Amir Fam 
- (2024): Effect of GFRP bar diameter and concrete cover on bond and development length in UHPFRC. In: Construction and Building Materials, v. 418 (March 2024).
- (2023): Design equations for thermal bowing and composite degree of concrete sandwich panels. In: Engineering Structures, v. 290 (September 2023).
- (2023): Evaluation of Spliced UHM CFRP Strip Panels for Strengthening Steel Beams. In: Journal of Composites for Construction, v. 27, n. 1 (February 2023).
- (2021): Confinement model for concrete wrapped with fiber reinforced cementitious mortar. In: Construction and Building Materials, v. 312 (December 2021).
- (2021): Empirical Design Equation for Compression Strength of Lightweight FRP Sandwich Panel Walls. In: Journal of Architectural Engineering (ASCE), v. 27, n. 3 (September 2021).
- (2021): Design equation for concrete-filled FRP tubes in flexure including damage effects. In: Engineering Structures, v. 239 (July 2021).
- (2021): Confinement model for FRP-wrapped circular columns when the wraps are subjected to damage. In: Construction and Building Materials, v. 275 (March 2021).
- (2021): Development Length of Small-Diameter Basalt FRP Bars in Normal- and High-Strength Concrete. In: Journal of Composites for Construction, v. 25, n. 1 (February 2021).
- (2021): Development length of sand-coated GFRP bars embedded in Ultra-High performance concrete with very small cover. In: Construction and Building Materials, v. 270 (February 2021).
- (2017): Experimental and numerical investigations of thermal properties of insulated concrete sandwich panels with fiberglass shear connectors. In: Energy and Buildings, v. 145 (June 2017).
- (2008): Cracking patterns and strength of CFT beams under different moment gradients. In: Composite Structures, v. 84, n. 2 (July 2008).
- (2020): The effect of tube damage on flexural strength of ±55° angle-ply concrete-filled FRP tubes. In: Construction and Building Materials, v. 240 (April 2020).
- (2020): Damage Threshold of Near-Cross-Ply Tubes Used in Concrete-Filled FRP Tubes Loaded in Flexure. In: Journal of Composites for Construction, v. 24, n. 2 (April 2020).
- (2018): The effect of bio-based content in resin blends on tensile properties of FRP wet layup systems. In: Construction and Building Materials, v. 168 (April 2018).
- (2018): Durability under freeze–thaw cycles of concrete beams retrofitted with externally bonded FRPs using bio-based resins. In: Construction and Building Materials, v. 168 (April 2018).
- (2010): Effect of Wrinkles on the Circumferential Strength of a Cast-in-Place Composite Polymer Liner Used in Retrofitting Pressure Pipes. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 12 (December 2010).
- (2015): Effect of Internal Ribs on Fatigue Performance of Sandwich Panels with GFRP Skins and Polyurethane Foam Core. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 2 (February 2015).
- (2016): Design Equations for Concrete Bridge Decks with FRP Stay-in-Place Structural Forms. In: Journal of Composites for Construction, v. 20, n. 5 (October 2016).
- (2014): Environmental Aging Effect on Tensile Properties of GFRP Made of Furfuryl Alcohol Bioresin Compared to Epoxy. In: Journal of Composites for Construction, v. 18, n. 5 (October 2014).
- (2015): Durability of Bridge Deck with FRP Stay-in-Place Structural Forms under Freeze-Thaw Cycles. In: Journal of Composites for Construction, v. 19, n. 4 (August 2015).
- (2014): Durability of Concrete Cylinders Wrapped with GFRP Made from Furfuryl Alcohol Bioresin. In: Journal of Composites for Construction, v. 18, n. 6 (December 2014).
- (2017): Effect of Column Size and Reinforcement Ratio on Shear Strength of Glass Fiber-Reinforced Polymer Reinforced Concrete Two-Way Slabs. In: ACI Structural Journal, v. 114, n. 4 (July 2017).
- (2013): The effects of splices and bond on performance of bridge deck with FRP stay-in-place forms at various boundary conditions. In: Engineering Structures, v. 56 (November 2013).
- (2015): Dynamic behaviour of concrete filled FRP tubes subjected to impact loading. In: Engineering Structures, v. 100 (October 2015).
- (2011): Enhancing flexural performance of free-standing tubular steel poles using an optimal partial concrete fill. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 38, n. 10 (October 2011).
- (2006): Effects of driving forces and bending fatigue on structural performance of a novel concrete-filled fibre-reinforced-polymer tube flexural pile. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 6 (June 2006).
- (2008): Development of a novel pole using spun-cast concrete inside glass-fiber-reinforced polymer tubes. In: PCI Journal, v. 53, n. 3 (March 2008).
- (2008): Effects of freezing and thawing cycles and sustained loading on compressive strength of precast concrete composite piles. In: PCI Journal, v. 53, n. 1 (January 2008).
- (2016): Durability in a Salt Solution of Pultruded Composite Materials Used in Structural Sections for Bridge Deck Applications. In: Journal of Bridge Engineering (ASCE), v. 21, n. 1 (January 2016).
- (2017): Elastic Analysis of Steel Beams Strengthened with GFRP Plates Including Preexisting Loading Effects. In: Journal of Structural Engineering (ASCE), v. 143, n. 12 (December 2017).
Structurae cooperates with
