Chun Chen 
- (2023): Revealing the difference between creep behavior of hydration products of Portland cement and alkali-activated slag paste at early age. In: Journal of Building Engineering, v. 77 (October 2023).
- (2019): The microstructural change of C-S-H at elevated temperature in Portland cement/GGBFS blended system. In: Cement and Concrete Research, v. 123 (September 2019).
- (2023): Predicting spatial distribution of ultraviolet irradiance and disinfection of exhaled bioaerosols with a modified irradiance model. In: Building and Environment, v. 228 (January 2023).
- (2022): Study of the influence of sand on rheological properties, bubble features and buildability of fresh foamed concrete for 3D printing. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Smart control of window and air cleaner for mitigating indoor PM2.5 with reduced energy consumption based on deep reinforcement learning. In: Building and Environment, v. 224 (October 2022).
- (2021): Properties of dredged sludge solidified with alkali-activated slag-based materials and blended with copper slag as fine aggregates of mortars. In: Construction and Building Materials, v. 312 (December 2021).
- (2022): Predicting transient particle transport in periodic ventilation using Markov chain model with pre-stored transition probabilities. In: Building and Environment, v. 211 (March 2022).
- (2022): Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations. In: Journal of Building Engineering, v. 50 (June 2022).
- (2021): Morphological and mineralogical insights into acetic acid modifying and hydraulic process on steel slag for enhanced reactivity. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): A reinforcement learning approach for control of window behavior to reduce indoor PM2.5 concentrations in naturally ventilated buildings. In: Building and Environment, v. 200 (August 2021).
- (2018): A simple method for differentiating direct and indirect exposure to exhaled contaminants in mechanically ventilated rooms. In: Building Simulation, v. 11, n. 5 (September 2018).
- (2019): Modeling transient particle transport by fast fluid dynamics with the Markov chain method. In: Building Simulation, v. 12, n. 5 (August 2019).
- (2021): Investigation of pressure drop in flexible ventilation ducts under different compression ratios and bending angles. In: Building Simulation, v. 14, n. 4 (February 2021).
- (2015): Optimization of air supply location, size, and parameters in enclosed environments using a computational fluid dynamics-based adjoint method. In: Journal of Building Performance Simulation, v. 9, n. 2 (April 2015).
- (2021): An optimization approach for fabricating electrospun nanofiber air filters with minimized pressure drop for indoor PM2.5 control. In: Building and Environment, v. 188 (January 2021).
- (2015): Inverse design of the thermal environment in an airliner cabin by use of the CFD-based adjoint method. In: Energy and Buildings, v. 104 (October 2015).
- (2016): A method of assessing the energy cost saving from using an effective door closer. In: Energy and Buildings, v. 118 (April 2016).
- (2016): Modeling of gasper-induced jet flow and its impact on cabin air quality. In: Energy and Buildings, v. 127 (September 2016).
- (2018): Relationship between pressure drop and face velocity for electrospun nanofiber filters. In: Energy and Buildings, v. 158 (January 2018).
- (2018): An ordered probability model for predicting outdoor thermal comfort. In: Energy and Buildings, v. 168 (June 2018).
- (2020): Modeling transient particle transport in transient indoor airflow by fast fluid dynamics with the Markov chain method. In: Building and Environment, v. 186 (December 2020).
- (2020): Influence of surface roughness on particle deposition distribution around multi-slot cabin supply air nozzles of commercial airplanes. In: Building and Environment, v. 176 (June 2020).
- (2018): Influence of natural ventilation rate on indoor PM2.5 deposition. In: Building and Environment, v. 144 (October 2018).
- (2016): Modeling particle deposition on the surfaces around a multi-slot diffuser. In: Building and Environment, v. 107 (October 2016).
- (2015): A Markov chain model for predicting transient particle transport in enclosed environments. In: Building and Environment, v. 90 (August 2015).
- (2012): A methodology for predicting particle penetration factor through cracks of windows and doors for actual engineering application. In: Building and Environment, v. 47 (January 2012).
- (2011): Preventing the entry of outdoor particles with the indoor positive pressure control method: Analysis of influencing factors and cost. In: Building and Environment, v. 46, n. 5 (May 2011).
- (2010): A simplified methodology for the prediction of mean air velocity and particle concentration in isolation rooms with downward ventilation systems. In: Building and Environment, v. 45, n. 8 (August 2010).
- (2019): The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Products and properties of steam cured cement mortar containing lithium slag under partial immersion in sulfate solution. In: Construction and Building Materials, v. 220 (September 2019).
Structurae cooperates with
