Jian Huang 
- (2024): C-S-H based nucleation seed prepared from waste glass powder and carbide slag and its application in Portland cement. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Effects of ring-type and straight steel fibres on the compressive performance of rubber-recycled aggregate concrete. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Photocurable resin as rapid in-situ protective coating for slag concrete against dry shrinkage. In: Construction and Building Materials, v. 396 (September 2023).
- (2023): Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Numerical Investigations for Rock-Breaking Process and Cutter Layout Optimization of a PDC Drill Bit with Dual-Cutter. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2023): Effect of ventilation on thermal and humidity environment of the underground utility tunnel in the plum rain season in southern China: Field measurement and CFD simulation. In: Underground Space, v. 13 (Dezember 2023).
- (2023): A deep learning framework based on improved self‐supervised learning for ground‐penetrating radar tunnel lining inspection. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 6 (Oktober 2023).
- (2023): Efficient utilization of multi-source solid waste to prepare the novel core-shell structured lightweight aggregates and its immobilization for volatile heavy metals. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Meso-scale damage characteristics of low carbon concrete with recycled aggregate based on in-situ CT test. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): Dispersing silica fume in cementitious materials by silane copolymerized polycarboxylate Superplasticizer: On the role of dispersion effectiveness as a function of silane concentration. In: Construction and Building Materials, v. 326 (April 2022).
- (2013): Automated tunnel rock classification using rock engineering systems. In: Engineering Geology, v. 156 (April 2013).
- (2022): High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions. In: Composite Structures, v. 290 (Juni 2022).
- (2022): Experimental study on wind-induced vibration and aerodynamic mitigation measures of a building over 800 meters. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): On-demand setting of extrusion-based 3D printing gypsum using a heat-induced accelerator. In: Construction and Building Materials, v. 304 (Oktober 2021).
- (2019): Performance Assessment of the Complex Seepage-Control System at the Lu Dila Hydropower Station in China. In: International Journal of Geomechanics, v. 19, n. 3 (März 2019).
- (2021): Blockage effects on aerodynamics of isolated tall buildings under uniform turbulent flows. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 212 (Mai 2021).
- (2011): Numerical Modeling of Type I Circular Sedimentation Tank. In: Journal of Environmental Engineering (ASCE), v. 137, n. 3 (März 2011).
- (2016): Bending and benchmark of zero Poisson’s ratio cellular structures. In: Composite Structures, v. 152 (September 2016).
- (2018): Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate. In: Construction and Building Materials, v. 162 (Februar 2018).
- (2020): Investigation of silica fume as foam cell stabilizer for foamed concrete. In: Construction and Building Materials, v. 237 (März 2020).
- (2019): Effect of different silica particles on flowability of gypsum powder for 3D powder printing. In: Construction and Building Materials, v. 217 (August 2019).
- (2019): Effect of silica fume particle dispersion and distribution on the performance of cementitious materials: A theoretical analysis of optimal sonication treatment time. In: Construction and Building Materials, v. 212 (Juli 2019).
- (2015): Experimental investigation on the properties and microstructure of magnesium oxychloride cement prepared with caustic magnesite and dolomite. In: Construction and Building Materials, v. 85 (Juni 2015).
- (2016): An experimental study on the lateral pressure of fresh concrete in formwork. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2017): Influence of Ca/Si ratio of concrete pore solution on thaumasite formation. In: Construction and Building Materials, v. 153 (Oktober 2017).
- (2019): Effect of mixing sequence of calcium ion and polycarboxylate superplasticizer on dispersion of a low grade silica fume in cement-based materials. In: Construction and Building Materials, v. 195 (Januar 2019).
- (2016): Effect of chemical admixtures on setting time, fluidity and mechanical properties of phosphorus gypsum based self-leveling mortar. In: KSCE Journal of Civil Engineering, v. 21, n. 5 (August 2016).
- (2017): Effect of Sodium Tripolyphosphate on Clay Tolerance of Polycarboxylate Superplasticizer. In: KSCE Journal of Civil Engineering, v. 22, n. 8 (November 2017).
- (2014): Effect of superplasticiser and sodium tripolyphosphate on fluidity of cement paste. In: Magazine of Concrete Research, v. 66, n. 23 (Dezember 2014).
Structurae kooperiert mit
