Guido Camata 
- : Discontinuum Micromodelling of Unstrengthened and FRCM-Strengthened Masonry Cross-Vaults Subjected to Seismic Excitation. In: International Journal of Architectural Heritage.
- (2024): Local infill-frame interaction under seismic loads: Investigation through refined micro-modeling. In: Engineering Structures, v. 315 (September 2024).
- (2024): Historical Evolution of the Impact of Seismic Incident Angles on the Safety Assessment of Various Building Construction Typologies. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2023): Experimental and numerical insights on the in-plane behaviour of unreinforced and TRM/SRG retrofitted brick masonry walls by diagonal compression and shear-compression testing. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Analytical and experimental shear evaluation of GFRP-reinforced concrete beams. In: Materials and Structures, v. 56, n. 10 (3 November 2023).
- (2023): Effects of Multi-Directional Seismic Input on Non-Linear Static Analysis of Existing Reinforced Concrete Structures. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Effects of the extended N2 method on non-linear static procedures of reinforced concrete frame structures. In: Soil Dynamics and Earthquake Engineering, v. 173 (October 2023).
- (2023): Influence of the modelling approach on the seismic assessment of RC structures by nonlinear static analyses. In: Soil Dynamics and Earthquake Engineering, v. 172 (September 2023).
- (2023): FRCM retrofitting techniques for masonry walls: a literature review and some laboratory tests. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Evaluation of the additional shear demand due to frame-infill interaction: a new capacity model. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Micro-modelling of stone masonry template buildings as a strategy for seismic risk assessment in developing countries. In: Engineering Structures, v. 274 (January 2023).
- (2022): Modelling and Seismic Response Analysis of Italian Pre-Code and Low-Code Reinforced Concrete Buildings. Part II: Infilled Frames. In: Journal of Earthquake Engineering, v. 27, n. 6 (May 2022).
- (2022): Modelling and Seismic Response Analysis of Italian pre-code and low-code Reinforced Concrete Buildings. Part I: Bare Frames. In: Journal of Earthquake Engineering, v. 27, n. 6 (May 2022).
- (2022): Experimental cyclic behaviour of shear masonry walls reinforced with single and double layered Steel Reinforced Grout. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar. In: Composite Structures, v. 283 (March 2022).
- (2021): Nonlinear modeling of the seismic response of masonry structures: critical review and open issues towards engineering practice. In: Bulletin of Earthquake Engineering, v. 20, n. 4 (November 2021).
- (2019): Experimental assessment of confined masonry walls retrofitted with SRG under lateral cyclic loads. In: Engineering Structures, v. 199 (November 2019).
- (2020): Numerical analysis of bonding between masonry and steel reinforced grout using a plastic–damage model for lime–based mortar. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Comparison Between Phenomenological and Fiber-Section Non-linear Models. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2020): In-plane shear behaviour by diagonal compression testing of brick masonry walls strengthened with basalt and steel textile reinforced mortars. In: Construction and Building Materials, v. 240 (April 2020).
- (2020): Experimental and analytical bond behaviour of masonry strengthened with steel reinforced grout (SRG). In: Construction and Building Materials, v. 238 (March 2020).
- (2015): Influence of ground motion selection methods on seismic directionality effects. In: Earthquakes and Structures, v. 8, n. 1 (January 2015).
- (2018): Modeling and Seismic Response Analysis of Italian Code-Conforming Reinforced Concrete Buildings. In: Journal of Earthquake Engineering, v. 22 ( 2018).
- (2019): Nonlinear analysis of masonry structures using fiber‐section line elements. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 12 (10 October 2019).
- (2004): Analysis of Test Specimens for Cohesive Near-Bond Failure of Fiber-Reinforced Polymer-Plated Concrete. In: Journal of Composites for Construction, v. 8, n. 6 (December 2004).
- (2004): Failure Mode Analyses of Reinforced Concrete Beams Strengthened in Flexure with Externally Bonded Fiber-Reinforced Polymers. In: Journal of Composites for Construction, v. 8, n. 2 (April 2004).
- (2005): Evaluation of GFRP Honeycomb Beams for the O'Fallon Park Bridge. In: Journal of Composites for Construction, v. 9, n. 6 (December 2005).
- (2017): Micro-scale continuous and discrete numerical models for nonlinear analysis of masonry shear walls. In: Construction and Building Materials, v. 149 (September 2017).
- (2015): Advanced frame element for seismic analysis of masonry structures: model formulation and validation. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 14 (November 2015).
- (2017): Analysis of the performance in the linear field of Equivalent-Frame Models for regular and irregular masonry walls. In: Engineering Structures, v. 145 (August 2017).
Structurae cooperates with
