Yu Chen 
- (2025): Investigating the anti-ageing property of SBS copolymer modified bitumen incorporating surface organic layered double hydroxides. In: Construction and Building Materials, v. 463 (February 2025).
- (2025): Load transfer mechanism and design strength of hybrid bolted joint with friction- and bearing-type connections. In: Structures, v. 71 (January 2025).
- (2024): Investigation of polyurea coating influence on dynamic mechanical properties of concrete. In: Structures, v. 69 (November 2024).
- (2025): Indoor environment and brain health across the life course: A systematic review. In: Building and Environment, v. 267 (January 2025).
- (2024): Investigation of Intraclass Correlation of Seismic Capacity for RC Bridge Piers Based on Hierarchical Model. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 10, n. 3 (September 2024).
- (2024): Influence of the closed end on the smoke propagation and temperature profile in urban utility tunnel fires. In: Tunnelling and Underground Space Technology, v. 150 (August 2024).
- (2023): Load‐Bearing Capacity of Support Block for Temporary Bridge Girder End with L‐Shaped Notch. In: ce/papers, v. 6, n. 5 (September 2023).
- (2024): Intelligent detection of hidden distresses in asphalt pavement based on GPR and deep learning algorithm. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Machine-learning-based performance prediction of the energy pile heat pump system. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Mechanical behavior of hybrid joint with bearing-type and slip-critical bolted connections. In: Journal of Constructional Steel Research, v. 211 (December 2023).
- (2023): Integrating Climate Change Projections in Building Performance Simulations: Case Study of 17 North American Cities. In: Journal of Architectural Engineering (ASCE), v. 29, n. 3 (September 2023).
- (2023): Investigation on hysteretic performance of assembled H-shaped steel frame-corrugated steel plate shear wall with different corrugated orientation and wavelength. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Influence of cyclic hardening characteristic on seismic performance of welded austenitic stainless steel H-section beam-column. In: Engineering Structures, v. 288 (August 2023).
- (2023): Influence of residential indoor environment on quality of life in China. In: Building and Environment, v. 232 (March 2023).
- (2023): Insight into the effects of waste vegetable oil on self-healing behavior of bitumen binder. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Low temperature performance evaluation of asphalt binders and mastics based on relaxation characteristics. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): Investigation of hot spot stress for welded tubular K-joints with stiffeners. In: Journal of Constructional Steel Research, v. 197 (October 2022).
- (2022): Load transferring mechanism of long riveted joint partially replaced by high-strength bolts. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2022): Influence of residential indoor environment on self-rated health in China: a cross-sectional study. In: Science and Technology for the Built Environment, v. 28, n. 7 (August 2022).
- (2022): Investigation on various section GFRP profile strengthening concrete-filled GFRP tubular columns. In: Composite Structures, v. 283 (March 2022).
- (2021): The integration model of objective and subjective data of residential indoor environment quality in Northeast China based on structural equation modeling. In: Building Simulation, v. 15, n. 5 (October 2021).
- (2018): Mechanical and Propagating Behaviors of Single-Flawed Rock Samples with Hydraulic Pressure and Uniaxial Compression Conditions. In: International Journal of Geomechanics, v. 18, n. 7 (July 2018).
- (2021): Influence of a hybrid combination of steel and polypropylene fibers on concrete toughness. In: Construction and Building Materials, v. 275 (March 2021).
- (2020): Laboratory and Field Experimental Study on the Vacuum Preloading Method with Pumping and Discharging. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2021): The influence of equal amplitude high stress repeated loading on the mechanical and deformation characteristics of rubber concrete. In: Construction and Building Materials, v. 266 (January 2021).
- (2021): Mechanical properties of carbon fiber reinforced concrete (CFRC) after exposure to high temperatures. In: Composite Structures, v. 256 (January 2021).
- (2020): Investigation on flexural behavior of double-layer toughened sandwich glass with trilateral simple support. In: Composite Structures, v. 252 (November 2020).
- (2003): Investigation of thermal benefits of rooftop garden in the tropical environment. In: Building and Environment, v. 38, n. 2 (February 2003).
- (2016): Investigation on SCFs of concrete-filled circular chord and square braces K-joints under balanced axial loading. In: Steel and Composite Structures, v. 21, n. 6 ( 2016).
- (2017): Investigation of grouted stainless steel SHS tubular X- and T-joints subjected to axial compression. In: Engineering Structures, v. 150 (November 2017).
Structurae cooperates with
