Giada Gasparini 
- (2023): Wire‐and‐Arc Additive Manufacturing for lattice steel structures: overview of the experimental characterization on dot‐by‐dot rods. In: ce/papers, v. 6, n. 3-4 (September 2023).
- (2016): A Structural Analysis of the Modena Cathedral. In: International Journal of Architectural Heritage, v. 10, n. 2-3 (January 2016).
- (2021): Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers. In: Frontiers in Built Environment, v. 7 (January 2021).
- (2021): A time domain approach for data interpretation from long‐term static monitoring of historical structures. In: Structural Control and Health Monitoring, v. 28, n. 5 (12 April 2021).
- (2019): Optimization studies on diagrid columns realized with Wire-and-Arc Additive Manufacturing process. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2011): Seismic design of a precast r.c. structure equipped with viscous dampers. In: Earthquakes and Structures, v. 2, n. 3 (September 2011).
- (2011): A Special Solution for Lateral-Resisting Systems Capable of Multiple Seismic Performances. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2016): Shaking-table tests of flat-bottom circular silos containing grain-like material. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 1 (January 2016).
- (2013): Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls. In: Engineering Structures, v. 54 (September 2013).
- (2013): Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems. In: Bulletin of Earthquake Engineering, v. 11, n. 5 (March 2013).
- (2015): Peak velocities estimation for a direct five-step design procedure of inter-storey viscous dampers. In: Bulletin of Earthquake Engineering, v. 14, n. 2 (October 2015).
- (2015): Seismic Modal Contribution Factors. In: Bulletin of Earthquake Engineering, v. 13, n. 10 (April 2015).
- (2014): A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions. In: Engineering Structures, v. 76 (October 2014).
- (2014): Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls. In: Engineering Structures, v. 76 (October 2014).
- (2016): Seismic horizontal forces exerted by granular material on flat bottom silos: experimental and analytical results. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): Stiffness-Strength-Ductility Design Approach: an application to a five-storey steel building structure. Presented at: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae cooperates with
