0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Omar S. Baghabra Al-Amoudi

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Al-Tarbi, Saeed M. / Baghabra Al-Amoudi, Omar S. / Al-Osta, Mohammed A. / Al-Awsh, Waleed A. / Shameem, M. / Zami, Mohammad Sharif (2023): Development of energy-efficient hollow concrete blocks using perlite, vermiculite, volcanic scoria, and expanded polystyrene. In: Construction and Building Materials, v. 371 (März 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.130723

  2. Bahraq, Ashraf A. / Obot, I. B. / Al-Osta, Mohammed A. / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed (2022): Molecular-level investigation on the effect of surface moisture on the bonding behavior of cement-epoxy interface. In: Journal of Building Engineering, v. 61 (Dezember 2022).

    https://doi.org/10.1016/j.jobe.2022.105299

  3. Al-Naghi, Ahmed A. Alawi / Rahman, Muhammad Kalimur / Baghabra Al-Amoudi, Omar S. / Gondal, Mohammed A. (2022): Energy Conservation and Thermal Insulation Performance of Concrete Block Walls Incorporating Expanded Polystyrene Panels: Experimental and Simulation Study. In: Journal of Architectural Engineering (ASCE), v. 28, n. 3 (September 2022).

    https://doi.org/10.1061/(asce)ae.1943-5568.0000555

  4. Ahmad, Shamsad / Baghabra Al-Amoudi, Omar S. / Khan, Saad M. S. / Maslehuddin, Mohammed (2022): Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).

    https://doi.org/10.1016/j.cscm.2022.e01255

  5. Assaggaf, Rida Alwi / Al-Dulaijan, Salah Uthman / Maslehuddin, Mohammed / Baghabra Al-Amoudi, Omar S. / Ahmad, Shamsad / Ibrahim, Mohammed (2022): Effect of different treatments of crumb rubber on the durability characteristics of rubberized concrete. In: Construction and Building Materials, v. 318 (Februar 2022).

    https://doi.org/10.1016/j.conbuildmat.2021.126030

  6. Al-Osta, Mohammed A. / Baig, Mirza G. / Al-Malack, Muhammad H. / Baghabra Al-Amoudi, Omar S. (2016): Study of heavy fuel oil fly ash for use in concrete blocks and asphalt concrete mixes. In: Advances in Concrete Construction, v. 4, n. 2 (Juni 2016).

    https://doi.org/10.12989/acc.2016.4.2.123

  7. Bahraq, Ashraf A. / Al-Osta, Mohammed A. / Baghabra Al-Amoudi, Omar S. / Saleh, Tawfik A. / Obot, I. B. (2022): Atomistic simulation of polymer-cement interactions: Progress and research challenges. In: Construction and Building Materials, v. 327 (April 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.126881

  8. Al-Osta, Mohammed A. / Al-Tamimi, Ahmed S. / Al-Tarbi, Saeed M. / Baghabra Al-Amoudi, Omar S. / Al-Awsh, Waleed A. / Saleh, Tawfik A. (2022): Development of sustainable concrete using recycled high-density polyethylene and crumb tires: Mechanical and thermal properties. In: Journal of Building Engineering, v. 45 (Januar 2022).

    https://doi.org/10.1016/j.jobe.2021.103399

  9. Al-Naghi, Ahmed A. Alawi / Rahman, Muhammad Kalimur / Baghabra Al-Amoudi, Omar S. / Al-Dulaijan, Salah U. (2020): Thermal Performance Evaluation of Walls with AAC Blocks, Insulating Plaster, and Reflective Coating. In: Journal of Energy Engineering, v. 146, n. 2 (April 2020).

    https://doi.org/10.1061/(asce)ey.1943-7897.0000636

  10. Umar Khan, Muhammad / Nasir, Muhammad / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed (2021): Influence of in-situ casting temperature and curing regime on the properties of blended cement concretes under hot climatic conditions. In: Construction and Building Materials, v. 272 (Februar 2021).

    https://doi.org/10.1016/j.conbuildmat.2020.121865

  11. Al-Sodani, Khaled A. Alawi / Al-Zahrani, Mesfer Mohammad / Maslehuddin, Mohammed / Baghabra Al-Amoudi, Omar S. / Al-Dulaijan, Salah U. (2021): Chloride diffusion models for Type I and fly ash cement concrete exposed to field and laboratory conditions. In: Marine Structures, v. 76 (März 2021).

    https://doi.org/10.1016/j.marstruc.2020.102900

  12. Ahmad, Shamsad / Baghabra Al-Amoudi, Omar S. / Mustafa, Yassir M. H. / Maslehuddin, Mohammed / Al-Malack, Muhammad H. (2020): Stabilization and Solidification of Oil-Contaminated Sandy Soil Using Portland Cement and Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).

    https://doi.org/10.1061/(asce)mt.1943-5533.0003169

  13. Al-Tamimi, Ahmed S. / Baghabra Al-Amoudi, Omar S. / Al-Osta, Mohammed A. / Ali, Mohammed R. / Ahmad, Aftab (2020): Effect of insulation materials and cavity layout on heat transfer of concrete masonry hollow blocks. In: Construction and Building Materials, v. 254 (September 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119300

  14. Al-Sodani, Khaled A. Alawi / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed / Shameem, Mohammed (2018): Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration. In: Construction and Building Materials, v. 163 (Februar 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.12.097

  15. Ahmad, Shamsad / Assaggaf, Rida Alwi / Adekunle, Saheed Kolawole / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed / Ali, Syed Imran (2019): Influence of accelerated carbonation curing on the properties of self-compacting concrete mixtures containing different mineral fillers. In: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (Oktober 2019).

    https://doi.org/10.1080/19648189.2019.1649197

  16. Ahmad, Shamsad / Al-Kutti, Walid A. / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammad (2008): Compliance criteria for quality concrete. In: Construction and Building Materials, v. 22, n. 6 (Juni 2008).

    https://doi.org/10.1016/j.conbuildmat.2007.03.014

  17. Nasir, Muhammad / Baghabra Al-Amoudi, Omar S. / Al-Gahtani, Husain J. / Maslehuddin, Mohammed (2016): Effect of casting temperature on strength and density of plain and blended cement concretes prepared and cured under hot weather conditions. In: Construction and Building Materials, v. 112 (Juni 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.02.211

  18. Nasir, Muhammad / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed (2017): Effect of placement temperature and curing method on plastic shrinkage of plain and pozzolanic cement concretes under hot weather. In: Construction and Building Materials, v. 152 (Oktober 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.07.068

  19. Ahmad, Shamsad / Assaggaf, Rida Alwi / Maslehuddin, Mohammed / Baghabra Al-Amoudi, Omar S. / Adekunle, Saheed Kolawole / Ali, Syed Imran (2017): Effects of carbonation pressure and duration on strength evolution of concrete subjected to accelerated carbonation curing. In: Construction and Building Materials, v. 136 (April 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.01.069

  20. Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed / Abiola, Taofiq O. (2004): Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. In: Construction and Building Materials, v. 18, n. 10 (Dezember 2004).

    https://doi.org/10.1016/j.conbuildmat.2004.04.031

  21. Baghabra Al-Amoudi, Omar S. / Abiola, Taofiq O. / Maslehuddin, Mohammed (2006): Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. In: Construction and Building Materials, v. 20, n. 9 (November 2006).

    https://doi.org/10.1016/j.conbuildmat.2005.02.024

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine