Jiandong Huang 
- (2024): Modification Mechanism of MWCNTs and SBS Composite-Modified Asphalt Binder: Laboratory Investigation and Molecular Dynamic Simulation. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 9 (September 2024).
- (2024): Research on the migration law of aggregate particles in the compaction process of asphalt mixture based on discrete element method. In: Construction and Building Materials, v. 445 (September 2024).
- (2024): Evaluating and correlating asphalt binder and mixture fatigue properties considering aging conditions. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Building the future: Smart concrete as a key element in next-generation construction. In: Construction and Building Materials, v. 429 (May 2024).
- (2024): Prediction of Compressive Strength of Geopolymer Concrete Landscape Design: Application of the Novel Hybrid RF–GWO–XGBoost Algorithm. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2023): Laboratory investigations of the effects of asphalt mortar and its viscoelasticity on the workability of asphalt mixtures. In: Construction and Building Materials, v. 389 (July 2023).
- (2023): Influence of the composite interface on the mechanical properties of semi-flexible pavement materials. In: Construction and Building Materials, v. 397 (September 2023).
- (2023): Performance degradation of styrene-butadiene-styrene modified asphalt binder at ultra-high temperature: Process of construction in fluid mastic asphalt. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): ICA-LightGBM Algorithm for Predicting Compressive Strength of Geo-Polymer Concrete. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): Comparing the Performance of Historical and Regular Stone Pavement Structures in Urban Trafficked Areas through the Finite Element Method (FEM). In: Infrastructures, v. 8, n. 7 (30 June 2023).
- (2023): Repurposing Waste Polyurethane into Cleaner Asphalt Pavement Materials: Laboratory Investigation. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): Influence of asphalt mixture workability on the distribution uniformity of asphalt, aggregate particles and asphalt film during mixing process. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Refined decomposition: A new separation method for RAP materials and its effect on aggregate properties. In: Construction and Building Materials, v. 358 (December 2022).
- (2022): Compactness prediction of asphalt concrete using Ground-Penetrating Radar: A comparative study. In: Construction and Building Materials, v. 361 (December 2022).
- (2022): Evaluation of the significance of different mix design variables on asphalt mixtures’ cracking performance measured by laboratory performance tests. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Development of a New Stacking Model to Evaluate the Strength Parameters of Concrete Samples in Laboratory. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 6 (August 2022).
- (2021): Accurately predicting dynamic modulus of asphalt mixtures in low-temperature regions using hybrid artificial intelligence model. In: Construction and Building Materials, v. 297 (August 2021).
- (2021): Effect of nano-metakaolinite clay on the performance of cement-based materials at early curing age. In: Construction and Building Materials, v. 291 (July 2021).
- (2021): Evaluation of pore size distribution and permeability reduction behavior in pervious concrete. In: Construction and Building Materials, v. 290 (July 2021).
- (2021): Potential anti-vibration pavements with damping layer: Finite element (FE) modeling, validation, and parametrical studies. In: Construction and Building Materials, v. 281 (April 2021).
- (2021): Evaluation of workability and mechanical properties of asphalt binder and mixture modified with waste toner. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Fatigue prediction of semi-flexible composite mixture based on damage evolution. In: Construction and Building Materials, v. 318 (February 2022).
- (2021): Gradation optimization and strength mechanism of aggregate structure considering macroscopic and mesoscopic aggregate mechanical behaviour in porous asphalt mixture. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Estimating the Compressive Strength of Cement-Based Materials with Mining Waste Using Support Vector Machine, Decision Tree, and Random Forest Models. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Numerical Investigation on Time-Dependent Deformation in Roadway. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Influence of crumb rubber particle sizes on rutting, low temperature cracking, fracture, and bond strength properties of asphalt binder. In: Materials and Structures, v. 54, n. 2 (23 February 2021).
- (2021): Anti-rutting performance of the damping asphalt mixtures (DAMs) made with a high content of asphalt rubber (AR). In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Predicting the Permeability of Pervious Concrete Based on the Beetle Antennae Search Algorithm and Random Forest Model. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Finite Element (FE) Modeling of Indirect Tension to Cylindrical (IT-CY) Specimen Test for Damping Asphalt Mixtures (DAMs). In: Advances in Civil Engineering, v. 2020 (January 2020).
Structurae cooperates with
