Giada Gasparini 
- (2024): Editorial: Additive manufacturing in construction. In: Frontiers in Built Environment, v. 10 (Februar 2024).
- (2024): Investigation on the elastic flexural stiffness of dot-by-dot wire-and-arc additively manufactured stainless steel bars. In: Engineering Structures, v. 306 (Mai 2024).
- (2023): Explorations of efficient design solutions for Wire-and-Arc Additive manufacturing in construction. In: Structures, v. 56 (Oktober 2023).
- (2023): A multi-performance seismic design procedure to incorporate Crescent Shaped Braces in mid-rise frame structures. In: Soil Dynamics and Earthquake Engineering, v. 164 (Januar 2023).
- (2022): Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading. In: Construction and Building Materials, v. 318 (Februar 2022).
- (2018): Energy Dissipation Systems for Seismic Vibration-Induced Damage Mitigation in Building Structures: Development, Modeling, Analysis, and Design. In: Shock and Vibration, v. 2018 ( 2018).
- (2021): Comprehensive Review on the Dynamic and Seismic Behavior of Flat-Bottom Cylindrical Silos Filled With Granular Material. In: Frontiers in Built Environment, v. 7 (Januar 2021).
- (2021): Experimental behaviour of Wire‐and‐Arc Additively Manufactured stainless steel rods. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Analytical estimation of the key performance points of the tensile force-displacement response of Crescent Shaped Braces. In: Soil Dynamics and Earthquake Engineering, v. 148 (September 2021).
- (2021): On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements. In: Journal of Constructional Steel Research, v. 178 (März 2021).
- (2020): Assessment of design mechanical parameters and partial safety factors for Wire-and-Arc Additive Manufactured stainless steel. In: Engineering Structures, v. 225 (Dezember 2020).
- (2021): Estimating Fundamental Dynamic Properties of Structures with Supplemental Dampers by Means of Generalized Single Degree of Freedom Systems. In: Journal of Earthquake Engineering, v. 26, n. 7 (März 2021).
- (2020): Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2020): High performance mortar for ductile seismic-resistant unreinforced masonry systems. In: Construction and Building Materials, v. 245 (Juni 2020).
- (2015): An approach for the mechanical characterisation of the Asinelli Tower (Bologna) in presence of insufficient experimental data. In: Journal of Cultural Heritage, v. 16, n. 4 (Juli 2015).
- (2016): Application of a Direct Procedure for the Seismic Retrofit of a R/C School Building Equipped with Viscous Dampers. In: Frontiers in Built Environment, v. 1 (Januar 2016).
- (2014): The first year of activities of the "Observatory Claudio Ceccoli", on the defects of the building structures. Vorgetragen bei: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2008): Numerical Verification of the Effectiveness of the "Alpha" Method for the Estimation of the Maximum Rotational Elastic Response of Eccentric Systems. In: Journal of Earthquake Engineering, v. 12, n. 2 ( 2008).
- (2010): A Five-Step Procedure for the Dimensioning of Viscous Dampers to Be Inserted in Building Structures. In: Journal of Earthquake Engineering, v. 14, n. 3 ( 2010).
- (2015): Italy's new forensic engineering research centre: a progress report. In: Proceedings of the Institution of Civil Engineers - Forensic Engineering, v. 168, n. 1 (Februar 2015).
- (2015): Crescent shaped braces for the seismic design of building structures. In: Materials and Structures, v. 48, n. 5 (Mai 2015).
- (2014): Multi-performance seismic design through an enhanced first-storey isolation system. In: Engineering Structures, v. 59 (Februar 2014).
- (2016): A comprehensive study on the seismic response of one-storey asymmetric systems. In: Bulletin of Earthquake Engineering, v. 15, n. 4 (November 2016).
- (2012): On the evaluation of the horizontal forces produced by grain-like material inside silos during earthquakes. In: Bulletin of Earthquake Engineering, v. 10, n. 5 (Mai 2012).
- (2018): A "direct five-step procedure" for the preliminary seismic design of buildings with added viscous dampers. In: Engineering Structures, v. 173 (Oktober 2018).
- (2018): Coupled Response of Frame Structures Connected to a Strongback. In: Journal of Structural Engineering (ASCE), v. 144, n. 9 (September 2018).
- (2016): Application of the Equivalent Static Analysis procedure for the seismic design of buildings with added viscous dampers. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): A case study of a building in L’Aquila, Italy for evaluating the effects of masonry infills on the seismic behavior of r.c. frame structures. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2010): Identification Of Uniform Hazard Time Histories for Seismic Design. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2010): Correlations Between the Experimental Results of Pseudo-Static Tests with Cyclic Horizontal Load on Concrete/Polystyrene Sandwich Bearing Panels and their analytical counterparts. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae kooperiert mit
