Katrin Beyer 
- : Automated image-based generation of finite element models for masonry buildings. Dans: Bulletin of Earthquake Engineering.
- (2023): Experimental investigation of the behaviour of injection anchors in rubble stone masonry. Dans: Engineering Structures, v. 292 (octobre 2023).
- (2019): Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations. Dans: Earthquake Engineering and Structural Dynamics, v. 48, n. 4 (10 avril 2019).
- (2020): Comparison of crack segmentation using digital image correlation measurements and deep learning. Dans: Construction and Building Materials, v. 261 (novembre 2020).
- (2020): Decay of Torsional Stiffness in RC U-Shaped Walls. Dans: Journal of Structural Engineering (ASCE), v. 146, n. 9 (septembre 2020).
- (2020): Characterization of mortar–timber and timber–timber cyclic friction in timber floor connections of masonry buildings. Dans: Materials and Structures, v. 53, n. 3 (20 avril 2020).
- (2020): Equivalent-Frame Modeling of Two Shaking Table Tests of Masonry Buildings Accounting for Their Out-Of-Plane Response. Dans: Frontiers in Built Environment, v. 6 (janvier 2020).
- (2020): Experimental investigation of strength, stiffness and drift capacity of rubble stone masonry walls. Dans: Construction and Building Materials, v. 251 (août 2020).
- (2020): Extended Tension Chord Model for Boundary Elements of RC Walls Accounting for Anchorage Slip and Lap Splices Presence. Dans: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 janvier 2020).
- (2018): A 2D typology generator for historical masonry elements. Dans: Construction and Building Materials, v. 184 (septembre 2018).
- (2016): Displacement-Based Seismic Design of Symmetric Single-Storey Wood-Frame Buildings with the Aid of N2 Method. Dans: Frontiers in Built Environment, v. 1 (janvier 2016).
- (2019): Experimental investigation on the deformation capacity of lap splices under cyclic loading. Dans: Bulletin of Earthquake Engineering, v. 17, n. 12 (septembre 2019).
- (2015): Development of a displacement-based design approach for modern mixed RC-URM wall structures. Dans: Earthquakes and Structures, v. 9, n. 4 (octobre 2015).
- (2015): Evaluation of seismic assessment procedures for determining deformation demands in RC wall buildings. Dans: Earthquakes and Structures, v. 9, n. 4 (octobre 2015).
- (2019): Experimental seismic performance of a half-scale stone masonry building aggregate. Dans: Bulletin of Earthquake Engineering, v. 18, n. 2 (mai 2019).
- (2014): Capacity Design of Coupled RC Walls. Dans: Journal of Earthquake Engineering, v. 18, n. 5 ( 2014).
- (2017): Analytical model for the out-of-plane response of vertically spanning unreinforced masonry walls. Dans: Earthquake Engineering and Structural Dynamics, v. 46, n. 15 (décembre 2017).
- (2017): Axially equilibrated displacement-based beam element for simulating the cyclic inelastic behaviour of RC members. Dans: Earthquake Engineering and Structural Dynamics, v. 46, n. 9 (25 juillet 2017).
- (2016): Influence of boundary conditions on the out-of-plane response of brick masonry walls in buildings with RC slabs. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 8 (10 juillet 2016).
- (2015): Force-displacement response of in-plane-loaded URM walls with a dominating flexural mode. Dans: Earthquake Engineering and Structural Dynamics, v. 44, n. 14 (novembre 2015).
- (2018): Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members. Dans: Materials and Structures, v. 51, n. 1 (février 2018).
- (2016): Behaviour of U-shaped RC walls under quasi-static cyclic diagonal loading. Dans: Engineering Structures, v. 106 (janvier 2016).
- (2014): Influence of boundary conditions and size effect on the drift capacity of URM walls. Dans: Engineering Structures, v. 65 (avril 2014).
- (2017): Cyclic tensile-compressive tests on thin concrete boundary elements with a single layer of reinforcement prone to out-of-plane instability. Dans: Bulletin of Earthquake Engineering, v. 16, n. 2 (septembre 2017).
- (2016): Force–displacement response of in-plane loaded unreinforced brick masonry walls: the Critical Diagonal Crack model. Dans: Bulletin of Earthquake Engineering, v. 15, n. 5 (novembre 2016).
- (2017): Estimates for the stiffness, strength and drift capacity of stone masonry walls based on 123 quasi-static cyclic tests reported in the literature. Dans: Bulletin of Earthquake Engineering, v. 15, n. 12 (juillet 2017).
- (2014): Effective stiffness of reinforced concrete coupling beams. Dans: Engineering Structures, v. 76 (octobre 2014).
- (2019): Ductility reduction factor formulations for seismic design of RC wall and frame structures. Dans: Engineering Structures, v. 178 (janvier 2019).
- (2018): Analytical and empirical models for predicting the drift capacity of modern unreinforced masonry walls. Dans: Earthquake Engineering and Structural Dynamics, v. 47, n. 10 (août 2018).
- (2018): effective stiffness of modern unreinforced masonry walls. Dans: Earthquake Engineering and Structural Dynamics, v. 47, n. 8 (10 juillet 2018).
Structurae coopère avec
