Engineering Structures - juin 2016

Publié:	juin 2016

Auteur(s)	Titre	Page(s)
Quezada, Juan-Carlos / Vincens, Eric / Mouterde, Rémy / Morel, Jean-Claude	3D failure of a scale-down dry stone retaining wall: A DEM modelling	506-517
Li, Zhong-Xian / Gao, Ying / Zhao, Qiuhong	A 3D flexure–shear fiber element for modeling the seismic behavior of reinforced concrete columns	372-383
Iraola, B. / Cabrero, J. M.	An algorithm to model wood accounting for different tension and compression elastic and failure behaviors	332-343
Zhang, Guodong / Alberdi, Ryan / Khandelwal, Kapil	Analysis of three-dimensional curved beams using isogeometric approach	560-574
Carbonari, Sandro / Morici, Michele / Dezi, Francesca / Leoni, Graziano	Analytical evaluation of impedances and kinematic response of inclined piles	384-396
Deng, Yaohua / Phares, Brent M.	Automated bridge load rating determination utilizing strain response due to ambient traffic trucks	101-117
Kwan, A. K. H. / Dong, C. X. / Ho, J. C. M.	Axial and lateral stress–strain model for circular concrete-filled steel tubes with external steel confinement	528-541
Maranan, G. B. / Manalo, A. C. / Benmokrane, B. / Karunasena, W. / Mendis, P.	Behavior of concentrically loaded geopolymer-concrete circular columns reinforced longitudinally and transversely with GFRP bars	422-436
Lin, Zhaofei / Liu, Yuqing / Roeder, Charles W.	Behavior of stud connections between concrete slabs and steel girders under transverse bending moment	130-144
Fernando, D. / Frangi, A. / Kobel, P.	Behaviour of basalt fibre reinforced polymer strengthened timber laminates under tensile loading	437-456
Ramaglia, G. / Lignola, G. P. / Prota, A.	Collapse analysis of slender masonry barrel vaults	86-100
Speicher, Matthew S. / Harris, John L.	Collapse Prevention seismic performance assessment of new eccentrically braced frames using ASCE 41	344-357
Bastien-Masse, Maléna / Brühwiler, Eugen	Composite model for predicting the punching resistance of R-UHPFRC–RC composite slabs	603-616
Tiberti, Simone / Acito, Maurizio / Milani, Gabriele	Comprehensive FE numerical insight into Finale Emilia Castle behavior under 2012 Emilia Romagna seismic sequence: Damage causes and seismic vulnerability mitigation hypothesis	397-421
Mousavi, Seyed Amin / Zahrai, Seyed Mehdi	Contribution of pre-slacked cable braces to dynamic stability of non-ductile frames; an analytical study	305-320
Chen, Linpeng / Ozbakkaloglu, Togay	Corner strengthening of square and rectangular concrete-filled FRP tubes	486-495
Yan, Jia-Bao / Qian, Xudong / Liew, J. Y. Richard / Zong, Liang	Damage plasticity based numerical analysis on steel–concrete–steel sandwich shells used in the Arctic offshore structure	542-559
Xie, X. D. / Wang, Q.	Design of a piezoelectric harvester fixed under the roof of a high-rise building	1-9
An, Qi / Ren, Qingying / Liu, Hongbo / Yan, Xiangyu / Chen, Zhihua	Dynamic performance characteristics of an innovative Cable Supported Beam Structure–Concrete Slab Composite Floor System under human-induced loads	40-57
Shuraim, Ahmed B. / El-Sayed, Ahmed K.	Experimental verification of strut and tie model for HSC deep beams without shear reinforcement	71-85
Ivanco, Vladimir / Kmet, Stanislav / Fedorko, Gabriel	Finite element simulation of creep of spiral strands	220-238
Chen, Xi / Liu, Yi	A finite element study of the effect of vertical loading on the in-plane behavior of concrete masonry infills bounded by steel frames	118-129
D'Amico, B. / Zhang, H. / Kermani, A.	A finite-difference formulation of elastic rod for the design of actively bent structures	518-527
Seon Park, Hyo / Lee, Eunseok / Woon Choi, Se / Oh, Byung Kwan / Cho, Tongjun / Kim, Yousok	Genetic-algorithm-based minimum weight design of an outrigger system for high-rise buildings	496-505
Motamedi, Mehrtash / Ventura, Carlos E.	Inelastic response of steel roof deck diaphragms with nailed and welded connections	10-25
Ma, Yafei / Xu, Fuyou / Wang, Lei / Zhang, Jianren / Zhang, Xuhui	Influence of corrosion-induced cracking on structural behavior of reinforced concrete arch ribs	184-194
Hengl, H. L. / Füssl, J.	The influence of superelevated profiles of paving block structures on their load-bearing behavior	195-203
Datsiou, Kyriaki Corinna / Overend, Mauro	The mechanical response of cold bent monolithic glass plates during the bending process	575-590
Do, Trung Q. / van de Lindt, John W. / Cox, Daniel T.	Performance-based design methodology for inundated elevated coastal structures subjected to wave load	250-262
Muntasir Billah, A. H. M. / Shahria Alam, M.	Plastic hinge length of shape memory alloy (SMA) reinforced concrete bridge pier	321-331
Dimitrov, N.	Probabilistic model for multi-axial dynamic load combinations for wind turbines	239-249
Almeida, André F. O. / Inácio, Micael M. G. / Lúcio, Válter J. G. / Ramos, António Pinho	Punching behaviour of RC flat slabs under reversed horizontal cyclic loading	204-219
Yan, Jia-Bao / Liew, J. Y. Richard / Zhang, Min-Hong / Li, Zhong-Xian	Punching shear resistance of steel–concrete–steel sandwich composite shell structure	470-485
Wang, Chuanlin / Forth, John P. / Nikitas, Nikolaos / Sarhosis, Vasilis	Retrofitting of masonry walls by using a mortar joint technique; experiments and numerical validation	58-70
Wang, Wei / Fang, Cheng / Chen, Yiyi / Wang, Mingxing	Seismic performance of steel H-beam to SHS-column cast modular panel zone joints	145-160
Karamlou, Aman / Bocchini, Paolo	Sequencing algorithm with multiple-input genetic operators: Application to disaster resilience	591-602
Olmati, Pierluigi / Petrini, Francesco / Vamvatsikos, Dimitrios / Gantes, Charis	Simplified fragility-based risk analysis for impulse governed blast loading scenarios	457-469
Qin, Xi / Wang, Wei / Chen, Yiyi / Bao, Yihai	A special reinforcing technique to improve resistance of beam-to-tubular column connections for progressive collapse prevention	26-39
Shahverdi, Moslem / Czaderski, Christoph / Annen, Philipp / Motavalli, Masoud	Strengthening of RC beams by iron-based shape memory alloy bars embedded in a shotcrete layer	263-273
Couceiro, I. / París, J. / Martínez, S. / Colominas, I. / Navarrina, F. / Casteleiro, M.	Structural optimization of lattice steel transmission towers	274-286
Bompa, D. V. / Elghazouli, A. Y.	Structural performance of RC flat slabs connected to steel columns with shear heads	161-183
Stylianidis, P. M. / Nethercot, D. A. / Izzuddin, B. A. / Elghazouli, A. Y.	Study of the mechanics of progressive collapse with simplified beam models	287-304
Guo, Tong / Chen, Zheheng / Liu, Tie / Han, Dazhang	Time-dependent reliability of strengthened PSC box-girder bridge using phased and incremental static analyses	358-371

Auteur(s)

Titre

Page(s)

Quezada, Juan-Carlos / Vincens, Eric / Mouterde, Rémy / Morel, Jean-Claude

3D failure of a scale-down dry stone retaining wall: A DEM modelling

506-517

Li, Zhong-Xian / Gao, Ying / Zhao, Qiuhong

A 3D flexure–shear fiber element for modeling the seismic behavior of reinforced concrete columns

372-383

Iraola, B. / Cabrero, J. M.

An algorithm to model wood accounting for different tension and compression elastic and failure behaviors

332-343

Zhang, Guodong / Alberdi, Ryan / Khandelwal, Kapil

Analysis of three-dimensional curved beams using isogeometric approach

560-574

Carbonari, Sandro / Morici, Michele / Dezi, Francesca / Leoni, Graziano

Analytical evaluation of impedances and kinematic response of inclined piles

384-396

Deng, Yaohua / Phares, Brent M.

Automated bridge load rating determination utilizing strain response due to ambient traffic trucks

101-117

Kwan, A. K. H. / Dong, C. X. / Ho, J. C. M.

Axial and lateral stress–strain model for circular concrete-filled steel tubes with external steel confinement

528-541

Maranan, G. B. / Manalo, A. C. / Benmokrane, B. / Karunasena, W. / Mendis, P.

Behavior of concentrically loaded geopolymer-concrete circular columns reinforced longitudinally and transversely with GFRP bars

422-436

Lin, Zhaofei / Liu, Yuqing / Roeder, Charles W.

Behavior of stud connections between concrete slabs and steel girders under transverse bending moment

130-144

Fernando, D. / Frangi, A. / Kobel, P.

Behaviour of basalt fibre reinforced polymer strengthened timber laminates under tensile loading

437-456

Ramaglia, G. / Lignola, G. P. / Prota, A.

Collapse analysis of slender masonry barrel vaults

86-100

Speicher, Matthew S. / Harris, John L.

Collapse Prevention seismic performance assessment of new eccentrically braced frames using ASCE 41

344-357

Bastien-Masse, Maléna / Brühwiler, Eugen

Composite model for predicting the punching resistance of R-UHPFRC–RC composite slabs

603-616

Tiberti, Simone / Acito, Maurizio / Milani, Gabriele

Comprehensive FE numerical insight into Finale Emilia Castle behavior under 2012 Emilia Romagna seismic sequence: Damage causes and seismic vulnerability mitigation hypothesis

397-421

Mousavi, Seyed Amin / Zahrai, Seyed Mehdi

Contribution of pre-slacked cable braces to dynamic stability of non-ductile frames; an analytical study

305-320

Chen, Linpeng / Ozbakkaloglu, Togay

Corner strengthening of square and rectangular concrete-filled FRP tubes

486-495

Yan, Jia-Bao / Qian, Xudong / Liew, J. Y. Richard / Zong, Liang

Damage plasticity based numerical analysis on steel–concrete–steel sandwich shells used in the Arctic offshore structure

542-559

Xie, X. D. / Wang, Q.

Design of a piezoelectric harvester fixed under the roof of a high-rise building

1-9

An, Qi / Ren, Qingying / Liu, Hongbo / Yan, Xiangyu / Chen, Zhihua

Dynamic performance characteristics of an innovative Cable Supported Beam Structure–Concrete Slab Composite Floor System under human-induced loads

40-57

Shuraim, Ahmed B. / El-Sayed, Ahmed K.

Experimental verification of strut and tie model for HSC deep beams without shear reinforcement

71-85

Ivanco, Vladimir / Kmet, Stanislav / Fedorko, Gabriel

Finite element simulation of creep of spiral strands

220-238

Chen, Xi / Liu, Yi

A finite element study of the effect of vertical loading on the in-plane behavior of concrete masonry infills bounded by steel frames

118-129

D'Amico, B. / Zhang, H. / Kermani, A.

A finite-difference formulation of elastic rod for the design of actively bent structures

518-527

Seon Park, Hyo / Lee, Eunseok / Woon Choi, Se / Oh, Byung Kwan / Cho, Tongjun / Kim, Yousok

Genetic-algorithm-based minimum weight design of an outrigger system for high-rise buildings

496-505

Motamedi, Mehrtash / Ventura, Carlos E.

Inelastic response of steel roof deck diaphragms with nailed and welded connections

10-25

Ma, Yafei / Xu, Fuyou / Wang, Lei / Zhang, Jianren / Zhang, Xuhui

Influence of corrosion-induced cracking on structural behavior of reinforced concrete arch ribs

184-194

Hengl, H. L. / Füssl, J.

The influence of superelevated profiles of paving block structures on their load-bearing behavior

195-203

Datsiou, Kyriaki Corinna / Overend, Mauro

The mechanical response of cold bent monolithic glass plates during the bending process

575-590

Do, Trung Q. / van de Lindt, John W. / Cox, Daniel T.

Performance-based design methodology for inundated elevated coastal structures subjected to wave load

250-262

Muntasir Billah, A. H. M. / Shahria Alam, M.

Plastic hinge length of shape memory alloy (SMA) reinforced concrete bridge pier

321-331

Dimitrov, N.

Probabilistic model for multi-axial dynamic load combinations for wind turbines

239-249

Almeida, André F. O. / Inácio, Micael M. G. / Lúcio, Válter J. G. / Ramos, António Pinho

Punching behaviour of RC flat slabs under reversed horizontal cyclic loading

204-219

Yan, Jia-Bao / Liew, J. Y. Richard / Zhang, Min-Hong / Li, Zhong-Xian

Punching shear resistance of steel–concrete–steel sandwich composite shell structure

470-485

Wang, Chuanlin / Forth, John P. / Nikitas, Nikolaos / Sarhosis, Vasilis

Retrofitting of masonry walls by using a mortar joint technique; experiments and numerical validation

58-70

Wang, Wei / Fang, Cheng / Chen, Yiyi / Wang, Mingxing

Seismic performance of steel H-beam to SHS-column cast modular panel zone joints

145-160

Karamlou, Aman / Bocchini, Paolo

Sequencing algorithm with multiple-input genetic operators: Application to disaster resilience

591-602

Olmati, Pierluigi / Petrini, Francesco / Vamvatsikos, Dimitrios / Gantes, Charis

Simplified fragility-based risk analysis for impulse governed blast loading scenarios

457-469

Qin, Xi / Wang, Wei / Chen, Yiyi / Bao, Yihai

A special reinforcing technique to improve resistance of beam-to-tubular column connections for progressive collapse prevention

26-39

Shahverdi, Moslem / Czaderski, Christoph / Annen, Philipp / Motavalli, Masoud

Strengthening of RC beams by iron-based shape memory alloy bars embedded in a shotcrete layer

263-273

Couceiro, I. / París, J. / Martínez, S. / Colominas, I. / Navarrina, F. / Casteleiro, M.

Structural optimization of lattice steel transmission towers

274-286

Bompa, D. V. / Elghazouli, A. Y.

Structural performance of RC flat slabs connected to steel columns with shear heads

161-183

Stylianidis, P. M. / Nethercot, D. A. / Izzuddin, B. A. / Elghazouli, A. Y.

Study of the mechanics of progressive collapse with simplified beam models

287-304

Guo, Tong / Chen, Zheheng / Liu, Tie / Han, Dazhang

Time-dependent reliability of strengthened PSC box-girder bridge using phased and incremental static analyses

358-371

Publicité

Engineering Structures - juin 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - juin 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.