).

    https://doi.org/10.1007/s40999-021-00680-2

  5. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Sustainable utilization of waste carbon black in alkali-activated mortar production. In: Case Studies in Construction Materials, v. 15 (December 2021).

    https://doi.org/10.1016/j.cscm.2021.e00743

  6. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Potential utilization of municipal solid waste incineration ashes as sand replacement for developing sustainable cementitious binder. In: Construction and Building Materials, v. 312 (December 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125488

  7. Barham, Wasim S. / Irshidat, Mohammad R. / Awawdeh, Abdelrahman (2021): Repair of Heat-Damaged RC Beams Using Micro-concrete Modified with Carbon Nanotubes. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (May 2021).

    https://doi.org/10.1007/s12205-021-0904-1

  8. Irshidat, Mohammad R. (2021): Bond strength evaluation between steel rebars and carbon nanotubes modified concrete. In: Case Studies in Construction Materials, v. 14 (June 2021).

    https://doi.org/10.1016/j.cscm.2020.e00477

  9. Irshidat, Mohammad R. / Haddad, Rami H. / Almahmoud, Hanadi (2015): Post-heating behavior of concrete beams reinforced with fiber reinforced polymer bars. In: Structural Engineering and Mechanics, v. 53, n. 6 (March 2015).

    https://doi.org/10.12989/sem.2015.53.6.1253

  10. Irshidat, Mohammad R. (2020): Improved bond behavior between FRP reinforcing bars and concrete with carbon nanotubes. In: Construction and Building Materials, v. 257 (October 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119562

  11. Irshidat, Mohammad R. / Al-Shannaq, Ammar (2019): Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate. In: Latin American Journal of Solids and Structures, v. 16, n. 9 ( 2019).

    https://doi.org/10.1590/1679-78255796

  12. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Hybrid effect of carbon nanotubes and polypropylene microfibers on fire resistance, thermal characteristics and microstructure of cementitious composites. In: Construction and Building Materials, v. 266 (January 2021).

    https://doi.org/10.1016/j.conbuildmat.2020.121154

  13. Irshidat, Mohammad R. / Al-Shannaq, Ammar (2018): Using textile reinforced mortar modified with carbon nano tubes to improve flexural performance of RC beams. In: Composite Structures, v. 200 (September 2018).

    https://doi.org/10.1016/j.compstruct.2018.05.088

  14. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. / Al-Shoubaki, Mahmoud (2015): Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns. In: Composite Structures, v. 134 (December 2015).

    https://doi.org/10.1016/j.compstruct.2015.08.108

  15. Al‐Nuaimi, Nasser / Irshidat, Mohammad R. / Salim, Soheb (2020): Effect of initial and final curing on performance of concrete in hot and arid climates. In: Structural Concrete, v. 21, n. 3 (June 2020).

    https://doi.org/10.1002/suco.201900340

  16. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2018): Thermal performance and fire resistance of nanoclay modified cementitious materials. In: Construction and Building Materials, v. 159 (January 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.10.127

  17. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2016): Effect of using carbon nanotube modified epoxy on bond–slip behavior between concrete and FRP sheets. In: Construction and Building Materials, v. 105 (February 2016).

    https://doi.org/10.1016/j.conbuildmat.2015.12.183

  18. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2017): Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP. In: Construction and Building Materials, v. 145 (August 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.04.047

  19. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2017): Repair of heat-damaged RC columns using carbon nanotubes modified CFRP. In: Materials and Structures, v. 50, n. 2 (April 2017).

    https://doi.org/10.1617/s11527-017-1034-6

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine