Mingzhe An 
- (2025): Effect mechanisms of prolonged dry-hot exposure on C-S-H gel properties in cementitious materials. In: Construction and Building Materials, v. 462 (February 2025).
- (2025): Research on the 3D printing process and filament shape of cementitious materials in low gravity. In: Construction and Building Materials, v. 458 (January 2025).
- (2025): Optimizing printing and rheological parameters for 3D printing with cementitious materials. In: Automation in Construction, v. 169 (January 2025).
- (2024): Time-varying moisture characteristics and C-S-H gel properties of concrete in dry and hot environments. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Parameter impact on 3D concrete printing from single to multi-layer stacking. In: Automation in Construction, v. 164 (August 2024).
- (2024): Numerical simulation of 3D concrete printing derived from printer head and printing process. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Preparation of geopolymer concrete with Bayer red mud and its reaction mechanism. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Influence of vibrating compaction time on the strength and microstructure of ultra-high performance concrete. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Fatigue behavior of reinforced UHPC-NC composite beams. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Degradation Law and Prediction Model of Elastic Modulus of High-Performance Concrete under Thermal Cycling. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2022): Influence of steel slag fineness on the hydration of cement-steel slag composite pastes. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Occurrence and leaching behaviors of heavy-metal elements in metallurgical slags. In: Construction and Building Materials, v. 330 (May 2022).
- (2021): Expansion strain model and damage risk control for cement-based materials with low water–binder ratios under rehydration. In: Construction and Building Materials, v. 287 (June 2021).
- (2021): Rehydration Model for Ultrahigh-Performance Concrete Matrix. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (January 2021).
- (2020): Flexural Performance of Composite Prestressed UHPC-NC T-Girders. In: Journal of Bridge Engineering (ASCE), v. 25, n. 9 (September 2020).
- (2020): Effect of thermal cycling on the properties of high-performance concrete: Microstructure and mechanism. In: Construction and Building Materials, v. 243 (May 2020).
- (2018): Experimental and cellular-automata-based analysis of chloride ion diffusion in reactive powder concrete subjected to freeze–thaw cycling. In: Construction and Building Materials, v. 172 (May 2018).
- (2019): Effect of environmental thermal fatigue on concrete performance based on mesostructural and microstructural analyses. In: Construction and Building Materials, v. 207 (May 2019).
- (2016): Impacts of various factors on the rehydration of cement-based materials with a low water–binder ratio using mathematical models. In: Construction and Building Materials, v. 125 (October 2016).
- (2019): Damage mechanisms of ultra-high-performance concrete under freeze–thaw cycling in salt solution considering the effect of rehydration. In: Construction and Building Materials, v. 198 (February 2019).
- (2018): Shear Capacity of T-Section Girders Made of Reactive Powder Concrete. In: Journal of Bridge Engineering (ASCE), v. 23, n. 7 (July 2018).
- (2018): The Modeling Research on the Early-Age Shrinkage of UHPFRC in Different Curing Conditions. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Effect of Curing Conditions on the Shrinkage of Ultra High-Performance Fiber-Reinforced Concrete. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
