Yu Chen 
- (2015): Experimental and numerical research on out-of-plane flexural property of plates reinforced SHS X-joints. In: Thin-Walled Structures, v. 94 (September 2015).
- (2017): Experimental and numerical investigations on collar plate and doubler plate reinforced SHS T-joints under axial compression. In: Thin-Walled Structures, v. 110 (January 2017).
- (2024): Effect of steel fiber shape and content on printability, microstructure and mechanical properties of 3D printable high strength cementitious materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Experimental and numerical research on shear performance of GFRP bar reinforced seawater sea-sand concrete deep beams without stirrups. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Experimental and numerical investigations on shear behavior of high-strength bolted connections after impact. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Evaluation on effect of carbonation on chloride binding capacity and stability of cement hydration products with multiple testing methods. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Effect of P2O5 incorporated in slag on the hydration characteristics of cement-slag system. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): Effect of different organic layered double hydroxides on the anti-aging property of bitumen. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): The effect of slag chemistry on the reactivity of synthetic and commercial slags. In: Construction and Building Materials, v. 335 (June 2022).
- (2022): Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials. In: Construction and Building Materials, v. 332 (May 2022).
- (2021): Effect of crumb rubber size on the performance of rubberized asphalt with bio-oil pretreatment. In: Construction and Building Materials, v. 285 (May 2021).
- (2022): Evaluation of test methods for fracture resistance of high modulus asphalt binders from rheological and mechanical perspectives. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Double shear tests of high-strength steel bolted connections with reduced tightening. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Effect of Prior Cyclic Loading on Triaxial Compression Strength of Sliding Zone Soil of the Huangtupo Landslide. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2022): Effect of destructive earthquake on the population-economy-space urbanization at county level-a case study on Dujiangyan county, China. In: Sustainable Cities and Society, v. 76 (January 2022).
- (2021): Dynamic Analysis of Planar Multibody Systems Considering Contact Characteristics of Ball Bearing Joint. In: International Journal of Structural Stability and Dynamics, v. 21, n. 11 (August 2021).
- (2021): Experimental and numerical investigations on pre-twisted steel box-section columns. In: Engineering Structures, v. 246 (November 2021).
- (2021): Element Failure Probability of Soil Slope under Consideration of Random Groundwater Level. In: International Journal of Geomechanics, v. 21, n. 7 (July 2021).
- (2006): Equivalent Parameters of Embedded PZT Elements for Concrete Structure Monitoring. In: Structural Health Monitoring, v. 5, n. 4 (December 2006).
- (2020): Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study. In: Construction and Building Materials, v. 262 (November 2020).
- (2015): Experimental and finite element analysis research on cold-formed steel lipped channel beams under web crippling. In: Thin-Walled Structures, v. 87 (February 2015).
- (2019): Effect of steel and polypropylene fibers on the quasi-static and dynamic splitting tensile properties of high-strength concrete. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Enhanced model for thermally induced transverse cracking of asphalt pavements. In: Construction and Building Materials, v. 206 (May 2019).
- (2013): Effects of an Asphalt Rubber Membrane Interlayer on Pavement Reflective Cracking Performance. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 12 (December 2013).
- (2016): Experimental and numerical investigations on steel–concrete–PVC SHS joints under axial compression. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Experimental and finite element analysis research on I-beam under web crippling. In: Materials and Structures, v. 49, n. 1-2 (January 2016).
- (2018): Experimental and numerical investigations on flexural behaviour of CFRP reinforced concrete-filled stainless steel CHS tubes. In: Engineering Structures, v. 156 (February 2018).
- (2018): Dynamic Indentation Characteristics for Various Spacings and Indentation Depths: A Study Based on Laboratory and Numerical Tests. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Doubly unusual 3D lattice honeycomb displaying simultaneous negative and zero Poisson's ratio properties. In: Smart Materials and Structures, v. 27, n. 4 (April 2018).
- (2018): Evaluation of crumb rubber modification and short-term aging on the rutting performance of bioasphalt. In: Construction and Building Materials, v. 193 (December 2018).
Structurae cooperates with
