Miguel Azenha 
- : New impulse-based test method for early-age elastic modulus measurement in cementitious materials. In: Case Studies in Construction Materials.
- (2024): A multidisciplinary engineering-based approach for tunnelling strengthening with a new fibre reinforced shotcrete technology. In: Tunnelling and Underground Space Technology, v. 147 (May 2024).
- (2024): Practical insights on standardised models for estimation of crack width due to imposed strains in edge-restrained reinforced concrete elements. In: Engineering Structures, v. 305 (April 2024).
- (2023): ‘‘ Influence of air entrainers on the properties of hydrated lime mortars’’. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Influence of conditioning of clay bricks over shear strength of brick masonry. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Influence of Temperature in the Early-age Elastic Modulus Evolution of Cement Pastes and Concrete. In: Journal of Advanced Concrete Technology, v. 21, n. 10 (27 October 2023).
- (2011): Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions. In: Cement and Concrete Research, v. 41, n. 8 (August 2011).
- (2020): Internal curing by superabsorbent polymers in alkali-activated slag. In: Cement and Concrete Research, v. 135 (September 2020).
- (2010): Measurement of concrete E-modulus evolution since casting: A novel method based on ambient vibration. In: Cement and Concrete Research, v. 40, n. 7 (July 2010).
- (2023): Hardening characterisation of a non-proprietary and more eco-friendly UHPC. In: Construction and Building Materials, v. 363 (January 2023).
- (2023): Integrating HBIM and Sustainability Certification: A Pilot Study Using GBC Historic Building Certification. In: International Journal of Architectural Heritage, v. 17, n. 9 (May 2023).
- (2021): Numerical simulations of derived URM-RC buildings: Assessment of strengthening interventions with RC. In: Journal of Building Engineering, v. 40 (August 2021).
- (2019): A proactive approach to the conservation of historic and cultural Heritage: the HeritageCare methodology. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): A multi-physics modelling based on coupled diffusion equations to simulate the carbonation process. In: Revista IBRACON de Estruturas e Materiais, v. 13, n. 5 ( 2020).
- (2020): Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): An innovative approach for temperature control of massive concrete structures at early ages based on post-cooling: Proof of concept. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): A new method based on equivalent surfaces for simulation of the post-cooling in concrete arch dams during construction. In: Engineering Structures, v. 209 (April 2020).
- (2020): Practice on creating a common reference concrete for Round Robin Testing programmes based on the experience from COST Action TU1404. In: Construction and Building Materials, v. 247 (June 2020).
- (2018): Numerical benchmark campaign of COST Action TU1404 – microstructural modelling. In: RILEM Technical Letters, v. 2 (April 2018).
- (2018): Pull-out behaviour of glass-fibre reinforced polymer perforated plate connectors embedded in concrete. Part II: Prediction of load carrying capacity. In: Construction and Building Materials, v. 169 (April 2018).
- (2018): Pull-out behaviour of Glass-Fibre Reinforced Polymer perforated plate connectors embedded in concrete. Part I: Experimental program. In: Construction and Building Materials, v. 162 (February 2018).
- (2019): Quantification of impact of lime on mechanical behaviour of lime cement blended mortars for bedding joints in masonry systems. In: Construction and Building Materials, v. 229 (December 2019).
- (2019): Hygro-mechanical modeling of restrained ring test: COST TU1404 benchmark. In: Construction and Building Materials, v. 229 (December 2019).
- (2019): Influence of the incorporation of phase change materials on temperature development in mortar at early ages: Experiments and numerical simulation. In: Construction and Building Materials, v. 225 (November 2019).
- (2019): Intervened URM buildings with RC elements: typological characterisation and associated challenges. In: Bulletin of Earthquake Engineering, v. 17, n. 9 (July 2019).
- (2012): Influence of shrinkage reducing admixtures on distinct SCC mix compositions. In: Construction and Building Materials, v. 35 (October 2012).
- (2016): Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials. In: Construction and Building Materials, v. 124 (October 2016).
- (2014): Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues. In: Journal of Advanced Concrete Technology, v. 12, n. 8 ( 2014).
- (2012): Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique. In: Materials and Structures, v. 45, n. 1-2 (January 2012).
- (2017): A formulation to reduce mesh dependency in FE analyses of RC structures under imposed deformations. In: Engineering Structures, v. 132 (February 2017).
Structurae cooperates with
