Max A. N. Hendriks 
- (2024): A closed-form solution of dowel action based on beam on elastic foundation theory and fracture mechanics. In: Engineering Structures, v. 315 (September 2024).
- (2024): Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study. In: Engineering Structures, v. 318 (November 2024).
- (2024): Comparison of ground-structure and continuum based topology optimization methods for strut-and-tie model generation. In: Engineering Structures, v. 316 (October 2024).
- (2024): Maximum Drift Demands of Earthquake Damaged Reinforced Concrete Columns Based on Residual Flexure Cracks. In: Bulletin of Earthquake Engineering, v. 22, n. 8 (April 2024).
- (2023): Investigation of concrete crack kinematics through probability density field of the location of acoustic emission events. In: Construction and Building Materials, v. 400 (October 2023).
- (2024): Comparing the stretching technique and the wavelet cross-spectrum technique for measuring stress-induced wave-velocity changes in concrete. In: Automation in Construction, v. 158 (February 2024).
- (2023): Bridging the gap between mathematical optimization and structural engineering: Design, experiments and numerical simulation of optimized concrete girders. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2020): Inspection and Assessment of Corrosion in Pretensioned Concrete Bridge Girders Exposed to Coastal Climate. In: Infrastructures, v. 5, n. 9 (September 2020).
- (2023): Failure characteristics of reinforced concrete circular slabs subsequently subjected to fire exposure and static load: An experimental study. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2022): A closed‐form shear resistance model for regions of prestressed beams without flexural cracks. In: Structural Concrete, v. 23, n. 3 (May 2022).
- (2022): Developing a new acoustic emission source classification criterion for concrete structures based on signal parameters. In: Construction and Building Materials, v. 318 (February 2022).
- (2022): Lattice modeling and testing of aerated autoclaved concrete infilled frames. In: Engineering Structures, v. 251 (January 2022).
- (2021): Load effects in reinforced concrete beam bridges affected by alkali–silica reaction—Constitutive modelling including expansion, cracking, creep and crushing. In: Engineering Structures, v. 245 (October 2021).
- (2021): Experimental investigation on the structural response of RC slabs subjected to combined fire and blast. In: Structures, v. 31 (June 2021).
- (2021): Material Characterization Approach for Modeling High-Strength Concrete after Cooling from Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2019): Improvements of a Nonlinear Analysis Guideline for the Re-examination of Existing Urban Concrete Structures. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2018): Crack width calculation methods for large-scale concrete structures for the Ferry-Free E39. Presented at: IABSE Conference: Engineering the Developing World, Kuala Lumpur, Malaysia, 25-27 April 2018.
- (2020): Automated optimization-based generation and quantitative evaluation of Strut-and-Tie models. In: Computers & Structures, v. 238 (October 2020).
- (2020): A critical evaluation of topology optimization results for strut‐and‐tie modeling of reinforced concrete. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 8 (10 July 2020).
- (2020): Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices. In: Construction and Building Materials, v. 245 (June 2020).
- (2020): Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (February 2020).
- (2019): Durability of pretensioned concrete girders in coastal climate bridges: Basis for better maintenance and future design. In: Structural Concrete, v. 20, n. 6 (December 2019).
- (2018): Experimental and theoretical investigation of crack width calculation methods for RC ties. In: Structural Concrete, v. 19, n. 5 (October 2018).
- (2016): Influence of the Alkali-Silica Reaction on the Mechanical Degradation of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 6 (June 2016).
- (2018): Building response to tunnelling- and excavation-induced ground movements: using transfer functions to review the limiting tensile strain method. In: Structure and Infrastructure Engineering, v. 14, n. 6 (October 2018).
- (2016): The effect of interference of corrosion pits on the failure probability of a reinforced concrete beam. In: Engineering Structures, v. 114 (May 2016).
- (2015): Damage Functions for the Vulnerability Assessment of Masonry Buildings Subjected to Tunneling. In: Journal of Structural Engineering (ASCE), v. 141, n. 9 (September 2015).
- (2012): Experimental analysis of a masonry façade subject to tunnelling-induced settlement. In: Engineering Structures, v. 45 (December 2012).
- (2016): Catenary action effects on the structural robustness assessment of RC slab strips subjected to shear and tensile forces. In: Structural Concrete, v. 17, n. 6 (December 2016).
- (2014): Analytical and numerical evaluation of the design shear resistance of reinforced concrete slabs. In: Structural Concrete, v. 15, n. 3 (September 2014).
Structurae cooperates with
