Chun Chen 
- (2024): Design optimization of floor plan for public housing buildings in Hong Kong with consideration of natural ventilation, noise, and daylighting. In: Building and Environment, v. 263 (September 2024).
- (2024): Developing a deep neural network model for predicting ventilation rates in public housing buildings in Hong Kong. In: Energy and Buildings, v. 307 (März 2024).
- (2024): Fast prediction of particle transport in complex indoor environments using a Lagrangian-Markov chain model with coarse grids. In: Energy and Buildings, v. 306 (März 2024).
- (2023): Effect of low-calcium and high-magnesium ferronickel slag on the microstructure and micromechanical properties of alkali-activated blended ground granulated blast furnace slag. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Cheaper radiative cooling paint by milling larger glass bubbles. In: Energy and Buildings, v. 298 (November 2023).
- (2023): Far-UVC disinfection of airborne and surface virus in indoor environments: Laboratory experiments and numerical simulations. In: Building and Environment, v. 245 (November 2023).
- (2023): Developing a survival probability-based Lagrangian model for predicting ultraviolet disinfection of bioaerosols in enclosed environments. In: Building and Environment, v. 244 (Oktober 2023).
- (2023): Energy-efficient control of indoor PM2.5 and thermal comfort in a real room using deep reinforcement learning. In: Energy and Buildings, v. 295 (September 2023).
- (2023): Experimental behavior of truss‐confined buckling‐restrained braces. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 3 (10 April 2023).
- (2023): Effect of metakaolin on the microstructure of cement-based artificial marble slabs incorporating natural marble offcuts under vacuum vibration compaction method. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): Bond behavior between steel bars and 3D printed concrete: Effect of concrete rheological property, steel bar diameter and paste coating. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): A combined deep learning and physical modelling method for estimating air pollutants’ source location and emission profile in street canyons. In: Building and Environment, v. 219 (Juli 2022).
- (2022): Air infiltration rates in residential units of a public housing estate in Hong Kong. In: Building and Environment, v. 219 (Juli 2022).
- (2021): Experiments and finite element analysis for detecting the embedded defects in concrete using PZT transducers. In: Construction and Building Materials, v. 292 (Juli 2021).
- (2022): An improved Markov chain model with modified turbulence diffusion for predicting indoor particle transport. In: Building and Environment, v. 209 (Februar 2022).
- (2021): Exploring the feasibility of predicting contaminant transport using a stand-alone Markov chain solver based on measured airflow in enclosed environments. In: Building and Environment, v. 202 (September 2021).
- (2021): Coupling spectral-dependent radiative cooling with building energy simulation. In: Building and Environment, v. 197 (Juni 2021).
- (2021): Exploring the relationship between particle deposition and near-wall turbulence quantities in the built environment. In: Building and Environment, v. 196 (Juni 2021).
- (2021): Effect of nano-alumina modified foaming agents on properties of foamed concrete. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2012): Characterizing the household energy consumption in heritage Nanjing Tulou buildings, China: A comparative field survey study. In: Energy and Buildings, v. 49 (Juni 2012).
- (2013): A field investigation and comparative study of indoor environmental quality in heritage Chinese rural buildings with thick rammed earth wall. In: Energy and Buildings, v. 62 (Juli 2013).
- (2019): Comparison of the linear regression, multinomial logit, and ordered probability models for predicting the distribution of thermal sensation. In: Energy and Buildings, v. 188-189 (April 2019).
- (2020): Computer-aided design of a new cabin supply air nozzle in commercial airplanes for reducing particle deposition. In: Building and Environment, v. 186 (Dezember 2020).
- (2020): Hydration and soundness properties of phosphoric acid modified steel slag powder. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Influence of fiber diameter, filter thickness, and packing density on PM2.5 removal efficiency of electrospun nanofiber air filters for indoor applications. In: Building and Environment, v. 170 (März 2020).
- (2019): Experimental measurements and large eddy simulation of particle deposition distribution around a multi-slot diffuser. In: Building and Environment, v. 150 (März 2019).
- (2019): Differentiating between indoor exposure to PM2.5 of indoor and outdoor origin using time-resolved monitoring data. In: Building and Environment, v. 147 (Januar 2019).
- (2018): Experimental and modeling study of pressure drop across electrospun nanofiber air filters. In: Building and Environment, v. 142 (September 2018).
- (2013): A hybrid model for investigating transient particle transport in enclosed environments. In: Building and Environment, v. 62 (April 2013).
- (2013): Development of a lightweight epoxy asphalt mixture for bridge decks. In: Construction and Building Materials, v. 48 (November 2013).
Structurae kooperiert mit
