Omar S. Baghabra Al-Amoudi
- (2023): Development of energy-efficient hollow concrete blocks using perlite, vermiculite, volcanic scoria, and expanded polystyrene. In: Construction and Building Materials, v. 371 (March 2023).
- (2022): Molecular-level investigation on the effect of surface moisture on the bonding behavior of cement-epoxy interface. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Energy Conservation and Thermal Insulation Performance of Concrete Block Walls Incorporating Expanded Polystyrene Panels: Experimental and Simulation Study. In: Journal of Architectural Engineering (ASCE), v. 28, n. 3 (September 2022).
- (2022): Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Effect of different treatments of crumb rubber on the durability characteristics of rubberized concrete. In: Construction and Building Materials, v. 318 (February 2022).
- (2016): Study of heavy fuel oil fly ash for use in concrete blocks and asphalt concrete mixes. In: Advances in Concrete Construction, v. 4, n. 2 (June 2016).
- (2022): Atomistic simulation of polymer-cement interactions: Progress and research challenges. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Development of sustainable concrete using recycled high-density polyethylene and crumb tires: Mechanical and thermal properties. In: Journal of Building Engineering, v. 45 (January 2022).
- (2020): Thermal Performance Evaluation of Walls with AAC Blocks, Insulating Plaster, and Reflective Coating. In: Journal of Energy Engineering, v. 146, n. 2 (April 2020).
- (2021): Influence of in-situ casting temperature and curing regime on the properties of blended cement concretes under hot climatic conditions. In: Construction and Building Materials, v. 272 (February 2021).
- (2021): Chloride diffusion models for Type I and fly ash cement concrete exposed to field and laboratory conditions. In: Marine Structures, v. 76 (March 2021).
- (2020): Stabilization and Solidification of Oil-Contaminated Sandy Soil Using Portland Cement and Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).
- (2020): Effect of insulation materials and cavity layout on heat transfer of concrete masonry hollow blocks. In: Construction and Building Materials, v. 254 (September 2020).
- (2018): Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration. In: Construction and Building Materials, v. 163 (February 2018).
- (2019): Influence of accelerated carbonation curing on the properties of self-compacting concrete mixtures containing different mineral fillers. In: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (October 2019).
- (2008): Compliance criteria for quality concrete. In: Construction and Building Materials, v. 22, n. 6 (June 2008).
- (2016): Effect of casting temperature on strength and density of plain and blended cement concretes prepared and cured under hot weather conditions. In: Construction and Building Materials, v. 112 (June 2016).
- (2017): Effect of placement temperature and curing method on plastic shrinkage of plain and pozzolanic cement concretes under hot weather. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Effects of carbonation pressure and duration on strength evolution of concrete subjected to accelerated carbonation curing. In: Construction and Building Materials, v. 136 (April 2017).
- (2004): Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. In: Construction and Building Materials, v. 18, n. 10 (December 2004).
- (2006): Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. In: Construction and Building Materials, v. 20, n. 9 (November 2006).
Structurae cooperates with
