0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Max A. N. Hendriks ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Lu, Jiandong / Yang, Yuguang / Hendriks, Max A. N. (2024): A closed-form solution of dowel action based on beam on elastic foundation theory and fracture mechanics. In: Engineering Structures, v. 315 (September 2024).

    https://doi.org/10.1016/j.engstruct.2024.118430

  2. Vandecruys, Eline / Hendriks, Max A. N. / Van de Velde, Menno / Lombaert, Geert / Verstrynge, Els (2024): Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study. In: Engineering Structures, v. 318 (November 2024).

    https://doi.org/10.1016/j.engstruct.2024.118758

  3. Xia, Yi / Liew, Andrew / Wu, Hongfei / Langelaar, Matthijs / Hendriks, Max A. N. / Yang, Yuanlong / Takalloozadeh, Meisam / Gilbert, Matthew (2024): Comparison of ground-structure and continuum based topology optimization methods for strut-and-tie model generation. In: Engineering Structures, v. 316 (Oktober 2024).

    https://doi.org/10.1016/j.engstruct.2024.118498

  4. Aydin, Beyazit Bestami / Binici, Baris / Aktas, Saime Selin / Hendriks, Max A. N. / Tuncay, Kagan (2024): Maximum Drift Demands of Earthquake Damaged Reinforced Concrete Columns Based on Residual Flexure Cracks. In: Bulletin of Earthquake Engineering, v. 22, n. 8 (April 2024).

    https://doi.org/10.1007/s10518-024-01922-z

  5. Zhang, Fengqiao / Yang, Yuguang / Hendriks, Max A. N. (2023): Investigation of concrete crack kinematics through probability density field of the location of acoustic emission events. In: Construction and Building Materials, v. 400 (Oktober 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132595

  6. Cheng, Hao / Weemstra, Cornelis / Hendriks, Max A. N. / Yang, Yuguang (2024): Comparing the stretching technique and the wavelet cross-spectrum technique for measuring stress-induced wave-velocity changes in concrete. In: Automation in Construction, v. 158 (Februar 2024).

    https://doi.org/10.1016/j.autcon.2023.105221

  7. Pressmair, Nadine / Xia, Yi / Wu, Hongfei / Langelaar, Matthijs / Hendriks, Max A. N. / Majdouba, Ahmad / Mogra, Mihir / Grisaro, Hezi / Amir, Oded / Kromoser, Benjamin (2023): Bridging the gap between mathematical optimization and structural engineering: Design, experiments and numerical simulation of optimized concrete girders. In: Structural Concrete, v. 24, n. 4 (5 Juli 2023).

    https://doi.org/10.1002/suco.202201096

  8. Osmolska, Magdalena J. / Hornbostel, Karla / Kanstad, Terje / Hendriks, Max A. N. / Markeset, Gro (2020): Inspection and Assessment of Corrosion in Pretensioned Concrete Bridge Girders Exposed to Coastal Climate. In: Infrastructures, v. 5, n. 9 (September 2020).

    https://doi.org/10.3390/infrastructures5090076

  9. Arano Barenys, Assis / Colombo, Matteo / Martinelli, Paolo / Øverli, Jan Arve / Hendriks, Max A. N. / Kanstad, Terje / di Prisco, Marco (2023): Failure characteristics of reinforced concrete circular slabs subsequently subjected to fire exposure and static load: An experimental study. In: Structural Concrete, v. 24, n. 1 (Februar 2023).

    https://doi.org/10.1002/suco.202200054

  10. Roosen, Marco A. / Yang, Yuguang / Veen, Cor / Schaafsma, Dick G. / Hendriks, Max A. N. (2022): A closed‐form shear resistance model for regions of prestressed beams without flexural cracks. In: Structural Concrete, v. 23, n. 3 (Mai 2022).

    https://doi.org/10.1002/suco.202100695

  11. Zhang, Fengqiao / Yang, Yuguang / Fennis, Sonja A. A. M. / Hendriks, Max A. N. (2022): Developing a new acoustic emission source classification criterion for concrete structures based on signal parameters. In: Construction and Building Materials, v. 318 (Februar 2022).

    https://doi.org/10.1016/j.conbuildmat.2021.126163

  12. Aydin, Beyazit B. / Binici, Baris / Hendriks, Max A. N. / Tuncay, Kagan (2022): Lattice modeling and testing of aerated autoclaved concrete infilled frames. In: Engineering Structures, v. 251 (Januar 2022).

    https://doi.org/10.1016/j.engstruct.2021.113467

  13. Kongshaug, Simen Sørgaard / Magne Larssen, Rolf / Hendriks, Max A. N. / Kanstad, Terje / Markeset, Gro (2021): Load effects in reinforced concrete beam bridges affected by alkali–silica reaction—Constitutive modelling including expansion, cracking, creep and crushing. In: Engineering Structures, v. 245 (Oktober 2021).

    https://doi.org/10.1016/j.engstruct.2021.112945

  14. Colombo, Matteo / Martinelli, Paolo / Arano, Assis / Øverli, Jan Arve / Hendriks, Max A. N. / Kanstad, Terje / di Prisco, Marco (2021): Experimental investigation on the structural response of RC slabs subjected to combined fire and blast. In: Structures, v. 31 (Juni 2021).

    https://doi.org/10.1016/j.istruc.2021.02.029

  15. Arano, Assis / Colombo, Matteo / Martinelli, Paolo / Øverli, Jan Arve / Hendriks, Max A. N. / Kanstad, Terje / di Prisco, Marco (2021): Material Characterization Approach for Modeling High-Strength Concrete after Cooling from Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (Mai 2021).

    https://doi.org/10.1061/(asce)mt.1943-5533.0003694

  16. de Boer, Ane / Hendriks, Max A. N. / Lantsoght, Eva O. L. (2019): Improvements of a Nonlinear Analysis Guideline for the Re-examination of Existing Urban Concrete Structures. Vorgetragen bei: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.

    https://doi.org/10.2749/newyork.2019.0425

  17. Tan, Reignard / Kanstad, Terje / Geiker, Mette R. / Hendriks, Max A. N. (2018): Crack width calculation methods for large-scale concrete structures for the Ferry-Free E39. Vorgetragen bei: IABSE Conference: Engineering the Developing World, Kuala Lumpur, Malaysia, 25-27 April 2018.

    https://doi.org/10.2749/kualalumpur.2018.0358

  18. Xia, Yi / Langelaar, Matthijs / Hendriks, Max A. N. (2020): Automated optimization-based generation and quantitative evaluation of Strut-and-Tie models. In: Computers & Structures, v. 238 (Oktober 2020).

    https://doi.org/10.1016/j.compstruc.2020.106297

  19. Xia, Yi / Langelaar, Matthijs / Hendriks, Max A. N. (2020): A critical evaluation of topology optimization results for strut‐and‐tie modeling of reinforced concrete. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 8 (10 Juli 2020).

    https://doi.org/10.1111/mice.12537

  20. Kongshaug, Simen Sørgaard / Oseland, Oddbjørn / Kanstad, Terje / Hendriks, Max A. N. / Rodum, Eva / Markeset, Gro (2020): Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices. In: Construction and Building Materials, v. 245 (Juni 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.118384

  21. Tan, Reignard / Hendriks, Max A. N. / Geiker, Mette / Kanstad, Terje (2020): Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (Februar 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002510

  22. Osmolska, Magdalena J. / Kanstad, Terje / Hendriks, Max A. N. / Hornbostel, Karla / Markeset, Gro (2019): Durability of pretensioned concrete girders in coastal climate bridges: Basis for better maintenance and future design. In: Structural Concrete, v. 20, n. 6 (Dezember 2019).

    https://doi.org/10.1002/suco.201900144

  23. Tan, Reignard / Eileraas, Kristoffer / Opkvitne, Ola / Žirgulis, Giedrius / Hendriks, Max A. N. / Geiker, Mette / Brekke, Dan-Evert / Kanstad, Terje (2018): Experimental and theoretical investigation of crack width calculation methods for RC ties. In: Structural Concrete, v. 19, n. 5 (Oktober 2018).

    https://doi.org/10.1002/suco.201700237

  24. Esposito, Rita / Anaç, Caner / Hendriks, Max A. N. / Copuroglu, Oguzhan (2016): Influence of the Alkali-Silica Reaction on the Mechanical Degradation of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 6 (Juni 2016).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001486

  25. Dalgic, Korhan Deniz / Hendriks, Max A. N. / Ilki, Alper (2018): Building response to tunnelling- and excavation-induced ground movements: using transfer functions to review the limiting tensile strain method. In: Structure and Infrastructure Engineering, v. 14, n. 6 (Oktober 2018).

    https://doi.org/10.1080/15732479.2017.1360364

  26. Kioumarsi, Mahdi M. / Hendriks, Max A. N. / Köhler, Jochen / Geiker, Mette R. (2016): The effect of interference of corrosion pits on the failure probability of a reinforced concrete beam. In: Engineering Structures, v. 114 (Mai 2016).

    https://doi.org/10.1016/j.engstruct.2016.01.058

  27. Giardina, Giorgia / Hendriks, Max A. N. / Rots, Jan G. (2015): Damage Functions for the Vulnerability Assessment of Masonry Buildings Subjected to Tunneling. In: Journal of Structural Engineering (ASCE), v. 141, n. 9 (September 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001162

  28. Giardina, Giorgia / Marini, Alessandra / Hendriks, Max A. N. / Rots, Jan G. / Rizzardini, Fabio / Giuriani, Ezio (2012): Experimental analysis of a masonry façade subject to tunnelling-induced settlement. In: Engineering Structures, v. 45 (Dezember 2012).

    https://doi.org/10.1016/j.engstruct.2012.06.042

  29. Belletti, Beatrice / Damoni, Cecilia / Cervenka, Vladimir / Hendriks, Max A. N. (2016): Catenary action effects on the structural robustness assessment of RC slab strips subjected to shear and tensile forces. In: Structural Concrete, v. 17, n. 6 (Dezember 2016).

    https://doi.org/10.1002/suco.201500157

  30. Belletti, Beatrice / Damoni, Cecilia / Hendriks, Max A. N. / de Boer, Ane (2014): Analytical and numerical evaluation of the design shear resistance of reinforced concrete slabs. In: Structural Concrete, v. 15, n. 3 (September 2014).

    https://doi.org/10.1002/suco.201300069

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine