Katrin Beyer 
- : Experimental and numerical evaluation of a U-shaped thin lightly reinforced concrete wall tested under cyclic loading. In: Bulletin of Earthquake Engineering.
- : Applying a 2D Variational Rigid Block Modeling Method to Rubble Stone Masonry Walls Considering Uncertainty in Material Properties. In: International Journal of Architectural Heritage.
- (2024): Collapse fragility analysis of historical masonry buildings considering in-plane and out-of-plane response of masonry walls.. In: Engineering Structures, v. 319 (November 2024).
- (2023): Automated image-based generation of finite element models for masonry buildings. In: Bulletin of Earthquake Engineering, v. 22, n. 7 (December 2023).
- (2023): Experimental investigation of the behaviour of injection anchors in rubble stone masonry. In: Engineering Structures, v. 292 (October 2023).
- (2019): Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 4 (10 April 2019).
- (2020): Comparison of crack segmentation using digital image correlation measurements and deep learning. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Decay of Torsional Stiffness in RC U-Shaped Walls. In: Journal of Structural Engineering (ASCE), v. 146, n. 9 (September 2020).
- (2020): Characterization of mortar–timber and timber–timber cyclic friction in timber floor connections of masonry buildings. In: Materials and Structures, v. 53, n. 3 (20 April 2020).
- (2020): Equivalent-Frame Modeling of Two Shaking Table Tests of Masonry Buildings Accounting for Their Out-Of-Plane Response. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2020): Experimental investigation of strength, stiffness and drift capacity of rubble stone masonry walls. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Extended Tension Chord Model for Boundary Elements of RC Walls Accounting for Anchorage Slip and Lap Splices Presence. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2018): A 2D typology generator for historical masonry elements. In: Construction and Building Materials, v. 184 (September 2018).
- (2016): Displacement-Based Seismic Design of Symmetric Single-Storey Wood-Frame Buildings with the Aid of N2 Method. In: Frontiers in Built Environment, v. 1 (January 2016).
- (2019): Experimental investigation on the deformation capacity of lap splices under cyclic loading. In: Bulletin of Earthquake Engineering, v. 17, n. 12 (September 2019).
- (2015): Development of a displacement-based design approach for modern mixed RC-URM wall structures. In: Earthquakes and Structures, v. 9, n. 4 (October 2015).
- (2015): Evaluation of seismic assessment procedures for determining deformation demands in RC wall buildings. In: Earthquakes and Structures, v. 9, n. 4 (October 2015).
- (2019): Experimental seismic performance of a half-scale stone masonry building aggregate. In: Bulletin of Earthquake Engineering, v. 18, n. 2 (May 2019).
- (2014): Capacity Design of Coupled RC Walls. In: Journal of Earthquake Engineering, v. 18, n. 5 ( 2014).
- (2017): Analytical model for the out-of-plane response of vertically spanning unreinforced masonry walls. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 15 (December 2017).
- (2017): Axially equilibrated displacement-based beam element for simulating the cyclic inelastic behaviour of RC members. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 9 (25 July 2017).
- (2015): Force-displacement response of in-plane-loaded URM walls with a dominating flexural mode. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 14 (November 2015).
- (2018): Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members. In: Materials and Structures, v. 51, n. 1 (February 2018).
- (2016): Behaviour of U-shaped RC walls under quasi-static cyclic diagonal loading. In: Engineering Structures, v. 106 (January 2016).
- (2017): Cyclic tensile-compressive tests on thin concrete boundary elements with a single layer of reinforcement prone to out-of-plane instability. In: Bulletin of Earthquake Engineering, v. 16, n. 2 (September 2017).
- (2017): Estimates for the stiffness, strength and drift capacity of stone masonry walls based on 123 quasi-static cyclic tests reported in the literature. In: Bulletin of Earthquake Engineering, v. 15, n. 12 (July 2017).
- (2014): Effective stiffness of reinforced concrete coupling beams. In: Engineering Structures, v. 76 (October 2014).
- (2019): Ductility reduction factor formulations for seismic design of RC wall and frame structures. In: Engineering Structures, v. 178 (January 2019).
- (2018): Analytical and empirical models for predicting the drift capacity of modern unreinforced masonry walls. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 10 (August 2018).
- (2018): effective stiffness of modern unreinforced masonry walls. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 8 (10 July 2018).
Structurae cooperates with
