Bruno Briseghella 
- (2024): New S-g-C3N4 based photocatalytic mortar with long-term photocatalytic performance by constructing three-dimensional structure Mg-Al layered double hydroxides. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): A piece-wise linear model for modelling the tension-stiffening effect in steel-reinforced UHPC composites. In: Composite Structures, v. 345 (October 2024).
- : Probabilistic corrosion hazard maps for reinforced concrete infrastructure in coastal regions. In: Structure and Infrastructure Engineering.
- (2023): Probabilistic Capacity Model for Concrete-Filled Steel Tubes. Presented at: IABSE Symposium: Long Span Bridges, Istanbul, Turkey, 26-28 April 2023.
- (2023): Numerical Study on Influence of Mass on Dynamic Performance of Piles with Pre-hole Seismic Isolation System in IABs. Presented at: IABSE Symposium: Long Span Bridges, Istanbul, Turkey, 26-28 April 2023.
- (2023): Prediction of the mechanical performance of compressed circular CFST columns with circumferential debonding gap. In: Journal of Constructional Steel Research, v. 208 (September 2023).
- (2023): Rebar Replacement in Severely Damaged RC Bridge Column Plastic Hinges: Design Criteria and Experimental Investigation. In: Journal of Structural Engineering (ASCE), v. 149, n. 3 (March 2023).
- (2022): Numerical Study on Influence of Input Wave’s Frequency on Dynamic Pre-Hole Isolation Pile-Soil Interaction in IABs. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2023): Probabilistic formulation for the q-factor of piles with damping pre-hole. In: Bulletin of Earthquake Engineering, v. 21, n. 8 (April 2023).
- (2022): Probabilistic Assessment of a Light-Timber Frame Shear Wall with Variable Pinching under Repeated Earthquakes. In: Journal of Structural Engineering (ASCE), v. 148, n. 11 (November 2022).
- (2022): Probabilistic axial capacity model for concrete-filled steel tubes accounting for load eccentricity and debonding. In: Engineering Structures, v. 268 (October 2022).
- (2022): Numerical simulation and simplified calculation of the effective slab width for composite cable-stayed bridges. In: Structures, v. 39 (May 2022).
- (2021): Optimum design of piles with pre-hole filled with high-damping material: Experimental tests and analytical modeling. In: Soil Dynamics and Earthquake Engineering, v. 151 (December 2021).
- (2021): Numerical analyses on flexural performance of prefabricated UHPC link slab. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): Numerical analyses on mechanical performance of flat buried approach slab and soil deformation. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): Numerical analyses on flexural performance of UHPC link slab- abutment backwall system in jointless bridges. Presented at: IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021.
- (2021): Numerical analyses of joint with steel endplates, headed stud anchors and concrete cross-beam in continuous steel-concrete composite girder bridges. Presented at: IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021.
- (2019): Pseudo-static Test on Mechanic Behavior of Pile with Pre-Hole filled by Foam in IABs. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2017): The optimal shapes of piles in integral abutment bridges. In: Journal of Traffic and Transportation Engineering (English Edition), v. 4, n. 6 (December 2017).
- (2019): Nonlinear Static Analysis by Finite Elements of a Fujian Hakka Tulou. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2011): Parametric and pushover analyses on integral abutment bridge. In: Engineering Structures, v. 33, n. 2 (February 2011).
- (2019): Probabilistic seismic response and uncertainty analysis of continuous bridges under near-fault ground motions. In: Frontiers of Structural and Civil Engineering, v. 13, n. 6 (October 2019).
- (2018): Parameter identification of degrading and pinched hysteretic systems using a modified Bouc–Wen model. In: Structure and Infrastructure Engineering, v. 14, n. 12 (December 2018).
- (2019): Probabilistic Seismic Response Analysis on Continuous Bridges Under Near-Fault Ground Motions. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 43, n. 3 ( 2019).
- (2019): On the form of the Musmeci's bridge over the Basento river. In: Engineering Structures, v. 191 (July 2019).
- (2016): Optimization Indexes to Identify the Optimal Design Solution of Shell-Supported Bridges. In: Journal of Bridge Engineering (ASCE), v. 21, n. 3 (March 2016).
- (2009): Nonlinear experimental response of non-conventional composite steel and concrete connection. In: Frontiers of Architecture and Civil Engineering in China, v. 3, n. 1 (January 2009).
- (2010): Optimized Design for Soil-Pile Interaction and Abutment Size of Integral Abutment Bridges. Presented at: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2007): Refurbishment of an arch bridge increasing its stiffness and reducing its weight. Presented at: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
- (2002): A new movable footbridge over Canale Burlamacca in Viareggio. Presented at: Footbridge 2002, Paris, 20-22.11.2002.
Structurae cooperates with
