Amir Fam 
- (2024): Impact Loading Behavior of Large-Scale Two-Way Sandwich Panels with Natural Fiber–Reinforced Polymer Faces. In: Journal of Composites for Construction, v. 28, n. 1 (February 2024).
- (2023): Parametric investigation of continuous beams strengthened with near surface mounted FRP bars. In: Engineering Structures, v. 293 (October 2023).
- (2016): Numerical Modeling of Concrete-Filled FRP Tubes’ Dynamic Behavior under Blast and Impact Loading. In: Journal of Structural Engineering (ASCE), v. 142, n. 2 (February 2016).
- (2023): Modeling of a concrete floor incorporating GFRP Stay-in-Place structural form. In: Engineering Structures, v. 278 (March 2023).
- (2022): How Concrete Filling Fundamentally Changes Stress–Strain Curve of Angle-Ply FRP Tubes in Tension. In: Journal of Composites for Construction, v. 26, n. 5 (October 2022).
- (2021): Numerical and analytical investigation for ultimate capacity of steel beams strengthened with GFRP plates. In: Engineering Structures, v. 243 (September 2021).
- : Impact Behaviour of Sandwich Panels Made of Flax Fiber-Reinforced Bio-Based Polymer Face Sheets and Foam Cores. Presented at: Structures Congress 2018, Fort Worth, Texas, 19-21 April 2018.
- (2011): Numerical analysis of pultruded GFRP box girders supporting adhesively-bonded concrete deck in flexure. In: Engineering Structures, v. 33, n. 12 (December 2011).
- (2014): High cycle fatigue under reversed bending of sandwich panels with GFRP skins and polyurethane foam core. In: Composite Structures, v. 113 (July 2014).
- (2018): Numerical study on the bond between CFRP rod panels (CRPs) and concrete. In: Construction and Building Materials, v. 177 (July 2018).
- (2014): Modeling of Flexural Behavior and Punching Shear of Concrete Bridge Decks with FRP Stay-in-Place Forms Using the Theory of Plates. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 12 (December 2014).
- (2019): Influence of Resin Biocontent and Type on Bond Strength between FRP Wet Layup and Concrete. In: Journal of Composites for Construction, v. 23, n. 4 (August 2019).
- (2016): New Shear Connector Design for Insulated Concrete Sandwich Panels Using Basalt Fiber-Reinforced Polymer Bars. In: Journal of Composites for Construction, v. 20, n. 4 (August 2016).
- (2015): Performance of Concrete Beams Reinforced with Basalt FRP for Flexure and Shear. In: Journal of Composites for Construction, v. 19, n. 2 (April 2015).
- (2009): Investigating a Structural Form System for Concrete Girders Using Commercially Available GFRP Sheet-Pile Sections. In: Journal of Composites for Construction, v. 13, n. 5 (October 2009).
- (2013): Investigation of Various GFRP Shear Connectors for Insulated Precast Concrete Sandwich Wall Panels. In: Journal of Composites for Construction, v. 17, n. 5 (October 2013).
- (2013): Longitudinal Bending and Failure of GFRP Pipes Buried in Dense Sand under Relative Ground Movement. In: Journal of Composites for Construction, v. 17, n. 5 (October 2013).
- (2016): In-Plane Bending and Failure Mechanism of Sandwich Beams with GFRP Skins and Soft Polyurethane Foam Core. In: Journal of Composites for Construction, v. 20, n. 1 (February 2016).
- (2012): New Bridge Deck Cast onto Corrugated GFRP Stay-in-Place Structural Forms with Interlocking Connections. In: Journal of Composites for Construction, v. 16, n. 1 (February 2012).
- (2014): Modulus Effect of Bonded CFRP Laminates Used for Repairing Preyield and Postyield Cracked Concrete Beams. In: Journal of Composites for Construction, v. 18, n. 4 (August 2014).
- (2012): Long-Term Performance of GFRP Tubes Filled with Concrete and Subjected to Salt Solution. In: Journal of Composites for Construction, v. 16, n. 2 (April 2012).
- (2014): Mechanical characteristics of glass fibre reinforced polymer made of furfuryl alcohol bio-resin. In: Materials and Structures, v. 47, n. 7 (July 2014).
- (2008): Moment Connection of Concrete-Filled Fiber Reinforced Polymer Tubes by Direct Embedment into Footings. In: Advances in Structural Engineering, v. 11, n. 5 (October 2008).
- (2014): Performance of a cured-in-place pressure pipe liner passing through a pipe section without structural integrity. In: Tunnelling and Underground Space Technology, v. 42 (May 2014).
- (2016): Numerical modeling and experimental validation of axially loaded slender sandwich panels with soft core and various rib configurations. In: Engineering Structures, v. 118 (July 2016).
- (2015): Improved design-oriented confinement models for FRP-wrapped concrete cylinders based on statistical analyses. In: Engineering Structures, v. 87 (March 2015).
- (2006): Modeling of Prestressed Concrete-Filled Circular Composite Tubes Subjected to Bending and Axial Loads. In: Journal of Structural Engineering (ASCE), v. 132, n. 3 (March 2006).
- (2018): Numerical study on mechanical and adhesive splices for ribbed GFRP plates used in concrete beams. In: Engineering Structures, v. 174 (November 2018).
- (2003): Large scale testing and analysis of hybrid concrete/composite tubes for circular beam-column applications. In: Construction and Building Materials, v. 17, n. 6-7 (September 2003).
- (2015): Numerical Determination of Equivalent Reflected Blast Parameters Acting on Circular Cross Sections. In: International Journal of Protective Structures, v. 6, n. 1 (March 2015).
Structurae cooperates with
