Lin Chen 
- (2023): Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Collision damage quantification of RC pier columns coupling axial, flexural and shear effects. In: Structures, v. 58 (December 2023).
- (2023): Dynamic modeling and analysis of hanger cables with spacers and dampers for vibration mitigation. In: Structures, v. 57 (November 2023).
- (2023): Damping and tuning of inerter-based dampers for cable vibration mitigation considering girder vibrations. In: Engineering Structures, v. 296 (December 2023).
- (2023): Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer. In: Smart Materials and Structures, v. 32, n. 10 (30 August 2023).
- (2022): Energy absorption performance of steel plate-polyurethane foam composite protective structures. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Damping of long-span suspension bridges with damped outriggers. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Experimental and numerical investigation on collapse behavior of precast reinforced concrete beam-column sub-assemblages with cast-in-place ECC joints. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Adaptive Passive Negative Stiffness and Damping for Retrofit of Existing Tall Buildings with Tuned Mass Damper: TMD-NSD. In: Journal of Structural Engineering (ASCE), v. 148, n. 11 (November 2022).
- (2022): Adaptive Stiffness Structures with Dampers: Seismic and Wind Response Reduction Using Passive Negative Stiffness and Inerter Systems. In: Journal of Structural Engineering (ASCE), v. 148, n. 11 (November 2022).
- (2015): Cable with discrete negative stiffness device and viscous damper: passive realization and general characteristics. In: Smart Structures and Systems, v. 15, n. 3 (March 2015).
- (2019): A CNN-integrated percussion method for detection of FRP–concrete interfacial damage with FEM reconstruction. In: Structural Health Monitoring, v. 22, n. 1 (November 2019).
- (2022): Dynamic three-point flexural performance of unsaturated polyester polymer concrete at different curing ages. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Analysis of the use rate of equal arc-shaped bamboo splits. In: Construction and Building Materials, v. 302 (October 2021).
- (2019): Damage Analysis of Reinforced Concrete Piers under Vehicle Collision. Presented at: Structures Congress 2019, Orlando, Florida, 24-27 April 2019.
- (2019): An artificial neural network identification method for thermal resistance of exterior walls of buildings based on numerical experiments. In: Building Simulation, v. 12, n. 3 (March 2019).
- (2021): Compressive behaviour and fragment size distribution model for failure mode prediction of rubber concrete under impact loads. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Characteristics of space network system formed by the constituent elements in urban streets: Tianzifang in Shanghai as a case study. In: Journal of Asian Architecture and Building Engineering, v. 20, n. 6 (September 2021).
- (2020): A comparative study of multi-mode cable vibration control using viscous and viscoelastic dampers through field tests on the Sutong Bridge. In: Engineering Structures, v. 224 (December 2020).
- (2020): Bayesian model selection for the nonlinear hysteretic model of CLT connections. In: Engineering Structures, v. 223 (November 2020).
- (2020): Characteristics, Correlations of Traditional Street Space Elements and Tourist Density Following Spontaneous Renovation: A Case Study on Suzhou’s Shantang Street. In: Journal of Asian Architecture and Building Engineering, v. 20, n. 1 (June 2020).
- (2020): Cable Reliability Assessments for Cable-Stayed Bridges using Identified Tension Forces and Monitored Loads. In: Journal of Bridge Engineering (ASCE), v. 25, n. 7 (July 2020).
- (2016): Dynamic Interaction Between Rigid Surface Foundations on Multi-Layered Half Space. In: International Journal of Structural Stability and Dynamics, v. 16, n. 5 (April 2016).
- (2016): Damage Detection Based on Structural Responses Induced by Traffic Load: Methodology and Application. In: International Journal of Structural Stability and Dynamics, v. 16, n. 4 (March 2016).
- (2019): Damping effects of nonlinear dampers on a shallow cable. In: Engineering Structures, v. 196 (October 2019).
- (2016): The Combined Force Characteristics for The Pavement Layer of Steel Decks Under The Influence of Vehicle Load. Presented at: IABSE Conference: Bridges and Structures Sustainability - Seeking Intelligent Solutions, Guangzhou, China, 8-11 May 2016.
- (2016): Dynamic Interaction between Rigid Foundations on Multi-layered Stratum. In: Journal of Earthquake Engineering, v. 20, n. 4 ( 2016).
- (2017): Cables interconnected with tuned inerter damper for vibration mitigation. In: Engineering Structures, v. 151 (November 2017).
- (2004): Experimental Studies on Shear Strength of Steel–Concrete Composite Beams. In: Journal of Structural Engineering (ASCE), v. 130, n. 8 (August 2004).
- (2014): Active earth pressure of retaining wall considering wall movement. In: European Journal of Environmental and Civil Engineering, v. 18, n. 8 (April 2014).
Structurae cooperates with
