Peng Chen 
- (2024): Design-Level Seismic Estimation of Self-Centering Energy Dissipation–Braced Frame Structures with Partial Recentering Capacity. In: Journal of Structural Engineering (ASCE), v. 150, n. 8 (August 2024).
- (2024): An experimental study on global motions and structural internal loads of a 5 MW floating wind turbine supported on a multi-segment semi-submersible hull in shallow water. In: Marine Structures, v. 95 (May 2024).
- (2024): Development and experimental validation of an FBG-based substructure cross-sectional load measurement approach for a semi-submersible floating wind turbine. In: Engineering Structures, v. 303 (March 2024).
- (2024): Experimental and numerical study on the seismic behavior of groove grouting precast concrete shear walls with different joint types. In: Structures, v. 59 (January 2024).
- (2023): Determining a Key Service Area of Feeder Buses for Rail Transit Station Based on Potential Railway Demand. In: KSCE Journal of Civil Engineering, v. 27, n. 12 (October 2023).
- (2023): A compatible uniaxial Bouc–Wen model for accurate estimation of residual deformation of seismically isolated structures. In: Engineering Structures, v. 297 (December 2023).
- (2023): Calibration of brightness of virtual reality light sources based on user perception in the real environment. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Enhanced design and experimental investigation of disc spring‐based self‐centering buckling‐restrained braces with a compounded combination mode. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 10 (May 2023).
- (2023): An Analytical Algorithm for Determining Optimal Thin-Walled Hollow Pier Configuration with Sunlight Temperature Differences. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): A decoupled algorithm for cable parameter identification by frequency‐ratio‐offset. In: Computer-Aided Civil and Infrastructure Engineering, v. 38, n. 14 (July 2023).
- (2022): Flexural Behavior of Lattice Girder Slabs with Different Connections: Experimental Study. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Effect of activator properties on drying shrinkage of alkali-activated fly ash and slag. In: Journal of Building Engineering, v. 62 (December 2022).
- (2022): Hysteretic behavior of high damping rubber bearings under multiaxial excitation. In: Soil Dynamics and Earthquake Engineering, v. 163 (December 2022).
- (2023): A generalized model of lead rubber bearing considering large strain stiffening and degradation. In: Engineering Structures, v. 275 (January 2023).
- (2022): Analysis of Key Disciplinary Parameters in Floating Offshore Wind Turbines with An AI-Based SADA Method. In: China Ocean Engineering, v. 36, n. 4 (August 2022).
- (2022): Experimental investigation on earthquake-resilient steel beam-to-column joints with replaceable buckling-restrained fuses. In: Journal of Constructional Steel Research, v. 196 (September 2022).
- (2022): Analytical and numerical investigations of base isolation system with negative stiffness devices. In: Engineering Structures, v. 268 (October 2022).
- (2022): Axial-load response of CFST stub columns with external stainless steel and recycled aggregate concrete: Testing, mechanism analysis and design. In: Engineering Structures, v. 256 (April 2022).
- (2022): Firefly algorithm-based cellular automata for reproducing urban growth and predicting future scenarios. In: Sustainable Cities and Society, v. 76 (January 2022).
- (2022): Basalt‐polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 2: Numerical and parametric analysis. In: Structural Concrete, v. 23, n. 1 (January 2022).
- (2022): Basalt‐polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 1: Experimental program. In: Structural Concrete, v. 23, n. 1 (January 2022).
- (2021): Control and prevention of gas explosion in soft ground tunneling using slurry shield TBM. In: Tunnelling and Underground Space Technology, v. 113 (July 2021).
- (2021): Analysis on the excavation management system of slurry shield TBM in permeable sandy ground. In: Tunnelling and Underground Space Technology, v. 113 (July 2021).
- (2018): Effects of Indirect and Direct Coal-to-Liquid Fuel on Combustion, Performance, and Emissions in a Six-Cylinder Heavy-Duty Diesel Engine. In: Journal of Energy Engineering, v. 144, n. 3 (June 2018).
- (2017): A GPS data-based analysis of built environment influences on bicyclist route preferences. In: International Journal of Sustainable Transportation, v. 12, n. 3 (August 2017).
- (2021): Development and validation of a versatile hysteretic model for pre-compressed self-centering buckling-restrained brace. In: Journal of Constructional Steel Research, v. 177 (February 2021).
- (2018): Confinement path-dependent analytical model for FRP-confined concrete and concrete-filled steel tube subjected to axial compression. In: Composite Structures, v. 201 (October 2018).
- (2020): Exposure level and distribution of airborne bacteria and fungi in an urban utility tunnel: A case study. In: Tunnelling and Underground Space Technology, v. 96 (February 2020).
- (2019): Analytical and Numerical Investigation of Quasi-Zero Stiffness Vertical Isolation System. In: Journal of Engineering Mechanics (ASCE), v. 145, n. 6 (June 2019).
- (2018): Experimental study on seismic performance of rocking buckling-restrained brace steel frame with liftable column base. In: Journal of Constructional Steel Research, v. 143 (April 2018).
Structurae cooperates with
