Jian Huang 
- (2025): Comparative study of phosphate ester grafted polycarboxylate superplasticizer graphene oxide assembly (HPCE@GO) on improvement of GO dispersion and mechanical properties of ordinary Portland cement paste. In: Construction and Building Materials, v. 458 (January 2025).
- : Exact Solution of Nonlinear TVMD Based on Maximizing Damping Enhancement Effect for Acceleration Response Control. In: International Journal of Structural Stability and Dynamics.
- (2024): Experimental and Theoretical Study on Tensile Mechanical Properties of GFRP–Steel Composite Bars. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2024): Behavior of Existing Box Beams Repaired with High-Strength Mortar Layer and Ultra-High-Performance Concrete (UHPC) Overlay: Experimental, Numerical, and Theoretical Investigations. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Hybrid Intelligent Model for Estimating the Cost of Huizhou Replica Traditional Vernacular Dwellings. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Hydration mechanism of a sodium-doped phosphogypsum-based hemihydrate whisker (omongwaite) in supersulfated cement system. In: Construction and Building Materials, v. 427 (May 2024).
- (2024): C-S-H based nucleation seed prepared from waste glass powder and carbide slag and its application in Portland cement. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Effects of ring-type and straight steel fibres on the compressive performance of rubber-recycled aggregate concrete. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Effect of ventilation on thermal and humidity environment of the underground utility tunnel in the plum rain season in southern China: Field measurement and CFD simulation. In: Underground Space, v. 13 (December 2023).
- (2023): A deep learning framework based on improved self‐supervised learning for ground‐penetrating radar tunnel lining inspection. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 6 (October 2023).
- (2023): Efficient utilization of multi-source solid waste to prepare the novel core-shell structured lightweight aggregates and its immobilization for volatile heavy metals. In: Journal of Building Engineering, v. 71 (July 2023).
- (2022): Dispersing silica fume in cementitious materials by silane copolymerized polycarboxylate Superplasticizer: On the role of dispersion effectiveness as a function of silane concentration. In: Construction and Building Materials, v. 326 (April 2022).
- (2013): Automated tunnel rock classification using rock engineering systems. In: Engineering Geology, v. 156 (April 2013).
- (2022): High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions. In: Composite Structures, v. 290 (June 2022).
- (2022): Experimental study on wind-induced vibration and aerodynamic mitigation measures of a building over 800 meters. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Blockage effects on aerodynamics of isolated tall buildings under uniform turbulent flows. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 212 (May 2021).
- (2016): Bending and benchmark of zero Poisson’s ratio cellular structures. In: Composite Structures, v. 152 (September 2016).
- (2018): Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate. In: Construction and Building Materials, v. 162 (February 2018).
- (2020): Investigation of silica fume as foam cell stabilizer for foamed concrete. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Effect of different silica particles on flowability of gypsum powder for 3D powder printing. In: Construction and Building Materials, v. 217 (August 2019).
- (2019): Effect of silica fume particle dispersion and distribution on the performance of cementitious materials: A theoretical analysis of optimal sonication treatment time. In: Construction and Building Materials, v. 212 (July 2019).
- (2015): Experimental investigation on the properties and microstructure of magnesium oxychloride cement prepared with caustic magnesite and dolomite. In: Construction and Building Materials, v. 85 (June 2015).
- (2016): An experimental study on the lateral pressure of fresh concrete in formwork. In: Construction and Building Materials, v. 111 (May 2016).
- (2017): Influence of Ca/Si ratio of concrete pore solution on thaumasite formation. In: Construction and Building Materials, v. 153 (October 2017).
- (2019): Effect of mixing sequence of calcium ion and polycarboxylate superplasticizer on dispersion of a low grade silica fume in cement-based materials. In: Construction and Building Materials, v. 195 (January 2019).
- (2016): Effect of chemical admixtures on setting time, fluidity and mechanical properties of phosphorus gypsum based self-leveling mortar. In: KSCE Journal of Civil Engineering, v. 21, n. 5 (August 2016).
- (2017): Effect of Sodium Tripolyphosphate on Clay Tolerance of Polycarboxylate Superplasticizer. In: KSCE Journal of Civil Engineering, v. 22, n. 8 (November 2017).
- (2014): Effect of superplasticiser and sodium tripolyphosphate on fluidity of cement paste. In: Magazine of Concrete Research, v. 66, n. 23 (December 2014).
Structurae cooperates with
