Min He 
- : Seismic Performance of a Suspension Bridge Considering Saddle–Cable Slippage. In: International Journal of Structural Stability and Dynamics.
- (2024): Numerical Parameter Analysis of High-Strength Steel Frame with Y-Eccentric Brace Using Variable Replaceable Link. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Research on the static and dynamic tensile damage mechanism of concrete based on fuzzy sets. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Strength optimization of transverse retrofitting device for seismic isolated bridge based on seismic repair cost ratio. In: Engineering Structures, v. 317 (October 2024).
- (2024): Review and comparison of methods and benchmarks for automatic modal identification based on stabilization diagram. In: Journal of Traffic and Transportation Engineering (English Edition), v. 11, n. 2 (April 2024).
- (2024): Feasibility study of TSOB replacing standard high-strength bolt in T-stub connection. In: Structures, v. 62 (April 2024).
- (2023): Seismic Performance of Steel-SMA Reinforced Columns: Numerical Investigation. In: International Journal of Structural Stability and Dynamics, v. 24, n. 16 (December 2023).
- (2024): Prediction method for bending moment capacities and failure modes of TSOBs bolted I-beam to hollow section square column. In: Journal of Constructional Steel Research, v. 214 (March 2024).
- (2023): Analytical Model for Progressive Collapse of RC Frame Beam-Column Substructures Using Multi-Gene Genetic Programming. In: International Journal of Structural Stability and Dynamics, v. 23, n. 13 (February 2023).
- (2023): Strength, microstructure, CO2 emission and economic analyses of low concentration phosphoric acid-activated fly ash geopolymer. In: Construction and Building Materials, v. 374 (April 2023).
- (2024): A new model to simulate the site-specific traffic load with consideration of precise axle load and microscopic behavior. In: Structure and Infrastructure Engineering, v. 20, n. 6 (October 2024).
- (2023): Seismic fragility and resilience assessment of bridge columns with dual-replaceable composite link beam under near-fault GMs. In: Structures, v. 47 (January 2023).
- (2024): Identification, tracking and warning of vortex induced vibration using k-means clustering method. In: Structure and Infrastructure Engineering, v. 20, n. 3 (July 2024).
- (2022): An improved micro model for stochastic traffic load simulation with consideration of axle load and microscopic behavior. In: Advances in Structural Engineering, v. 25, n. 9 (April 2022).
- (2022): Short-Term Traffic Flow Prediction of Expressway Considering Spatial Influences. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 6 (June 2022).
- (2022): Unified method for fully automated modal identification and tracking with consideration of sensor deployment. In: Engineering Structures, v. 260 (June 2022).
- (2022): Synthesis and properties of a fire-retardant coating based on intercalated expandable graphite-modified cellulose for steel structures. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Continuous Modal Identification and Tracking of a Long-Span Suspension Bridge Using a Robust Mixed-Clustering Method. In: Journal of Bridge Engineering (ASCE), v. 27, n. 3 (March 2022).
- (2022): An Efficient and Robust Nonlinear Dynamic Analysis Method for Framed Structures Using the Rigid Body Rule. In: International Journal of Structural Stability and Dynamics, v. 22, n. 3-4 ( 2022).
- (2021): Distribution Analysis and Forecast of Traffic Flow of an Expressway Electronic Toll Collection Lane. In: Journal of Transportation Engineering, Part A: Systems, v. 147, n. 8 (August 2021).
- (2015): Research on Conventional Performance of Modified Bio-Asphalt. In: Journal of Highway and Transportation Research and Development (English Edition), v. 9, n. 2 (June 2015).
- (2021): Fully automated precise operational modal identification. In: Engineering Structures, v. 234 (May 2021).
- (2020): Reconstructing the Mass Distribution Function of a Two-Span Beam With an Overhang via the Fundamental Mode. In: International Journal of Structural Stability and Dynamics, v. 20, n. 14 (December 2020).
- (2020): Risk-informed sensitivity analysis and optimization of seismic mitigation strategy using Gaussian process surrogate model. In: Soil Dynamics and Earthquake Engineering, v. 138 (November 2020).
- (2020): Optimising intelligent control of a highway bridge with magnetorheological dampers. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 173, n. 3 (March 2020).
- (2019): Optimal Seismic Intensity Measure Selection for Isolated Bridges under Pulse-Like Ground Motions. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2012): Some Qualitative Properties of the Vibration Modes of the Continuous System of a Beam with One or Two Overhangs. In: Journal of Engineering Mechanics (ASCE), v. 138, n. 8 (August 2012).
- (2013): Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt. In: Construction and Building Materials, v. 47 (October 2013).
- (2015): Intelligent active control of a benchmark cable-stayed bridge. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 168, n. 12 (December 2015).
- (2018): Modeling of Coupled Heat-Moisture Transfer and Deformation Behavior of Frozen Soil. In: Soil Mechanics and Foundation Engineering, v. 55, n. 3 (July 2018).
Structurae cooperates with
