Miguel Azenha 
- (2024): Experimental analysis of carbonation, humidity fields and the evolution of elastic modulus in air lime mortar. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Continuous Monitoring of Elastic Modulus of Mortars Using a Single-Board Computer and Cost-Effective Components. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2012): E-modulus evolution and its relation to solids formation of pastes from commercial cements. In: Cement and Concrete Research, v. 42, n. 7 (Juli 2012).
- (2023): Hardening characterisation of a non-proprietary and more eco-friendly UHPC. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2021): Early age cracking risk in a massive concrete foundation slab: Comparison of analytical and numerical prediction models with on-site measurements. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Experiences and analysis of the construction process of mass foundation slabs aimed at reducing the risk of early age cracks. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Experimental analysis of lime putty and pozzolan-based mortar for interventions in archaeological sites. In: Materials and Structures, v. 54, n. 4 (2 Juli 2021).
- (2023): Automatic Detection of Surface Damage in Round Brick Chimneys by Finite Plane Modelling from Terrestrial Laser Scanning Point Clouds. Case Study of Bragança Dukes’ Palace, Guimarães, Portugal. In: International Journal of Architectural Heritage, v. 17, n. 2 (Mai 2023).
- (2022): Development and Demonstration of an HBIM Framework for the Preventive Conservation of Cultural Heritage. In: International Journal of Architectural Heritage, v. 16, n. 10 (Juni 2022).
- (2021): Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2014): Continuous monitoring of sand–cement stiffness starting from layer compaction with a resonant frequency-based method: Issues on mould geometry and sampling. In: Soils and Foundations, v. 54, n. 1 (Februar 2014).
- (2013): Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour. In: Composite Structures, v. 105 (November 2013).
- (2013): Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests. In: Composite Structures, v. 105 (November 2013).
- (2020): Experiences on early age cracking of wall-on-slab concrete structures. In: Structures, v. 27 (Oktober 2020).
- (2020): Analytical assessment of restraint forces and crack widths in end-restrained building slabs. In: Engineering Structures, v. 224 (Dezember 2020).
- (2020): Finite element based micro modelling of masonry walls subjected to fire exposure: Framework validation and structural implications. In: Engineering Structures, v. 213 (Juni 2020).
- (2020): 3D numerical simulation of the cracking behaviour of a RC one-way slab under the combined effect of thermal, shrinkage and external loads. In: Engineering Structures, v. 212 (Juni 2020).
- (2020): Displacement-based seismic performance evaluation and vulnerability assessment of buildings: The N2 method revisited. In: Structures, v. 24 (April 2020).
- (2018): COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage. In: Construction and Building Materials, v. 174 (Juni 2018).
- (2019): Hygro-mechanical modeling of restrained ring test: COST TU1404 benchmark. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2015): Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems. In: Construction and Building Materials, v. 89 (August 2015).
- (2017): Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2017): Analysis of the effect of shoring on the behaviour of reinforced concrete slabs. In: Construction and Building Materials, v. 143 (Juli 2017).
- (2017): Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar. In: Construction and Building Materials, v. 148 (September 2017).
- (2014): Comparison Between Different Experimental Techniques for Stiffness Monitoring of Cement Pastes. In: Journal of Advanced Concrete Technology, v. 12, n. 2 ( 2014).
- (2017): A formulation to reduce mesh dependency in FE analyses of RC structures under imposed deformations. In: Engineering Structures, v. 132 (Februar 2017).
- (2014): Application of air cooled pipes for reduction of early age cracking risk in a massive RC wall. In: Engineering Structures, v. -1 (März 2014).
- (2014): Early-age behaviour of the concrete surrounding a turbine spiral case: Monitoring and thermo-mechanical modelling. In: Engineering Structures, v. 81 (Dezember 2014).
- (2018): Energy benefits of cement-based plaster containing hybrid phase-change material. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 171, n. 3 (Juni 2018).
- (2018): Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages. In: Construction and Building Materials, v. 193 (Dezember 2018).
Structurae kooperiert mit
