0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Mohammad R. Irshidat ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Ahmed, Wasee / Rabie, Mohamed (2021): Feasibility of recycling waste carbon black in cement mortar production: Environmental life cycle assessment and performance evaluation. In: Construction and Building Materials, v. 296 (August 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123740

  2. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2022): Thermal behavior and post-heating fracture characteristics of polypropylene microfiber-reinforced geopolymer binders. In: Construction and Building Materials, v. 332 (Mai 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127310

  3. Irshidat, Mohammad R. / Al-Husban, Rami S. (2022): Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets. In: Frontiers of Structural and Civil Engineering, v. 16, n. 1 (Januar 2022).

    https://doi.org/10.1007/s11709-021-0787-8

  4. Irshidat, Mohammad R. / Haddad, Rami H. / Al-Amarat, Feda (2022): Effect of Heating Level on the Contribution of CFRP Bars in the Axial Load-carrying Capacity of RC Columns. In: International Journal of Civil Engineering, v. 20, n. 5 (Januar 2022).

    https://doi.org/10.1007/s40999-021-00680-2

  5. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Sustainable utilization of waste carbon black in alkali-activated mortar production. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).

    https://doi.org/10.1016/j.cscm.2021.e00743

  6. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Potential utilization of municipal solid waste incineration ashes as sand replacement for developing sustainable cementitious binder. In: Construction and Building Materials, v. 312 (Dezember 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125488

  7. Barham, Wasim S. / Irshidat, Mohammad R. / Awawdeh, Abdelrahman (2021): Repair of Heat-Damaged RC Beams Using Micro-concrete Modified with Carbon Nanotubes. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (Mai 2021).

    https://doi.org/10.1007/s12205-021-0904-1

  8. Irshidat, Mohammad R. (2021): Bond strength evaluation between steel rebars and carbon nanotubes modified concrete. In: Case Studies in Construction Materials, v. 14 (Juni 2021).

    https://doi.org/10.1016/j.cscm.2020.e00477

  9. Irshidat, Mohammad R. / Haddad, Rami H. / Almahmoud, Hanadi (2015): Post-heating behavior of concrete beams reinforced with fiber reinforced polymer bars. In: Structural Engineering and Mechanics, v. 53, n. 6 (März 2015).

    https://doi.org/10.12989/sem.2015.53.6.1253

  10. Irshidat, Mohammad R. (2020): Improved bond behavior between FRP reinforcing bars and concrete with carbon nanotubes. In: Construction and Building Materials, v. 257 (Oktober 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119562

  11. Irshidat, Mohammad R. / Al-Shannaq, Ammar (2019): Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate. In: Latin American Journal of Solids and Structures, v. 16, n. 9 ( 2019).

    https://doi.org/10.1590/1679-78255796

  12. Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed (2021): Hybrid effect of carbon nanotubes and polypropylene microfibers on fire resistance, thermal characteristics and microstructure of cementitious composites. In: Construction and Building Materials, v. 266 (Januar 2021).

    https://doi.org/10.1016/j.conbuildmat.2020.121154

  13. Irshidat, Mohammad R. / Al-Shannaq, Ammar (2018): Using textile reinforced mortar modified with carbon nano tubes to improve flexural performance of RC beams. In: Composite Structures, v. 200 (September 2018).

    https://doi.org/10.1016/j.compstruct.2018.05.088

  14. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. / Al-Shoubaki, Mahmoud (2015): Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns. In: Composite Structures, v. 134 (Dezember 2015).

    https://doi.org/10.1016/j.compstruct.2015.08.108

  15. Al‐Nuaimi, Nasser / Irshidat, Mohammad R. / Salim, Soheb (2020): Effect of initial and final curing on performance of concrete in hot and arid climates. In: Structural Concrete, v. 21, n. 3 (Juni 2020).

    https://doi.org/10.1002/suco.201900340

  16. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2018): Thermal performance and fire resistance of nanoclay modified cementitious materials. In: Construction and Building Materials, v. 159 (Januar 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.10.127

  17. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2016): Effect of using carbon nanotube modified epoxy on bond–slip behavior between concrete and FRP sheets. In: Construction and Building Materials, v. 105 (Februar 2016).

    https://doi.org/10.1016/j.conbuildmat.2015.12.183

  18. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2017): Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP. In: Construction and Building Materials, v. 145 (August 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.04.047

  19. Irshidat, Mohammad R. / Al-Saleh, Mohammed H. (2017): Repair of heat-damaged RC columns using carbon nanotubes modified CFRP. In: Materials and Structures, v. 50, n. 2 (April 2017).

    https://doi.org/10.1617/s11527-017-1034-6

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine