Lei Chen 
- (2024): Identifying dynamic interaction patterns in mandatory and discretionary lane changes using graph structure. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 5 (February 2024).
- (2023): Hysteretic performance of self-centering buckling-restrained braces with embedded friction spring. In: Engineering Structures, v. 280 (April 2023).
- (2022): Influence of chloride salt type on chloride ion diffusion performance of alkali-activated slag mortar. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Influence of curing temperature on freeze-thaw resistance of limestone powder hydraulic concrete. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Experimental and Numerical Investigation of Plastic–Concrete Waterproof Walls of an Underground Granary Subject to Combined Bending Moment and Water Pressure. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2019): Geological Exploration Using Integrated Geophysical Methods in Tunnel: a Case. In: Geotechnical and Geological Engineering, v. 38, n. 2 (20 December 2019).
- (2020): Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel. In: Fire and Materials, v. 44, n. 7 (28 August 2020).
- (2018): Experimental Study on Temperature Distribution of Ceiling Jet in Tunnel Fires under Natural Ventilation. In: Procedia Engineering, v. 211 ( 2018).
- (2022): Influence of Corrosion on Anchoring Bond Behavior of Jointed Rock Mass. In: KSCE Journal of Civil Engineering, v. 26, n. 4 (January 2022).
- (2022): Failure Mechanism and Energy Damage Evolution of Deep Sandstone Anchored by Carbon Fiber. In: KSCE Journal of Civil Engineering, v. 26, n. 4 (January 2022).
- (2021): Identification of concrete aggregates using K-means clustering and level set method. In: Structures, v. 34 (December 2021).
- (2021): Improved SVR Method for Predicting the Cutting Force of a TBM Cutter Using Linear Cutting Machine Test Data. In: KSCE Journal of Civil Engineering, v. 25, n. 11 (August 2021).
- (2021): Enhancement of thermal conductivity by graphene as additive in lauric-stearic acid/treated diatomite composite phase change materials for heat storage in building envelope. In: Energy and Buildings, v. 246 (September 2021).
- (2019): Experimental study on maximum smoke temperature beneath the ceiling induced by carriage fire in a tunnel with ceiling smoke extraction. In: Sustainable Cities and Society, v. 44 (January 2019).
- (2015): Influence of opening area ratio on natural ventilation in city tunnel under block transportation. In: Sustainable Cities and Society, v. 19 (December 2015).
- (2020): Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): Influence of low-temperature curing on the mechanical strength, hydration process, and microstructure of alkali-activated fly ash and ground granulated blast furnace slag mortar. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Laboratory and Field Experimental Study on the Vacuum Preloading Method with Pumping and Discharging. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2017): An experimental study on mechanical properties of fiber-reinforced concrete of energy piles. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2020): Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites. In: Composite Structures, v. 252 (November 2020).
- (2021): Influence of curing temperature on the mechanical properties and microstructure of limestone powder mass concrete. In: Structural Concrete, v. 22 (January 2021).
- (2020): Experiment on the Segment Model of a Plain Concrete Arch Bridge Reinforced with UHPC Composite Arch Circle. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): Experimental Study on the Deterioration Rules of Anchoring Performance of Rock Mass under Different Joints Distribution. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Influence of sulfate salt type on passive film of steel in simulated concrete pore solution. In: Construction and Building Materials, v. 223 (October 2019).
- (2019): The effects of the soft magnetic alloys' material characteristics on resonant magnetoelectric coupling for magnetostrictive/piezoelectric composites. In: Smart Materials and Structures, v. 28, n. 4 (April 2019).
- (2019): Experimental Study on Corrosion of Anchored Rock Mass for Half-Through Intermittent Joints. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Experimental study of the mechanical properties of reinforced concrete compression members under the combined action of sustained load and corrosion. In: Construction and Building Materials, v. 202 (March 2019).
- (2014): Maximizing the Computational Efficiency of Temporary Housing Decision Support Following Disasters. In: Journal of Computing in Civil Engineering, v. 28, n. 1 (January 2014).
- (2010): Enhanced magnetoelectric effects in laminate composites of Terfenol-D/Pb(Zr, TiO)3with high-permeability FeCuNbSiB ribbon. In: Smart Materials and Structures, v. 19, n. 11 (November 2010).
- (2016): Experimental study on seismic performance of reinforced concrete column retrofitted by asymmetric increased single lateral section. In: Advances in Structural Engineering, v. 20, n. 9 (December 2016).
Structurae cooperates with
