Construction and Building Materials - août 2024

Publié:	août 2024

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Liu, Junli / Haikola, Pirjo / Fox, Kate / Tran, Phuong	3D printing of cementitious composites with seashell particles: Mechanical and microstructural analysis	136939
Orozco, Carlos A. / Duque-Redondo, Eduardo / Aretxabaleta, Xabier M. / Manzano, Hegoi / Monteiro, Paulo J.M.	APTES/Calcium silica hydrate nano-hybrid composites with enhanced mechanical properties	137087
Wang, Xiaoming / Xiao, Yuanjie / Li, Wenqi / Chen, Yuliang / Meng, Fanwei	Assessing particle crushing mechanism and optimizing design for recycled aggregates in road bases via a novel particle crushing DEM method	137046
Azevedo, Adriano G.S. / Savastano, Holmer	Assessment of carbonation as a complementary strategy to increase the durability of Magnesium Oxysulfate (MOS)-based fiber cement boards	137086
Hou, Sailong / Li, Kai / Hu, Xiang / Shi, Caijun	Assessment on the heterogeneity and roughness of fracture surface of steel fiber reinforced concrete	137025
Wang, Hai-Tao / Liu, Sai-Sai / Shi, Jia-Wei / Xu, Guo-Wen / Chen, Min-Sheng / Bian, Zhi-Ning	Bonded and unbonded strengthening of RC beams with the prestressed CFRP plate system: An experimental study	137118
Zhu, Zhipeng / Song, Xiaoxue / Chi, Xiang / Zhao, Jingyao / Zhou, Qiaofang / Sanchez‑Ferrer, Antoni / Tu, Dengyun / Cheng, Wanli	Characterization of hygrothermal, gas pressure and stress characteristics for poplar wood during unilateral surface densification	137099
Moumni, Boutaina / Oulmekki, Abdallah / Kizinievič, Olga / Kizinievič, Viktor / Eliche-Quesada, Dolores / Charroud, Mohammed / El Moudden, Noureddine / Benmoussa, Hayat	Clay influence on lightweight brick’s properties: Investigating the impact of waste’s nature and amount as secondary variables	136844
Zeng, Lan / Liang, Xuqi / Lu, Huaqiang / Liu, Shi / Yuan, Hong / Mohamed, Hazem Samih	Compressive behavior of seawater and sea sand concrete-filled FRP-steel composite multi-tube hollow columns	137133
Zhang, Zhihui / Niu, Gang / Yang, Xiaojia / Chen, Haoxiu / Anijdan, S.H. Mousavi / Zhang, Pengcheng / Yu, Xinpan / Gong, Na / Liu, Hongfei / Mao, Xinping / Wu, Huibin	Corrosion resistance behavior of enhanced passivation Cr-modified rebars and their service life prediction based on Monte Carlo simulation	137130
Xia, Xing / Guo, Jinjun / Zhang, Peng / Yang, Lin / Zhu, Duo	A coupled hygro-thermal model for the performance evolution of mineral admixture concrete subjected to variable environmental conditions	137084
Cho, Hyunmuk / Jung, Jongwon / Yang, Beomjoo / Hong, Won-Taek	Curing process monitoring of cementitious grout using time domain reflectometry (TDR) system	136729
Zeng, Lu / Wang, Wenting / Xiong, Shuangyan / Wang, Shuping / Zhang, Jianxin	Dehydration behaviors and properties of anhydrite II prepared by phosphogypsum with low-temperature calcination	136936
Yu, Xiaotao / Yuan, Yong / Liang, Chen / Wang, Xiaoyu / Wang, Siqi / Deng, Zhuowei	Development and characterization of high friction polyurethane bearings for bridge engineering applications	136846
Li, Mengyao / Zhang, Yuhao / Liu, Songyu / He, Huan / Wang, Zhengcheng / Zhang, Xiang	Dynamic properties of alkali residue-based foamed concrete under cyclic load	137060
Ali, Amr E. / Serag Faried, A. / Osman, Khaled M.	Effect of elevated temperature on properties of concrete containing different types of nano-materials	136988
Yao, Yujin / Zhou, Xiaowei / Li, Guanyu / Chen, Huaxin / Li, Nan / Wu, Yongchang	Effect of multiple environmental conditions on the formation process and adhesion strength of ice on asphalt binder surface	137065
Li, Shuai / Tan, Yiqiu / Fu, Yongkang / Li, Jilu / Ye, Wanli / Li, Guannan / Liu, Xinye	Effect of phase change materials on thermophysical properties of asphalt mixtures and snow melting performance	136968
Zhang, Jianwei / Chen, Meizhu / Wan, Lu / Wu, Shaopeng / Zhao, Yuechao / Chen, Dongyu / Fan, Yansong	Effect of recycled agricultural waste on fume emission and physicochemical properties of crumb rubber modified asphalt	137093
Gu, Yu-Cun / Khayat, Kamal H.	Effect of superabsorbent polymer on 3D printing characteristics as rheology-modified agent	137140
Sengupta, Jayashree / Dhang, Nirjhar / Deb, Arghya	Efficient mix design of one-part alkali-activated concrete using packing density method and its optimization through Taguchi-GRA	136869
Yin, Tianxiao / Wang, Zhiqiang / Sun, Chuang / Zhou, Wenzhe / Reynolds, Thomas	Embedment behaviour of hybrid cross-laminated timber (HCLT) made of fast-growing Chinese fir and OSB	137117
Diao, Zhaoxu / Gan, Xingyu / Xu, Jun / Jin, Yuan / Zhang, Haiming / Li, Laibo / Lu, Lingchao / Cheng, Xin	Enhancement of mechanical properties, durability and service life of low carbon cement paste with super low w/c ratio by incorporating carbon fiber	137035
Zhang, Mo / Qiu, Xinxin / Zhang, Ruochen	Enhancing alkali resistance of recycled GFRP fibers and mechanical performances of cement mortars with microbial induced carbonate precipitation	137091
Nian, Tengfei / Wang, Maomin / Ge, Jinguo / Guo, Rui / Li, Piyi / Song, Jiaqi	Enhancing low-temperature crack resistance: A method for establishing meso-models and evaluating steel fiber-reinforced hot recycled asphalt mixtures	137026
Oyelere, Abeeb / Wu, Shenghua / Hsiao, Kuang-Ting / Kang, Min-Wook / Dizbay-Onat, Melike / Cleary, John / Venkiteshwaran, Kaushik / Wang, Jinhui / Bao, Yi	Evaluation of cracking susceptibility of asphalt binders modified with recycled high-density polyethylene and polypropylene microplastics	136811
Diao, Yu / Hu, Qingsong / Huang, Jianyou / Guo, Xin / Li, Pengjin / Liu, Xuanqi / Bai, Jitao	Evaluation of mechanical properties and potential environmental applications of biomimetic mineralized composites	136976
Guo, Zhaoheng / Ni, Yingying / Xu, Zhenhai / Chen, Gaofeng / Wu, Huixia / Liu, Cheng / Gao, Jianming / Du, Hongjian	Evolution of in-situ pore structure of nanosilica modified high-volume blast furnace slag cementitious materials under sulfate attack	136937
Zhang, Chao / Liu, Shiming / Xia, Yangyang / Wang, Cuixia / Qiao, Shi / Fang, Hongyuan	Experimental and numerical investigations of an auxetic support structure used for local repair of buried pipelines	137127
Bravo, Tomas P. / Gattas, Joseph M. / Bravo, Felipe / Astroza, Rodrigo / Maluk, Cristián	Experimental assessment of modal properties of hybrid CFRP-timber panels	137075
Chang, Hong / Gan, Zhengheng / Jiang, Sheng / Li, Yunjie / Jiang, Haozhi / Zhao, Songying	Experimental study of phase change energy pile based on Gum Arabic and Polyethylene Glycol 600 under multiple Thermal-Cold cycles	137109
Du, Changbo / Li, Dongze / Yi, Fu / Wang, Meng / Niu, Ben	Experimental study on fiber-reinforced cement tailings sand-based grouting material preparation and factors influencing the grouting effect	137104
Zhao, Lei / Jiang, Dianyou / Zhao, Guotang / Sun, Jianxun / Yang, Guotao	Experimental study on the dynamic characteristics of bi-block ballastless track under the combined action of vehicle load and temperature gradient	137107
Zhu, Xingyu / Zhang, Zhiqiang / Zheng, Chuantian / Wei, Jia	Experimental study on the mechanical properties and creep-related behaviors of peridotite under gradient of loading	136952
Fan, Yulou / Yu, Yunhong / Shi, Chenguang / Wu, You / Huang, Siqi / Zhou, Yixin / Wang, Houzhi / Yang, Jun / Huang, Wei	Failure modes of asphalt pavement with top-down cracks based on measured aging gradients in field cores	137050
Ming, Jing / Zhou, xiaocheng / Shi, Jinjie	Feasibility of using 2304 duplex stainless steel in seawater-mixed concrete pore solutions: A preliminary passivation consideration	137037
Cunha, Sandra / Sarcinella, Antonella / Reis, Nuno / Aguiar, José / Frigione, Mariaenrica	High temperature performance of cement mortars with incorporation of PEG-based form-stable Phase Change Materials	136946
Li, Jiye / Qu, Yandong / Li, Jiangchuan / Wang, Lei / Peng, Yongpeng / Chang, Jun	Hydration mechanism and kinetic response of a C4A3$-C2S binary system	137067
Wang, Xuhui / Zhang, Tongsheng / Chen, Peixin / Xu, Guolin / Guo, Yiqun / Wei, Jiangxiong / Yu, Qijun	Hydration mechanism and microstructure evolution of recycled brick powder blended cement toward low-carbon and cleaner production	137097
Jiang, Guanzhao / Zhao, Liangliang / Li, Hong / Wu, Shunchuan / Cheng, Haiyong / Sun, Wei / Wu, Aixiang / Chen, Chong	Immobilization of phosphorus and fluorine from whole phosphogypsum-based cemented backfill material with self-cementing properties	137072
Maglad, Ahmed M. / Othuman Mydin, Md Azree / Datta, Shuvo Dip / Abbood, Imad Shakir / Tayeh, Bassam A.	Impact of anionic surfactant-based foaming agents on the properties of lightweight foamed concrete	137119
Ou, Xiaoduo / Ye, Gengchang / Jiang, Jie / Gong, Jian / He, Zujie	Improving electrical and mechanical properties of cement composites by combined addition of carbon black and carbon nanotubes and steel fibers	136931
Paula Junior, Adilson Campos / Teixeira, Elisabete / Mateus, Ricardo	Improving the mechanical, thermal and durability properties of compressed earth blocks by incorporating industrial waste and by-products: A systematic literature review	137063
Zhang, Jiazheng / Mao, Yanpeng / Wei, Guangshuo / Jin, Yang / Wang, Xujiang / Li, Jingwei / Pang, Dongjie / Wang, Wenlong	Improving the performance of iron-rich calcium sulfoaluminate cement from municipal solid waste incineration fly ash through diverse pretreatment approaches	136929
Dang, Juntao / Hao, Lukai / Wang, Tingyan / Xiao, Jianzhuang / Zhao, Hang	Improving thermal conductivity and drying shrinkage of foamed concrete with artificial ceramsite from excavation soil and sewage sludge	137010
Nakase, Kota / Hashimoto, Katsufumi / Sugiyama, Takafumi / Kono, Katsuya	Influence of print paths on mechanical properties and fracture propagation of 3D printed concrete	137019
Deng, Ziming	Influence of recycled rubber and glass aggregates on magnesium sulfate resistance of geopolymers: Physio-mechanical properties and mechanisms	137134
Zhou, Shengxiong / Yan, Jiqiang / Li, Linyu / Li, Siqi / Wu, Shenmo / Yan, Chuanqi / Ai, Changfa	Investigating the influence of stress dependency on the evaluation of high-temperature deformation resistance in SBS-modified asphalt	137049
Zhou, Jiajia / Xia, Gai / Wang, Peiying / Zhao, Jun / Xu, Li / Pan, Jinlong	Investigation of flexural cracks in engineered cementitious composites beams reinforced with CFRP bars	136900
Özkan, İffet Gamze Mütevelli / Aldemir, Kıymet / Alhasan, Omar / Benli, Ahmet / Bayraktar, Oguzhan Yavuz / Yılmazoglu, Mehmet Uğur / Kaplan, Gökhan	Investigation on the sustainable use of different sizes of sawdust aggregates in eco-friendly foam concretes: Physico-mechanical, thermal insulation and durability characteristics	137100
Liu, Hongwang / Lv, Canyu / Zhao, Sixue / Liu, Zhichao / Zheng, Yongchao / Wang, Fazhou	Ion-doped γ-C2S: Clinker characteristics, carbonation products, and carbonation properties	137033
Shen, Zihao / Liu, Wenguang / Zhong, Mingliang / Zhang, Qiang	Long-term performance of interlayer hybrid composites of polypropylene and glass fiber exposed to salt solution and deionized water at elevated temperatures	136879
Wu, Hao / Ji, Xiaohui / Song, Weimin / Wei, Jincheng / Sun, Yuxuan / Zhan, Yiqun / Zou, Xinhui	Mechanical behaviors and meso analysis of asphalt mixtures under moisture damage induced by hydrodynamic impacts	137048
Huang, Zhijie / So, Cek Sem / Chen, Wensu / Htet, Paing Min / Hao, Hong	Mechanical properties of basalt macro fibre reinforced geopolymer concrete	136974
Piolet, Elodie / Kamali-Bernard, Siham	Natural and accelerated carbonation of anhydrous reagents in slag cements	137068
Wang, Changqing / Yuan, Jiayu / Lu, Bo / Zhang, Youchao / Ma, Zhiming	New insights into the mechanical behavior and enhancement mechanism of micro-steel-fiber-reinforced recycled aggregate concrete through in-situ 4D CT analysis	137111
Ouyang, Xue / Huang, Yong	The optimal design of double-edge wedge-splitting tensile test for ultra high performance concrete	136998
Liu, Wenhuan / Jiang, Yiwen / Zhao, Zhongzhong / Lei, Fan / Li, Hui / Jiao, Xiaodong / Wang, Hongqi	Optimal development of the new type of ultra-fine fly ash semi flexible pavement grouting material: Rheological, mechanical, pore distribution, and hydration characteristics	137103
Thapa, Sunil / Huang, Zhongkuang / Bazli, Milad / Rajabipour, Ali / Dong, Zhiqiang / Hassanli, Reza / Arashpour, Mehrdad	Optimising compressive strength properties of seawater sea sand concrete-filled hybrid carbon-glass fibre-reinforced tubes: A study on the impact of layer sequencing	137155
Huang, Wei / Wang, Hao	Optimization of geopolymer pervious concrete design using multi-phase discrete element modeling	137034
Brandner, Reinhard / Ringhofer, Andreas / Sieder, Raimund	Out-of-plane bending properties of cross laminated timber (CLT)	136991
Ma, Zheyang / Ma, Hongrui / Ba, Mingfang / Ji, Luxin / Wang, Yang	Pozzolanic activity of secondary aluminum ash sintered and ground fine powder in Portland cement	137120
Kumar, Shashikant / Kumar, Rakesh / Rai, Baboo / Samui, Pijush	Prediction of compressive strength of high-volume fly ash self-compacting concrete with silica fume using machine learning techniques	136933
Li, Xiangguo / He, Chenhao / Lv, Yang / Jiang, Dongbing / Dan, Jianming / Chen, Yang / Li, Shuguo / Ma, Weinan	Preparation and properties of porous rice husk ash for internal curing of high performance cement pastes	137152
Zhang, Hong-liang / Zuo, Xiao-Bao / Sun, Qi-Quan / Liu, Jia-Yuan / Zou, Yu-Xiao / Zhang, Tian-tian / Tian, Jia-Li	Preparation of h-BN@ZnO composite epoxy coating for improve durability and antibacterial properties of concrete	137082
Jin, Jiaxu / Chen, Yongyong / Li, Mingxu / Liu, Tao / Qin, Zhifa / Liu, Qiang / Liang, Bing / Zhao, Jitao / Zuo, Shenghao	Preparation of self-consolidating cemented backfill with tailings and alkali activated slurry: Performance evaluation and environmental impact	137088
Zhou, Zhan / Cao, Jinde / Shi, Xinli / Zhang, Weiguang / Huang, Wei	Probabilistic rutting model using NGBoost and SHAP: Incorporating other performance indicators	137052
Feng, Shuyao / Zhang, Guofang / Ren, Yanli	Properties and microstructure of soil solidified by titanium slag-flue gas desulfurized gypsum-Portland cement composites as solidifiers	137061
Woskowski, Julia / Neumann, Andreas / Roggendorf, Hans / Wehrspohn, Ralf / Stöber, Stefan	Properties of low sulfur leached spodumene as supplementary cementitious material in ordinary Portland cement	137096
Gomes, Otávio J.F. / Lucas Júnior, Jorge L.O. / Bastos, Juceline B.S. / Soares, Jorge B.	Proposition of an aggregate-binder interface index based on the adhesiveness test assessed by digital image processing	137006
Chen, E. / Li, Y. X. / Zhang, S. S.	Quantitative monitoring of localized pitting corrosion in steel bars through a combined use of distributed optical fiber sensors and finite element analyses	136970
Ying, Xuejin / Zhao, Xiao / Cui, Han / Zhao, Jianjun	Recycled glass concrete with cementitious materials: Study of mechanical prediction model and dry shrinkage mechanism	137159
Singh Sidhu, Amandeep / Siddique, Rafat	Review on effect of curing methods on high strength concrete	136858
Liu, Xinghao / Chen, Zaixian / Yu, Zicong / Chen, Pang / Zhang, Yingzi	A review on ultra-high performance seawater sea sand concrete: Hydration, microstructure and properties	136945
Masoud, Laith / Hammoud, Ahmad / Mortada, Youssef / Masad, Eyad	Rheological, mechanical, and microscopic properties of polypropylene fiber reinforced-geopolymer concrete for additive manufacturing	137069
Vafaei, Babak / Ghahremaninezhad, Ali	Self-healing effect of hydrogels in cement slag and fly ash pastes	137036
Yu, Jiao / Wang, Kerui / Yang, Peixuan / Li, Mengmeng / Dong, Biqin / Jin, Zuquan / Hong, Shuxian / Ma, Hongyan	Simulation of calcium carbonate nucleation processes in confined C-S-H nanopores with different calcium-silicon ratios	137157
Sun, Huajun / Yang, Kangbo / Xiang, Nan / Tang, Guifeng / Zhang, Na / Wang, Chuanxing	Six-membered ring-reinforced flexible high-elongation block polyamide as strong and multi-reusable hot melt adhesive	137132
Martwong, Ekkachai / Yingshataporn-a-nan, Thanathach / Minanandana, Tanapat / Puksuwan, Kitchapat / Junthip, Jatupol / Sukhawipat, Nathapong	Sound absorption and thermal insulation materials from waste palm oil for housing application: Green polyurethane/water hyacinth fiber sheet composite	137007
Chu, S. H.	Strain-hardening ultra-high performance concrete (UHPC) with hybrid steel and ultra-high molecular weight polyethylene fibers	136716
Kampala, Apichit / Suebsuk, Jirayut / Daprom, Pattawitchaya / Arngbunta, Anukun / Chindaprasirt, Prinya	Strength characteristics and mix design of full-depth reclamation of asphalt pavement with cement	136901
Hou, Chen / Wang, Qing / Zheng, Xu / Zhang, Rui / Wang, Ning	Study of corrosion resistance of superhydrophobic hydrotalcite cement mortar in chlorine salt environment	137124
Zhang, Xijun / Du, Mingrui / Fang, Hongyuan / Yao, Xupei / Li, Bin / Zhai, Kejie / Du, Xueming / Shi, Mingsheng	Study on bearing capacity of corroded pipes before and after spraying rehabilitation	137020
Yu, Tianyou / Jiang, Guanlu / Rao, Qianzhu / Wu, Lin / Zhu, Dan	Study on macro-microscopic degradation properties of red mudstone under the influence of water vapor cycling	136981
Wang, Qiang / Zhang, Rongbing / Guo, Jiawei / Cai, Guojun / Li, Yafeng	Study on mechanical properties and microstructure of metakaolin-slag-calcium carbide residue synergistic solidifying waste engineering mud	137135
Chen, Jialin / Chen, Bo / Qiang, Sheng / Chen, Shoukai	Study on strength deterioration mechanism of foamed concrete under freeze-thaw cycles: Experiment and numerical simulation	137083
Jiang, Wei / Li, Jingxiao / Hou, Yukai / Yuan, Dongdong / Ling, Xianwu / Ren, Xueyuan	Study on the influence of void evolution of porous asphalt concrete on acoustic absorption performance under high-temperature loading	136992
Benli, Ahmet	Sustainable use of waste glass sand and waste glass powder in alkali-activated slag foam concretes: Physico-mechanical, thermal insulation and durability characteristics	137128
Beniddar, Hamza / El Machi, Aiman / El Abbassi, Fatima-Ezzahra / Taha, Yassine / Benzaazoua, Mostafa / Hakkou, Rachid	Sustainable utilization of phosphate mine waste rocks as sand substitutes in cement mortar production	136949
Kong, Peipei / Chen, Xianhua / Zhuo, Shangzhi / Leng, Zhen / Xu, Gang / Shen, Kairen / Wang, Shiqi / Zhou, Yixin / Teng, Guocui / Yang, Jun	Thermo-oxidative aging performance of mechanochemical activated rubber powder modified asphalt	137053
Zhang, Xiangdong / Geng, Jie / Hu, Guohang / Su, Lijuan / Li, Tianyu / Wang, Ye / Zheng, Chunyu / Li, Wenliang / Zhang, Xuefeng	Toughening characteristics of rubber granule-improved alkali-activated slag-stabilized aeolian sand	137059
Hasani, Alireza / Dorafshan, Sattar	Transforming construction? Evaluation of the state of structural 3D concrete printing in research and practice	137027
Anunike, Great S. / Tarabin, Mohamad / Hisseine, Ousmane A.	Ultra-high-performance concrete for nuclear applications: A review of raw materials and mix design approaches	136938
Lu, Xiaosong / Shang, Qiaoyan / He, Rui / Yao, Wenhao / Guo, Haoqin	Visible characteristics and durability assessment of methyl methacrylate-based luminescent road marking using unencapsulated SrAl2O4: Eu2+, Dy3+ under coupling service conditions	137071

Informations
sur cette fiche
IssueID
74269
Publié(e) le:
20.06.2024
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.