Construction and Building Materials - August 2024

Erschienen:	August 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Liu, Junli / Haikola, Pirjo / Fox, Kate / Tran, Phuong	3D printing of cementitious composites with seashell particles: Mechanical and microstructural analysis	136939
Assaggaf, Rida Alwi / Alhajji, Layan / Siddique, Salman / Adekunle, Saheed Kolawole	Accelerated carbonation curing of building mortars incorporating volcanic ash and brine sludge	137267
Al-Qaili, Abdulraaof H. / Al-Mansour, Abdullah I. / Al-Solieman, Hamad / Abduh, Zaid / Lee, Seongkwan Mark	Adaptation of an alternative neural network instead of ANN for backcalculating pavement layer moduli	137281
Pantò, B. / Ortega, J. / Grosman, S. / Oliveira, D. V. / Lourenço, P. B. / Macorini, L. / Izzuddin, B. A.	Advanced calibration of a 3D masonry arch bridge model using non-destructive testing and numerical optimisation	137131
Fathali, M. / Nasrabad, M. M. Kabiri / Abbasi, H. R. / Amrollahi, A. / Soleymani, M.	Aeolian sand challenges in desert rail infrastructures, overview of Iran’s experience and advancement	136953
Yang, Qiliang / Cai, Xu / Luo, Zhaoyang / Wu, Kuanghuai / Yu, Huayang / Li, Liansheng / Zhu, Yongqiang	Analysis of seepage behavior of porous asphalt pavement based on scale test and three-dimensional simulation	137185
Yu, Weixiao / Wang, Sudi / Miao, Yinghao	Analysis of the internal contact characteristics of aggregate blend using discrete element method	137302
Wu, Tong / Liu, Le / Han, Liting / Huang, Fenghua / Zhang, Dachang	Anchorage force transfer mechanism and bearing capacity theoretical of pawl bolt anchored in plain concrete	137145
Orozco, Carlos A. / Duque-Redondo, Eduardo / Aretxabaleta, Xabier M. / Manzano, Hegoi / Monteiro, Paulo J. M.	APTES/Calcium silica hydrate nano-hybrid composites with enhanced mechanical properties	137087
Gulzar, Saqib / Underwood, B. Shane	Asphalt binder characterization using waveform-based viscoelastic measures and time-temperature superposition principle under large strains	137177
Wang, Xiaoming / Xiao, Yuanjie / Li, Wenqi / Chen, Yuliang / Meng, Fanwei	Assessing particle crushing mechanism and optimizing design for recycled aggregates in road bases via a novel particle crushing DEM method	137046
Hamedi, Gholam Hossein / Nejad, Fereidoon Moghadas / Azarhoosh, Alireza	Assessing the influence of nano graphene oxide application in mitigating the adverse effects of runoff pH on the moisture susceptibility of asphalt concretes	137182
Azevedo, Adriano G. S. / Savastano, Holmer	Assessment of carbonation as a complementary strategy to increase the durability of Magnesium Oxysulfate (MOS)-based fiber cement boards	137086
Hou, Sailong / Li, Kai / Hu, Xiang / Shi, Caijun	Assessment on the heterogeneity and roughness of fracture surface of steel fiber reinforced concrete	137025
Li, Kang / Yang, Zhengxian / Nicolaides, Demetris / Liang, Minfei / Briseghella, Bruno / Marano, Giuseppe Carlo / Zhang, Yong	Autogenous shrinkage and sustainability assessment of alkali-activated slag incorporating steel slag	137219
Choudhry, Niranjan Kumar / Nguyen, Trung Kien / Nguyen-Van, Vuong / Panda, Biranchi / Tran, Phuong	Auxetic lattice reinforcement for tailored mechanical properties in cementitious composite: Experiments and modelling	137252
Wang, Yu-Hang / Zeng, Wenyan / Ayough, Pouria / Ren, Wei / Wang, Weiyong / Loganathan, Loginy / Yap, Soon Poh	Axial compression performance of rubberized concrete-filled steel tubular stub columns after fire exposure: Experimental investigation and calculation models	137129
Xu, Longkang / Yang, Yong / Yu, Yunlong / Zhang, Yang / Hao, Ning / Chen, Xin / Xue, Yicong	Behavior and shear strength of prestressed steel reinforced concrete composite deep beam	137222
Dushimimana, Aloys / Vassilopoulos, Anastasios P. / Sena-Cruz, José / Pereira, João M. / Correia, Luís / Cabral-Fonseca, Susana / Cruz, Ricardo	Behavior of CFRP composites and epoxy adhesives after long-term exposure to outdoor and laboratory-controlled environments	137201
Zhe, Rui / Zhou, Wei	Bend behavior of CFRP grid fabrics UHPC panels with serpentine connectors: Experiments, simulations and calculation formula	137171
Li, Zhi / Yao, Shengjie / Wang, Guichao / Liu, Qiong / Chen, Zhenkui / Wu, Xiaoxu / Luo, Yan	Binary surfactant-optimized silica aerogel slurries for building materials: Effects of formulation and content	137161
Balila, Amal / Vahdati, Maria	Biomimicry in construction: Glycoprotein-stabilised adobe bricks for enhanced compressive strength inspired by termites mounds	137077
Hutaibat, Mohammed / Ghiassi, Bahman / Tizani, Walid	Bond behaviour of prestressed basalt textile reinforced concrete	137309
Zhou, Junhao / Shang, Huaishuai / Huang, Yue / Zhao, Weiyue / Wang, Ruiping	Bond properties of GFRP bar embedded in marine concrete subjected to sustained loads	136982
Wang, Hai-Tao / Liu, Sai-Sai / Shi, Jia-Wei / Xu, Guo-Wen / Chen, Min-Sheng / Bian, Zhi-Ning	Bonded and unbonded strengthening of RC beams with the prestressed CFRP plate system: An experimental study	137118
Lin, Bozhong / Fang, Hu / Yao, Yao	Bonding performance of ethylene vinyl acetate reinforced carbon nanotube repair materials	137032
Sai, An / Baomin, Wang / Wenxiu, Chen	The cementitious properties of alkali-activated municipal solid waste incineration fly ash-phosphorus slag-secondary aluminum dross matrix composites and the mechanism of solidification of heavy metals	137254
Zhu, MingZheng / Ahmad, Muhammad Riaz / Wei, Zhiming / Chen, Bing	Characterization of cost-effective green engineered magnesium oxysulfide cement-based composites (MOSC-ECC) prepared by replacing MgO in magnesium oxysulfate cement with slag	137217
Zhu, Zhipeng / Song, Xiaoxue / Chi, Xiang / Zhao, Jingyao / Zhou, Qiaofang / Sanchez‑Ferrer, Antoni / Tu, Dengyun / Cheng, Wanli	Characterization of hygrothermal, gas pressure and stress characteristics for poplar wood during unilateral surface densification	137099
Wu, Fengnian / Lv, Weichao / Li, Kaiyue / Kong, Lingyao / Wang, Xuping / Chen, Heng / Huang, Yongbo / Wang, Shoude / Zhao, Piqi / Cheng, Xin	Chloride binding behavior and mechanism of phosphoaluminate cement clinker and its hydration products	137138
Moumni, Boutaina / Oulmekki, Abdallah / Kizinievič, Olga / Kizinievič, Viktor / Eliche-Quesada, Dolores / Charroud, Mohammed / El Moudden, Noureddine / Benmoussa, Hayat	Clay influence on lightweight brick’s properties: Investigating the impact of waste’s nature and amount as secondary variables	136844
Pang, Lang / Liang, Hongtao / Zhang, Dakang / Fang, Kuizhen	Combining thermodynamic modeling and experiments to characterize the effect of ceramic polishing powder in cement-based materials	137215
Alves, Zélia / Carvalheiras, João / Senff, Luciano / Lacasta, Ana M. / Cantalapiedra, Inma R. / Labrincha, João A. / Novais, Rui M.	A comparison between the use of cork and synthetic aggregates in the production of geopolymer composites	137147
Zeng, Lan / Liang, Xuqi / Lu, Huaqiang / Liu, Shi / Yuan, Hong / Mohamed, Hazem Samih	Compressive behavior of seawater and sea sand concrete-filled FRP-steel composite multi-tube hollow columns	137133
Leo, Emmanuel Safari / Alexander, Mark G. / Beushausen, Hans	Compressive strength and durability performance of limestone calcined clay cement concrete made from selected African raw materials	137012
Gong, Fuyuan / Peng, Yizhan / Wang, Zhao / Fujiyama, Chikako / Jin, Weiliang / Zhao, Yuxi / Maekawa, Koichi	Computational approach to the current and chloride ions distribution of reinforced concrete cathodic protection system	137078
Jin, Hesong / Cheng, Lei / Liu, Jun / Chen, Chaoyun / Xing, Feng	Converting municipal solid waste incineration bottom ash into the value-added artificial lightweight aggregates through cold-bonded granulation technology	136930
Zhang, Zhihui / Niu, Gang / Yang, Xiaojia / Chen, Haoxiu / Anijdan, S. H. Mousavi / Zhang, Pengcheng / Yu, Xinpan / Gong, Na / Liu, Hongfei / Mao, Xinping / Wu, Huibin	Corrosion resistance behavior of enhanced passivation Cr-modified rebars and their service life prediction based on Monte Carlo simulation	137130
Wei, Jingjie / Teng, Le / Khayat, Kamal H.	Coupled effect of fiber type and reinforcement ratio on flexural behavior of reinforced beams cast with super workable concrete	137039
Xia, Xing / Guo, Jinjun / Zhang, Peng / Yang, Lin / Zhu, Duo	A coupled hygro-thermal model for the performance evolution of mineral admixture concrete subjected to variable environmental conditions	137084
Huang, Yilin / Wu, Zhiheng / Liang, Lizhe / Ying, Jingwei / Gui, Lifa / Mo, Linqiang / Shen, Pei Kang / Tian, Zhi Qun	Critical role of vacancy defects in graphene nanosheets for enhancing asphalt binder	137139
Cho, Hyunmuk / Jung, Jongwon / Yang, Beomjoo / Hong, Won-Taek	Curing process monitoring of cementitious grout using time domain reflectometry (TDR) system	136729
Zeng, Lu / Wang, Wenting / Xiong, Shuangyan / Wang, Shuping / Zhang, Jianxin	Dehydration behaviors and properties of anhydrite II prepared by phosphogypsum with low-temperature calcination	136936
Zhu, Jianghong / Wang, Zhaoming / Zhang, Huyuan / He, Dongjin	Density spatial distribution and anisotropy of full-scale bentonite-sand blocks	137230
Yu, Xiaotao / Yuan, Yong / Liang, Chen / Wang, Xiaoyu / Wang, Siqi / Deng, Zhuowei	Development and characterization of high friction polyurethane bearings for bridge engineering applications	136846
Zhang, Juan / Xu, Tao	Developments and thermal properties of thermochromic microcapsule and thermochromic asphalt-based composite coatings	137184
Jin, Can / Xing, Shuning / Ge, Dongdong / Dong, Mansheng / Yan, Haixin / Yang, Xu	A digital measurement method for mean texture depth of asphalt pavement by virtual sand patch test	137308
Seo, Joonho / Park, Solmoi / Jin, D. W. / Park, Jihoon / Kil, Taegeon / Jang, Daeik / Kim, G. M.	Discrimination of the role of silica fume and nano-silica in alkali-activated slag paste	137092
Zheng, Heping / Pang, Bo / Jin, Zuquan / Zhang, Yunsheng / Hou, Dongshuai / Bi, Jinxu / Zhang, Wei / Yuan, Lianwang	Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations	137204
Li, Ziyun / Zhu, Yunhui / Zhang, Guanglei / Song, Yuqi / Zhao, Baoyun	Dynamic mechanical properties and constitutive model of oil-immersed and thermally-treated red sandstone	137015
Li, Mengyao / Zhang, Yuhao / Liu, Songyu / He, Huan / Wang, Zhengcheng / Zhang, Xiang	Dynamic properties of alkali residue-based foamed concrete under cyclic load	137060
Azimi, Nima / Schollbach, Katrin / Oliveira, Daniel V. / Lourenço, Paulo B.	Effect of acidic environment exposure on mechanical properties of TRM composites	137142
El Inaty, François / Marchetti, Mario / Quiertant, Marc / Omikrine Metalssi, Othman	Effect of curing on the coupled attack of sulfate and chloride ions on low-carbon cementitious materials including slag, fly ash, and metakaolin	137307
Yang, Guangming / Xu, Chengwei / Zhang, Jingchen / Liu, Chao / Cui, Huaiyun / Zeng, Lulu / Liu, Zhiyong / Du, Cuiwei / Li, Xiaogang	Effect of dissolved oxygen on corrosion behavior and mechanism of X70 pipeline steel in simulated low temperature bentonite-containing alkaline chloride environment	137170
Ali, Amr E. / Serag Faried, A. / Osman, Khaled M.	Effect of elevated temperature on properties of concrete containing different types of nano-materials	136988
Xu, Jun / Liu, Minghao / Kang, Aihong / Wu, Zhengguang / Kou, Changjiang / Zhang, Yao / Xiao, Peng	Effect of fiber characteristic parameters on the synergistic action and mechanism of basalt fiber asphalt mortar	137234
Shao, Conghao / Xu, Zhiyuan / Liu, Ze / Zhang, Yanbo / Wang, Dongmin	Effect of hydration degrees on the accelerated carbonization (3 % CO2) behavior of natural hydraulic lime	137297
Yao, Yujin / Zhou, Xiaowei / Li, Guanyu / Chen, Huaxin / Li, Nan / Wu, Yongchang	Effect of multiple environmental conditions on the formation process and adhesion strength of ice on asphalt binder surface	137065
Li, Shuai / Tan, Yiqiu / Fu, Yongkang / Li, Jilu / Ye, Wanli / Li, Guannan / Liu, Xinye	Effect of phase change materials on thermophysical properties of asphalt mixtures and snow melting performance	136968
Duan, Jiaqi / Sun, Shouzheng / Chi, Shengfeng / Hu, Chunyou / Ling, Chaowei / Fu, Hongya / Han, Zhenyu	Effect of process parameters on forming quality and flexural strength of continuous fiber reinforced cement-based 3D printed composites	137241
Zhang, Jianwei / Chen, Meizhu / Wan, Lu / Wu, Shaopeng / Zhao, Yuechao / Chen, Dongyu / Fan, Yansong	Effect of recycled agricultural waste on fume emission and physicochemical properties of crumb rubber modified asphalt	137093
Li, Bing / Giordano, Roberto / Tulliani, Jean-Marc / Meng, Qinglin	Effect of sea salt on carbonation and CO2 uptake in cement mortar	137212
Chen, Tao / Peng, Tongjiang / Sun, Hongjuan / Ding, Wenjin / Chu, Lingyan / Wu, Mengji / Li, Xiang	Effect of SiO2/MgO ratio on the properties of diopside-based ceramics	137085
Pan, Ye / Lu, Zichen / Wang, Lei / Yang, Xiaojie / Li, Juan / Gao, Ruijun / Sun, Zhenping	Effect of styrene acrylic latex on the performance of metakaolin blended cement: From hydration to mechanical properties	137289
Gu, Yu-Cun / Khayat, Kamal H.	Effect of superabsorbent polymer on 3D printing characteristics as rheology-modified agent	137140
Zeng, Lingtao / Geng, Yundi / Li, Teng / Zhang, Hankun / Zhang, Runchu / Yuan, Zhao / Liu, Changjiang / Yang, Chuncheng / Li, Hongchao / Li, Yan	Effect of ZrO2-TiO2 co-doping on the structure, alkali resistance and mechanical properties of basalt fibers	137312
Li, Yang / Li, Haiyan / Wang, Jianxi / Chen, Jinjie / Wang, Rui / Yu, Jianghao	Effects of dual application of interface adhesives and solar reflective coatings on damage of longitudinally continuous slab tracks	137112
Jiang, Jinyi / Guo, Xiuwang / Hao, Peiwen / Guo, Xiaogang / Huang, Simin / Chen, Kai	Effects of SARA fractions on the rheological properties and microscopic behavior of hard asphalt	137055
Lu, Cuifang / Zhang, Zuhua / Deng, Yulin / Hu, Jie / Yu, Qijun / Shi, Caijun	Effects of silica fume/ultrafine fly ash on the rheology and hardening of alkali-activated slag-waste ceramic powder paste	137265
Zhang, Mengxu / Yuan, Dongdong / Jiang, Wei	Effects of TLA on rheological, aging, and chemical performance of SBS modified asphalt	137283
Sarkar, Md. Tanvir A. / Elseifi, Mostafa A. / Hossain, Zahid	Effects of warm-mix additives, anti stripping agent, and graphene nanoplatelet on the cracking resistance, moisture susceptibility, and cost effectiveness of stone mastic asphalt	137250
Sengupta, Jayashree / Dhang, Nirjhar / Deb, Arghya	Efficient mix design of one-part alkali-activated concrete using packing density method and its optimization through Taguchi-GRA	136869
Zhang, Mingzhe / Zhao, Yixin / Chen, Bing	Efflorescence mitigation in fly ash/slag-based geopolymers: The role of precursor composition and proportions, and admixtures	137216
Li, Junxing / Yang, Jiajia / Liu, Qi / Xu, Jun / Zhang, Wenyuan / Yang, Qiyong	An elastoplastic damage ice material model based on modified Tsai-Wu yield criterion: Experiment, theory and numerical application	137149
Liang, Dong / Fang, Ke-Wei / Zhang, Jin-Qiu / Huang, Hai-Bin / Huang, Ming-Jian / Du, Peng	Electrical behavior analysis of the cementitious capillary crystalline conductive coatings for monitoring concrete strains and cracks	137294
Montazerian, Arman / Tagarielli, Vito / Pinho, Silvestre / Øverli, Jan Arve / Goutianos, Stergios	Electrical conductivity of multifunctional cementitious composites reinforced by graphene derivatives: A finite element-based computational micromechanics model	137162
Yin, Tianxiao / Wang, Zhiqiang / Sun, Chuang / Zhou, Wenzhe / Reynolds, Thomas	Embedment behaviour of hybrid cross-laminated timber (HCLT) made of fast-growing Chinese fir and OSB	137117
Hamza Ahmed, Ameer / Signorini, Cesare / Chikhradze, Mariam / Liebscher, Marco / Butler, Marko / Mechtcherine, Viktor	Employing limestone and calcined clay for preserving the strain-hardening response of PET fiber-reinforced cementitious composites	137166
Liu, Qiao / Zeng, Jingyi / Chen, Shun / He, Xingyang / Su, Ying / Hu, Shengfei / Yang, Chao / Zheng, Gehua	Enhancement of bitumen aging resistance by nanomicron porous eggshell loaded with waste engine oil prepared under mechanical force	137101
Diao, Zhaoxu / Gan, Xingyu / Xu, Jun / Jin, Yuan / Zhang, Haiming / Li, Laibo / Lu, Lingchao / Cheng, Xin	Enhancement of mechanical properties, durability and service life of low carbon cement paste with super low w/c ratio by incorporating carbon fiber	137035
Zhang, Mo / Qiu, Xinxin / Zhang, Ruochen	Enhancing alkali resistance of recycled GFRP fibers and mechanical performances of cement mortars with microbial induced carbonate precipitation	137091
Wang, Xianxing / Wang, Wenjing / Liu, Yuanzhen / Duan, Pengfei / Liang, Xiaorui / Zhang, Hongzhi / Ge, Zhi	Enhancing chloride ion permeability resistance of recycled aggregate concrete through internal curing with glazed hollow beads	137293
Nian, Tengfei / Wang, Maomin / Ge, Jinguo / Guo, Rui / Li, Piyi / Song, Jiaqi	Enhancing low-temperature crack resistance: A method for establishing meso-models and evaluating steel fiber-reinforced hot recycled asphalt mixtures	137026
Ibrahim, Mohammed / Salami, Babatunde Abiodun / Khallaf, Zaid / Bahraq, Ashraf A. / Adewumi, Adeshina Adewale	Evaluating long-term durability of nanosilica-enhanced alkali-activated concrete in sulfate environments towards sustainable concrete development	137315
Oyelere, Abeeb / Wu, Shenghua / Hsiao, Kuang-Ting / Kang, Min-Wook / Dizbay-Onat, Melike / Cleary, John / Venkiteshwaran, Kaushik / Wang, Jinhui / Bao, Yi	Evaluation of cracking susceptibility of asphalt binders modified with recycled high-density polyethylene and polypropylene microplastics	136811
Diao, Yu / Hu, Qingsong / Huang, Jianyou / Guo, Xin / Li, Pengjin / Liu, Xuanqi / Bai, Jitao	Evaluation of mechanical properties and potential environmental applications of biomimetic mineralized composites	136976
Hu, Haibo / Yao, Wu / Wei, Yongqi / She, Anming	Evolution of early hydration in mortar by using waste dolomite powder as a micro-aggregate	137158
Guo, Zhaoheng / Ni, Yingying / Xu, Zhenhai / Chen, Gaofeng / Wu, Huixia / Liu, Cheng / Gao, Jianming / Du, Hongjian	Evolution of in-situ pore structure of nanosilica modified high-volume blast furnace slag cementitious materials under sulfate attack	136937
Li, Qianlong / Wang, Bingwen / Wei, Zhao / Zhong, Yi	Experiment and numerical simulation study of polycarboxylate superplasticizer modified cemented ultrafine tailings filling slurry: Rheology, fluidity, and flow properties in pipeline	137041
Liu, Cong / Xiao, Jianchun / Ma, Kejian / Liu, Zhuoqun / Zhang, Hanming / Qiu, Yun	Experimental and numerical investigation on short CHS steel columns restrained with HFRP under axial compressive loading	136715
Zhang, Chao / Liu, Shiming / Xia, Yangyang / Wang, Cuixia / Qiao, Shi / Fang, Hongyuan	Experimental and numerical investigations of an auxetic support structure used for local repair of buried pipelines	137127
Huang, Yijie / Cheng, Zihang / Dong, Li / Cao, Pinliang / Zhong, Jitao / Wang, Qing / Loan, Pham	Experimental and numerical studies on the improvements in mechanical properties of coral aggregates concrete through aggregates strengthening method	137243
Esfahani, Ali Naseri / Zareei, Seyed Alireza / Birzhandi, Mohammad Sadegh / Zafarani, Mohammad Mahdi	Experimental and numerical study of the centripetal behavior of the divergent bracing frame equipped with rotational friction damper and shape memory bolts	137245
Zhang, Xiangcheng / Li, Yue / Sun, Panxu	Experimental and theoretical study on the bonding property between PC steel bar and concrete under monotonic and cyclic loading	137197
Bravo, Tomas P. / Gattas, Joseph M. / Bravo, Felipe / Astroza, Rodrigo / Maluk, Cristián	Experimental assessment of modal properties of hybrid CFRP-timber panels	137075
Dong, Zhiqiang / Sun, Xinliang / Sun, Yu / Zhu, Hong / Wang, Haitao / Zhang, Pu / Sun, Zeyang	Experimental investigation on anchoring and bonding properties between Fe-SMA strip and concrete	137141
Vafadar, Farid / Jaaranen, Joonas / Fink, Gerhard	Experimental stiffness investigation of finger joints in glued laminated timber beams using digital image correlation	137095
Chang, Hong / Gan, Zhengheng / Jiang, Sheng / Li, Yunjie / Jiang, Haozhi / Zhao, Songying	Experimental study of phase change energy pile based on Gum Arabic and Polyethylene Glycol 600 under multiple Thermal-Cold cycles	137109
Zhang, Jingyi / Peng, Jiahao / Hou, Chao / Lin, Guan	Experimental study on bond behavior between wet lay-up CFRP and corroded steel plates	137024
Du, Changbo / Li, Dongze / Yi, Fu / Wang, Meng / Niu, Ben	Experimental study on fiber-reinforced cement tailings sand-based grouting material preparation and factors influencing the grouting effect	137104
Chen, Qing-Jun / Lei, Jun / Bradford, Mark A. / Liu, Xinpei / Zhang, Yu-Qi / Qiu, Kai-Xiang / Tang, Xu-Lin / Cai, Jian	Experimental study on seismic performance of spatial and planar hoop-head mortise and tenon timber joints in historical architecture	136989
Zhao, Lei / Jiang, Dianyou / Zhao, Guotang / Sun, Jianxun / Yang, Guotao	Experimental study on the dynamic characteristics of bi-block ballastless track under the combined action of vehicle load and temperature gradient	137107
Zhu, Xingyu / Zhang, Zhiqiang / Zheng, Chuantian / Wei, Jia	Experimental study on the mechanical properties and creep-related behaviors of peridotite under gradient of loading	136952
Shahrbijari, Kamyar B. / Barros, Joaquim A. O. / Valente, Isabel B.	Experimental study on the structural performance of concrete beams reinforced with prestressed GFRP and steel bars	137031
Matthews, Benjamin / Palermo, Alessandro / Logan, Tom / Scott, Allan	Experimental testing and predictive machine learning to determine the mechanical characteristics of corroded reinforcing steel	137023
Rocha, Marcos Lamha / Enríquez-León, Alexis Jair / Sacramento Aragão, Francisco Thiago / Pinto Espíndola, Rogério / Nascimento, Luis Alberto Herrmann do	Exploring the effects of volumetrics and binder properties on the performance of asphalt mixtures	137054
Zhu, Xingji / Xu, Longjun / Wu, Pangang / Xiao, Changrong / Wang, Yujin / Lin, Shibin / Zhao, Jinhui	Failure mode of passive film under electric field and chloride environment in concrete	137080
Fan, Yulou / Yu, Yunhong / Shi, Chenguang / Wu, You / Huang, Siqi / Zhou, Yixin / Wang, Houzhi / Yang, Jun / Huang, Wei	Failure modes of asphalt pavement with top-down cracks based on measured aging gradients in field cores	137050
Zhang, Sheng / Xu, Ding-ping / Qiu, Shi-li / Feng, Guang-Liang / Jiang, Quan	A fatigue damage model for sandstone based on acoustic emission and resistivity parameters	137286
Ming, Jing / Zhou, xiaocheng / Shi, Jinjie	Feasibility of using 2304 duplex stainless steel in seawater-mixed concrete pore solutions: A preliminary passivation consideration	137037
Han, Shuai / Wang, Yue / Wang, Qin / Han, Lu / Han, Guang	Film-formation processes of polymer emulsions in polymer-cement waterproof coatings and their effect on coatings’ macroscopic properties	137137
Li, Qianlong / Wang, Bingwen	Flowability, microstructure, early and long-term strength modification of cemented ultrafine tailings backfill using artificial lightweight aggregates	137253
Qin, Heying / Li, Chunde / Luo, Boguang / Tang, Pengfei	Force monitoring in steel-strand anchor cables using quasi-distributed embedded FBG sensors	137192
Motevalizadeh, Seyed Mohsen / Mollenhauer, Konrad / Wetekam, Jens	FTIR spectroscopy and multivariate discriminant analysis for classifying bituminous mastics: Exploring aging states and mastic composition	137188
Cunha, Sandra / Sarcinella, Antonella / Reis, Nuno / Aguiar, José / Frigione, Mariaenrica	High temperature performance of cement mortars with incorporation of PEG-based form-stable Phase Change Materials	136946
Shangguan, Minghui / Xie, Youjun / Long, Guangcheng / Long, Zhaofei / Wang, Fan / Chen, Yue / Gao, Ce / Tang, Zhuo	Hydration and microstructure evolution of cement paste in low vacuum environments	137233
Li, Jiye / Qu, Yandong / Li, Jiangchuan / Wang, Lei / Peng, Yongpeng / Chang, Jun	Hydration mechanism and kinetic response of a C4A3$-C2S binary system	137067
Wang, Xuhui / Zhang, Tongsheng / Chen, Peixin / Xu, Guolin / Guo, Yiqun / Wei, Jiangxiong / Yu, Qijun	Hydration mechanism and microstructure evolution of recycled brick powder blended cement toward low-carbon and cleaner production	137097
Jiang, Jun / Wu, Jiaming / Yang, Qingchun / Li, Quanliang / Lu, Xiaolei / Ye, Zhengmao	Hydration of Portland cement in the presence of triethanolamine and limestone powder: Mechanical properties and synergistic mechanism	137323
Bahulayan, Asha / Santhanam, Manu	Hydration, phase assemblage and microstructure of cementitious blends with low-grade limestone	137044
Jiang, Guanzhao / Zhao, Liangliang / Li, Hong / Wu, Shunchuan / Cheng, Haiyong / Sun, Wei / Wu, Aixiang / Chen, Chong	Immobilization of phosphorus and fluorine from whole phosphogypsum-based cemented backfill material with self-cementing properties	137072
Maglad, Ahmed M. / Othuman Mydin, Md Azree / Datta, Shuvo Dip / Abbood, Imad Shakir / Tayeh, Bassam A.	Impact of anionic surfactant-based foaming agents on the properties of lightweight foamed concrete	137119
Chen, Leilei / Zhao, Xinyuan / Ma, Wenqi / Qian, Zhendong / Yu, Ruien	The impact of seepage effect on repaired interface failure in steel bridge deck pavement: A case of pothole distress	137189
Mohsen, Alaa / Amin, M. S. / Selim, Faten A. / Ramadan, M.	The impact of wurtzite and mesoporous Zn-Al-CO3 LDH on the performance of alkali-activated-slag: Setting times, compressive strength, and radiation attenuation	137218
Liu, Kaiqiang / Yang, Cheng / Zheng, Youzhi / Mei, Chao / Jiao, Libin / Wang, Fuyun / Zhao, Jun / Zhang, Xingguo	Improvement of the microstructure of hydration products in cement paste by epoxy resin under high temperature and high pressure	137167
Ou, Xiaoduo / Ye, Gengchang / Jiang, Jie / Gong, Jian / He, Zujie	Improving electrical and mechanical properties of cement composites by combined addition of carbon black and carbon nanotubes and steel fibers	136931
Paula Junior, Adilson Campos / Teixeira, Elisabete / Mateus, Ricardo	Improving the mechanical, thermal and durability properties of compressed earth blocks by incorporating industrial waste and by-products: A systematic literature review	137063
Zhang, Jiazheng / Mao, Yanpeng / Wei, Guangshuo / Jin, Yang / Wang, Xujiang / Li, Jingwei / Pang, Dongjie / Wang, Wenlong	Improving the performance of iron-rich calcium sulfoaluminate cement from municipal solid waste incineration fly ash through diverse pretreatment approaches	136929
Xia, Mingyao / Tan, Jiawei / Gao, Han	Improving the stabilization/solidification performance of Pb-containing alkali-activated slag via incorporation of superabsorbent polymer	137165
Dang, Juntao / Hao, Lukai / Wang, Tingyan / Xiao, Jianzhuang / Zhao, Hang	Improving thermal conductivity and drying shrinkage of foamed concrete with artificial ceramsite from excavation soil and sewage sludge	137010
Sui, Xin / Leng, Zhen / Wang, Siqi / Cai, Xing / Gong, Minghui / Zhang, Lei	In-situ grouting rate prediction of semi-flexible pavement based on a novel composite dielectric constant model and ground-penetrating radar	137209
Harzali, Hassen / Zawrah, M. F. / Aldarhami, S. / Tantawy, M. A.	Influence of granite on physico-chemical properties of pozzolanic cement pastes prepared from volcanic ash and lime	137113
Zhang, Dongsheng / Zhu, Tao / Yang, Qiuning / Vandeginste, Veerle / Li, Jiabin	Influence of ground granulated blast furnace slag on recycled concrete powder-based geopolymer cured at ambient temperature: Rheology, mechanical properties, reaction kinetics and air-void characteristics	137190
Xu, Gelong / Wu, Hao / Cai, Jiwei / Guo, Shaokun / Zhang, Zhen / Shen, Weiguo / Tian, Qing	Influence of mortar thickness on the dynamic segregation of high-fluidity concrete	137153
Nakase, Kota / Hashimoto, Katsufumi / Sugiyama, Takafumi / Kono, Katsuya	Influence of print paths on mechanical properties and fracture propagation of 3D printed concrete	137019
Deng, Ziming	Influence of recycled rubber and glass aggregates on magnesium sulfate resistance of geopolymers: Physio-mechanical properties and mechanisms	137134
Wang, Jilin / An, Junlin / Li, Yingjie / Xiang, Yu / Xiao, Qiyuan / Tang, Zhuo / Long, Guangcheng	Influencing factors of the temperature rise of direct electric curing concrete and its effect on concrete properties	137110
Tian, Jun / Wu, Xiaowei / Zuo, Yang / Yuan, Jinyun / Wang, Wen-Wei	Interface behaviors between smart-functional ECC and steel rebar under coupling effect of sustained load and chloride ion erosion: Corrosion resistance, mechanical and self-sensing properties	137205
Han, Jihong / Li, Bo / Ji, Haidong / Guo, Fucheng / Wei, Dingbang / Cao, Shenyang / Zhang, Wan / Chen, Xin	Interfacial adhesion between recycled asphalt binder and aggregates considering aggregate surface anisotropy: A molecular dynamics simulation	137176
Zhang, Xiaoyan / Meng, Lingfeng / Li, Dongyang / Ye, Yonghua / Wei, Kaiyuan	Investigating correlations between microstructural characteristics and mechanical properties of coral sand mortar with different silica fume contents	137180
Yu, Yong / Xu, Jinjun / Su, Jie / Xu, Lei / Luo, Yong	Investigating specimen size and shape effects on compressive mechanical behaviors of recycled aggregate concrete using discrete element mesoscale modeling	137196
Seif, Mohammad Esmaeil / MolaAbasi, Hossein / Saba, Hamidreza / Mirhosseini, S.Mohammad	Investigating the impact of nano-colloidal silica on sandy clay strength: Experimental results and stress-strain modeling insights	137105
Zhou, Shengxiong / Yan, Jiqiang / Li, Linyu / Li, Siqi / Wu, Shenmo / Yan, Chuanqi / Ai, Changfa	Investigating the influence of stress dependency on the evaluation of high-temperature deformation resistance in SBS-modified asphalt	137049
Li, Pengfei / Zhang, Zhiqing / Cao, Zhilong / Yu, Jingyang	Investigating the thermodynamic properties and healing behaviour of salt storage asphalt mastic based on molecular dynamics	137181
Min, Fanlu / Dai, Junjie / Zhang, Nan / Ma, Jiawei / Zhang, Lei / Li, Bingzhi	Investigation into strength development mechanism of lime-modified dehydrated clay of slurry shield tunneling operation	137224
Cheng, Long / Yuan, Wanshan / Zhang, Lei / Zhou, Song / Zhang, Zijian / Ma, Yang / Yuan, Fang / Liu, Zhenqing	Investigation of damage and crack characteristics of epoxy modified recycled asphalt mixtures based on a three-dimensional meso-heterogeneous model	137144
Zhou, Jiajia / Xia, Gai / Wang, Peiying / Zhao, Jun / Xu, Li / Pan, Jinlong	Investigation of flexural cracks in engineered cementitious composites beams reinforced with CFRP bars	136900
Özkan, İffet Gamze Mütevelli / Aldemir, Kıymet / Alhasan, Omar / Benli, Ahmet / Bayraktar, Oguzhan Yavuz / Yılmazoglu, Mehmet Uğur / Kaplan, Gökhan	Investigation on the sustainable use of different sizes of sawdust aggregates in eco-friendly foam concretes: Physico-mechanical, thermal insulation and durability characteristics	137100
Liu, Ke / Yang, Qing / Qiu, Xin / Xu, Wenyi / Xiao, Shanglin / Gu, Yu / Ye, Yingci	An investigation toward adhesion characteristics of emulsified asphalt residue–aggregate interface through MD simulation	137251
Liu, Hongwang / Lv, Canyu / Zhao, Sixue / Liu, Zhichao / Zheng, Yongchao / Wang, Fazhou	Ion-doped γ-C2S: Clinker characteristics, carbonation products, and carbonation properties	137033
Jin, Dongzhao / Mohammadi, Sepehr / Xin, Kai / Yin, Lei / You, Zhanping	Laboratory performance and field demonstration of asphalt overlay with recycled rubber and tire fabric fiber	136941
Wu, Jiamin / Ye, Haoran / Li, Suiyi / Que, Zeli / Peng, Yucheng / Cai, Liping / Xia, Changlei	Life cycle assessment of transparent wood in building industry: a sustainable solution for global warming mitigation	137303
Schueftan, Alejandra / Buchner, Carlos / Rüther, Norbert / García, Sol	Linking energy efficiency and waste recovery to improve housing insulation and tackle energy poverty in south-central Chile	137045
Shen, Zihao / Liu, Wenguang / Zhong, Mingliang / Zhang, Qiang	Long-term performance of interlayer hybrid composites of polypropylene and glass fiber exposed to salt solution and deionized water at elevated temperatures	136879
Xia, Jianchao / Huang, Yimiao / Zhang, Ruochen / Liu, Jiaping / Ma, Guowei	Low-carbon microwave curing of limestone calcined clay cement (LC3): Performance and mechanism	137257
Si, Wei / Zhang, Bowen / Zhang, Xing / Xia, Wei / Cheng, Xu / Luo, Xiangyu / Hu, Yongping	Maximizing the circularity of asphalt pavements by improving the RAP content in recycled asphalt mixtures	137316
Wu, Hao / Ji, Xiaohui / Song, Weimin / Wei, Jincheng / Sun, Yuxuan / Zhan, Yiqun / Zou, Xinhui	Mechanical behaviors and meso analysis of asphalt mixtures under moisture damage induced by hydrodynamic impacts	137048
Shi, Yu / Luo, Zeqiao / Zhou, Xuhong / Xue, Xuanyi / Xu, Jinyong	Mechanical properties and constitutive model of cold-formed Q1100 ultra-high strength steel sections at low and elevated temperatures	137081
Huang, Zhijie / So, Cek Sem / Chen, Wensu / Htet, Paing Min / Hao, Hong	Mechanical properties of basalt macro fibre reinforced geopolymer concrete	136974
Yu, Wenxuan / Xie, Chenxi / Jin, Liu / Du, Xiuli / Wang, Jinting	Mechanism analysis on tensile fracture properties of heterogeneous BFLAC at cryogenic temperature: Experimental investigation and mesoscale simulation	137206
Yu, Tengjiang / Wang, Jingjing / Zhang, Haitao / Sun, Junzu	Microanalysis of behavior characteristics for asphalt binders on different mineral surfaces based on MD and SEM	137292
Hou, Huiming / Gong, Chengxi / Hu, Dawei / Wang, Wei	A microcrack-based anisotropic damage model for concrete under mechanical loading and calcium leaching	137272
Guo, Yadong / Zhou, Tianyang / Vasoya, Manish / Lagoudas, Dimitris / Birgisson, Björn	Micromechanics modeling of cement concrete considering the interaction among randomly oriented ellipsoidal inhomogeneities	137193
Chowdhury, Nilufar / Ghasemi-Fare, Omid	Microstructural analysis of the pore size and volume distribution of bentonite at two different hydraulic states utilizing different drying techniques	137223
Meng, Xiangrui / Jiang, Yu / Chen, Bing / Wang, Liyan	Modification of magnesium phosphate cement with steel slag powder and ground blast furnace slag: Mechanism of hydration and electrical conductivity	137305
Yang, Guang / Chen, Xi / Xu, Jie	Molecular dynamics simulation of interfacial mechanical properties of crumb rubber concrete	137336
Xing, Baodong / Fang, Chen / Lyu, Xiaobo / Yang, Jianming / Lyu, Yuchao / Fan, Weiyu	Morphology characteristics of filler particles and their effects on the low–temperature cracking behavior of asphalt mastics	137057
Jeon, Dongho / Moon, Juhyuk	NaHCO3-induced carbonation reaction for enhancing the properties of CaO-activated GGBFS	137076
Piolet, Elodie / Kamali-Bernard, Siham	Natural and accelerated carbonation of anhydrous reagents in slag cements	137068
Liu, Zhixia / Cao, Dingfeng / Guo, Chengchao / Wang, Fuming / Ma, Baosong / Wu, Jinghong / Wang, Deyong / Liang, Xiaocong	A new insight to investigate the strain distribution, evolution, and crack development of cement-stabilized coral aggregate	137263
Wang, Changqing / Yuan, Jiayu / Lu, Bo / Zhang, Youchao / Ma, Zhiming	New insights into the mechanical behavior and enhancement mechanism of micro-steel-fiber-reinforced recycled aggregate concrete through in-situ 4D CT analysis	137111
Trávníček, Pavel / Koudelka, Tomáš / Kruis, Jaroslav / Msallamová, Šárka / Němeček, Jiří	A new model for chloride ion diffusion in cracked concrete with consideration of damage and strain fields	136920
Xu, Jiankun / Yang, Zhengxian / Lu, Lin / Wang, Wencheng / Briseghella, Bruno / Marano, Giuseppe Carlo	New S-g-C3N4 based photocatalytic mortar with long-term photocatalytic performance by constructing three-dimensional structure Mg-Al layered double hydroxides	137199
Shi, Chong / Chen, Yao / Zhang, Lingkai / Zhang, Xiaoying / Qiu, Liewang	Numerical study on mechanical characteristics of gabion mixed media with discrete element method	137108
Ouyang, Xue / Huang, Yong	The optimal design of double-edge wedge-splitting tensile test for ultra high performance concrete	136998
Liu, Wenhuan / Jiang, Yiwen / Zhao, Zhongzhong / Lei, Fan / Li, Hui / Jiao, Xiaodong / Wang, Hongqi	Optimal development of the new type of ultra-fine fly ash semi flexible pavement grouting material: Rheological, mechanical, pore distribution, and hydration characteristics	137103
Thapa, Sunil / Huang, Zhongkuang / Bazli, Milad / Rajabipour, Ali / Dong, Zhiqiang / Hassanli, Reza / Arashpour, Mehrdad	Optimising compressive strength properties of seawater sea sand concrete-filled hybrid carbon-glass fibre-reinforced tubes: A study on the impact of layer sequencing	137155
Huang, Wei / Wang, Hao	Optimization of geopolymer pervious concrete design using multi-phase discrete element modeling	137034
Li, Yong / Li, Yanlong / Liu, Jihan / Li, Weimei / She, Lei	Optimization of some properties of hydraulic asphalt concrete mix using RSM and NSGA-II	137317
Brandner, Reinhard / Ringhofer, Andreas / Sieder, Raimund	Out-of-plane bending properties of cross laminated timber (CLT)	136991
Vailati, Marco / Mercuri, Micaela / Gregori, Amedeo	Out-of-plane non-intrusive seismic retrofitting of in-plane damaged masonry infill through 3D printed recycled plastic devices	137256
Ponsi, Federico / Bassoli, Elisa / Buratti, Nicola / Vincenzi, Loris	Parameter estimation and uncertainty quantification of a fiber-reinforced concrete model by means of a multi-level Bayesian approach	136994
Abedraba-Abdalla, M. / Thom, Nick / Garcia-Hernández, A. / Li, Linglin	Particle loss mitigation in asphalt by the addition of polyethylene foam	137208
Zhang, Wenhui / Ge, Dongdong / Lv, Songtao / Cao, Sihao / Ju, Zihao / Duan, Wenjie / Yuan, Haoyun	Performance evaluation of bio-oil and rubber compound modified asphalt mixture: Lower mixing temperature and carbon emission	137269
Xing, Chao / Zheng, Guiping / Yu, Chao / Zhang, Lei / Shan, Mingyu / Tan, Yiqiu	Phase-change pavement structures with gradient low-thermal conductivity for permafrost protection	137168
Werkovits, Stefan / Bacher, Markus / Mirwald, Johannes / Rosenau, Thomas / Hofko, Berhard / Grothe, Hinrich	Photo-induced ageing processes in bitumen	137186
Shee-Ween, Ong / Cheng-Yong, Heah / Yun-Ming, Liew / Li-Ngee, Ho / Wei-Hao, Lee / Abdullah, Mohd Mustafa Al Bakri / Pakawanit, Phakkhananan / Wei-Ken, Part / Yong-Jie, Hang / Jia-Ni, Lim / De-Wei, Gao / Mei-Ju, Liu	Physico-mechanical and microstructural evolution of sintered pressed geopolymer: Dual effects of aging period and sintering temperature	137242
Huang, Peng / Wang, Tianling / Zhou, Yixin / Fan, Yulou / Wu, You / Wang, Houzhi / Yang, Jun / Huang, Wei	Piezoresistive response of MWCNTs/Epoxy mixtures with load-sensing capability	137203
Alzein, Razan / Kumar, M. Vinod / Raut, Ashwin Narendra / Alyaseen, Ahmad / Sihag, Parveen / Lee, Daeho / Kumar, Raj / Singh, Tej	Polypropylene waste plastic fiber morphology as an influencing factor on the performance and durability of concrete: Experimental investigation, soft-computing modeling, and economic analysis	137244
Cui, Xianze / Zhang, Huahua / Wu, Dazhou / Yang, Guangdong / Fan, Yong	Porosity and hydraulic conductivity of gap graded natural sand considering shape parameters	137163
Ma, Zheyang / Ma, Hongrui / Ba, Mingfang / Ji, Luxin / Wang, Yang	Pozzolanic activity of secondary aluminum ash sintered and ground fine powder in Portland cement	137120
Bamshad, Omid / Jamhiri, Babak / Habibi, Alireza / Salehi, Sheyda / Aziminezhad, Mohamadmahdi / Mahdikhani, Mahdi	Predicting corrosion of recycled aggregate concrete under sulfuric acid rain using machine learning and uncertainty analysis	137146
Kong, Fanmeng / Xue, Yiguo / Shang, Junlong / Zhu, Chun / Han, Mingyi / Qu, Ziming / Wang, Bo / Yang, Kun	Predicting uniaxial compressive strength of building stone based on index tests: Correlations, validity, reliability, and unification	137227
Kumar, Shashikant / Kumar, Rakesh / Rai, Baboo / Samui, Pijush	Prediction of compressive strength of high-volume fly ash self-compacting concrete with silica fume using machine learning techniques	136933
Tang, Chengxiang / Liu, Tianle / Zheng, Shaojun / Jiang, Guosheng / Yang, Guokun / Qin, Shunbo / Wang, Zihang / Lai, Hourun	Preparation and investigation of heat insulation materials with microorganism-assisted foaming	137288
Li, Xiangguo / He, Chenhao / Lv, Yang / Jiang, Dongbing / Dan, Jianming / Chen, Yang / Li, Shuguo / Ma, Weinan	Preparation and properties of porous rice husk ash for internal curing of high performance cement pastes	137152
Zhang, Hong-liang / Zuo, Xiao-Bao / Sun, Qi-Quan / Liu, Jia-Yuan / Zou, Yu-Xiao / Zhang, Tian-tian / Tian, Jia-Li	Preparation of h-BN@ZnO composite epoxy coating for improve durability and antibacterial properties of concrete	137082
Jin, Jiaxu / Chen, Yongyong / Li, Mingxu / Liu, Tao / Qin, Zhifa / Liu, Qiang / Liang, Bing / Zhao, Jitao / Zuo, Shenghao	Preparation of self-consolidating cemented backfill with tailings and alkali activated slurry: Performance evaluation and environmental impact	137088
Baykara, Haci / Riofrio, Ariel / Cornejo, Mauricio	Preparation, characterization, and environmental impact analysis of natural Ecuadorian zeolite tuff-based silicoaluminophosphate geopolymer	137126
Zhou, Zhan / Cao, Jinde / Shi, Xinli / Zhang, Weiguang / Huang, Wei	Probabilistic rutting model using NGBoost and SHAP: Incorporating other performance indicators	137052
Erkmen, Jülide / Hamamcı, Benek / Yakut, Rıdvan	Production of insulation material using styrene acrylic resin from animal and agricultural waste part 2: Mechanical properties, fire retardant, acoustic properties	137148
Merli, F. / Buratti, C.	Properties and energy performance of wood waste sustainable panels resulting from the fabrication of innovative monolithic aerogel glazing systems	137310
Feng, Shuyao / Zhang, Guofang / Ren, Yanli	Properties and microstructure of soil solidified by titanium slag-flue gas desulfurized gypsum-Portland cement composites as solidifiers	137061
Woskowski, Julia / Neumann, Andreas / Roggendorf, Hans / Wehrspohn, Ralf / Stöber, Stefan	Properties of low sulfur leached spodumene as supplementary cementitious material in ordinary Portland cement	137096
Gomes, Otávio J. F. / Lucas Júnior, Jorge L. O. / Bastos, Juceline B. S. / Soares, Jorge B.	Proposition of an aggregate-binder interface index based on the adhesiveness test assessed by digital image processing	137006
Yang, Yuzhu / Liu, Jianhui / Liu, Leping / Li, Jing / Liu, Qi / Chen, Zheng / Shi, Caijun	Quantifying the water saturation degree of cement-based materials by hydrogen nuclear magnetic resonance (1H NMR)	137340
Chen, E. / Li, Y. X. / Zhang, S. S.	Quantitative monitoring of localized pitting corrosion in steel bars through a combined use of distributed optical fiber sensors and finite element analyses	136970
Ying, Xuejin / Zhao, Xiao / Cui, Han / Zhao, Jianjun	Recycled glass concrete with cementitious materials: Study of mechanical prediction model and dry shrinkage mechanism	137159
Duan, Shaochan / Cui, Jingxian / Hu, Jianying / Han, Tao / Chen, Yan / Wang, Hongyu / Ma, Tao	Research on the adhesion mechanism and compatibility of acrylate composite polyurethane binder − aggregate based on surface free energy theory	137236
Singh Sidhu, Amandeep / Siddique, Rafat	Review on effect of curing methods on high strength concrete	136858
Liu, Xinghao / Chen, Zaixian / Yu, Zicong / Chen, Pang / Zhang, Yingzi	A review on ultra-high performance seawater sea sand concrete: Hydration, microstructure and properties	136945
Huang, Changxin / Zhang, Qingsong / Liu, Jun / Zhang, Lianzhen / Wang, Xiaochen / Pei, Yan	Rheological properties of quick-setting slurry considering heat exchange in high temperature fractured rock mass and its application	137221
Masoud, Laith / Hammoud, Ahmad / Mortada, Youssef / Masad, Eyad	Rheological, mechanical, and microscopic properties of polypropylene fiber reinforced-geopolymer concrete for additive manufacturing	137069
Vafaei, Babak / Ghahremaninezhad, Ali	Self-healing effect of hydrogels in cement slag and fly ash pastes	137036
Martins, Ricardo / do Carmo, Ricardo / Costa, Hugo / Júlio, Eduardo	Shear study on the interface between ultra-high durability concrete and low-cement-lightweight concrete for precast composite walls	137211
Yu, Jiao / Wang, Kerui / Yang, Peixuan / Li, Mengmeng / Dong, Biqin / Jin, Zuquan / Hong, Shuxian / Ma, Hongyan	Simulation of calcium carbonate nucleation processes in confined C-S-H nanopores with different calcium-silicon ratios	137157
Sun, Huajun / Yang, Kangbo / Xiang, Nan / Tang, Guifeng / Zhang, Na / Wang, Chuanxing	Six-membered ring-reinforced flexible high-elongation block polyamide as strong and multi-reusable hot melt adhesive	137132
Martwong, Ekkachai / Yingshataporn-a-nan, Thanathach / Minanandana, Tanapat / Puksuwan, Kitchapat / Junthip, Jatupol / Sukhawipat, Nathapong	Sound absorption and thermal insulation materials from waste palm oil for housing application: Green polyurethane/water hyacinth fiber sheet composite	137007
Zhu, Yu / Zhang, Weiguang / Chen, Feng / Ma, Tao / Ma, Yuan / Fang, Zhou	A state-of-the-art review of intelligent compaction measurement values (ICMVs) for subgrade and pavement: Advances and challenges	137174
Chu, S. H.	Strain-hardening ultra-high performance concrete (UHPC) with hybrid steel and ultra-high molecular weight polyethylene fibers	136716
Kampala, Apichit / Suebsuk, Jirayut / Daprom, Pattawitchaya / Arngbunta, Anukun / Chindaprasirt, Prinya	Strength characteristics and mix design of full-depth reclamation of asphalt pavement with cement	136901
Han, Kaidong / Guo, Tengfei / Shu, Xin / Shi, Jinyan / Ran, Qianping	Structural build-up of cement pastes - Underlying mechanisms considering the particle packing, colloidal interactions and hydration kinetics	137030
Yang, Yuanyi / Shi, Xianyun / Zhou, Qi / Deng, Gan / Li, Wenbin / Li, Caiying / Yang, Tingting / Yin, Liangjun	Structural design and electromagnetic wave absorbing performance optimization of lightweight foam cement-based metamaterials	137191
Momotaz, Hasan / Rahman, Md Mizanur / Karim, Md Rajibul / Zhuge, Yan / Ma, Xing / Levett, Peter	Structural performance of fibre reinforced recycled aggregate concrete road kerb sections under monotonic and cyclic loading	137329
Hou, Chen / Wang, Qing / Zheng, Xu / Zhang, Rui / Wang, Ning	Study of corrosion resistance of superhydrophobic hydrotalcite cement mortar in chlorine salt environment	137124
Zhang, Xijun / Du, Mingrui / Fang, Hongyuan / Yao, Xupei / Li, Bin / Zhai, Kejie / Du, Xueming / Shi, Mingsheng	Study on bearing capacity of corroded pipes before and after spraying rehabilitation	137020
Yao, Nan / Huang, Tianyu / Zhang, Guangquan / Lv, Lei / Lin, Kunfeng / Liu, Yiding / Ruan, Xi	Study on delamination characteristics and mechanical properties of cemented waste rock backfill with rubber aggregation	137090
Li, Xiaofan / Zhou, Zhi / Wang, Bo / Huang, Wei	Study on impermeability of reinforced concrete wall with horizontal construction joints	137220
Yu, Tianyou / Jiang, Guanlu / Rao, Qianzhu / Wu, Lin / Zhu, Dan	Study on macro-microscopic degradation properties of red mudstone under the influence of water vapor cycling	136981
Wang, Qiang / Zhang, Rongbing / Guo, Jiawei / Cai, Guojun / Li, Yafeng	Study on mechanical properties and microstructure of metakaolin-slag-calcium carbide residue synergistic solidifying waste engineering mud	137135
Hu, Junjie / Niu, Renjie / Zhang, Weizhuo / Xie, Guangming / Liu, Jun / Xing, Feng	Study on preparing sustainable limestone calcined clay cement (LC3) through CO2-active treatment of municipal solid waste incineration fly ash (IFA)	137040
Zhang, Wenyang / Xu, Haoqing / Wang, Wei / Zhang, Nan / Jiang, Pengming / Yue, Yong / Ge, Peng	Study on recycling and utilization of phosphogypsum and lithium slag in vertical barrier materials	137301
Chen, Jialin / Chen, Bo / Qiang, Sheng / Chen, Shoukai	Study on strength deterioration mechanism of foamed concrete under freeze-thaw cycles: Experiment and numerical simulation	137083
Jiang, Wei / Li, Jingxiao / Hou, Yukai / Yuan, Dongdong / Ling, Xianwu / Ren, Xueyuan	Study on the influence of void evolution of porous asphalt concrete on acoustic absorption performance under high-temperature loading	136992
Cai, Qiang / Yuan, Qiang / Long, Jiangfeng / Sun, Zixuan / Wu, Kai / Xu, Linglin	Study on the properties improvement of wet quarry sludge made artificial aggregates by using PAM and CaO	137123
Elert, Kerstin / Bicer-Simsir, Beril / Correa, Elena / Rodriguez-Navarro, Carlos / Gulotta, Davide	Surface characterization of consolidated earthen substrates using an innovative multi-analytical strategy	137154
Benli, Ahmet	Sustainable use of waste glass sand and waste glass powder in alkali-activated slag foam concretes: Physico-mechanical, thermal insulation and durability characteristics	137128
Beniddar, Hamza / El Machi, Aiman / El Abbassi, Fatima-Ezzahra / Taha, Yassine / Benzaazoua, Mostafa / Hakkou, Rachid	Sustainable utilization of phosphate mine waste rocks as sand substitutes in cement mortar production	136949
Machello, Chiara / Bazli, Milad / Santos, Josiah / Rajabipour, Ali / Arashpour, Mehrdad / Hassanli, Reza	Tensile strength retention of fibre-reinforced polymer composites exposed to elevated temperatures: A meta-analysis review	137150
Zhang, Xiaozhu / Zhang, Zhi-yuan / Zhou, Junbo / Du, Ruize / Yin, Xianghui / Kang, Shaoguo / Zheng, Yang / Liu, Yisong	Thermal behavior and mechanism study of geopolymers prepared from ferronickel slag with high fire resistance	137282
Kong, Peipei / Chen, Xianhua / Zhuo, Shangzhi / Leng, Zhen / Xu, Gang / Shen, Kairen / Wang, Shiqi / Zhou, Yixin / Teng, Guocui / Yang, Jun	Thermo-oxidative aging performance of mechanochemical activated rubber powder modified asphalt	137053
Zhang, Xiangdong / Geng, Jie / Hu, Guohang / Su, Lijuan / Li, Tianyu / Wang, Ye / Zheng, Chunyu / Li, Wenliang / Zhang, Xuefeng	Toughening characteristics of rubber granule-improved alkali-activated slag-stabilized aeolian sand	137059
Hasani, Alireza / Dorafshan, Sattar	Transforming construction? Evaluation of the state of structural 3D concrete printing in research and practice	137027
Anunike, Great S. / Tarabin, Mohamad / Hisseine, Ousmane A.	Ultra-high-performance concrete for nuclear applications: A review of raw materials and mix design approaches	136938
Tang, Ning / Guo, Shenghao / Yang, Ye / Sun, Wei	Ultrasonic waves generated by smart aggregates for concealed crack detection in asphalt mixture	137183
Xiong, Guangqi / Ren, Yuanliang / Fang, Zheng / Jia, Xiaolong / Sun, Keke / Guo, Bumin / Huang, Qian / Wang, Chong / Zhou, Shuai	Understanding the cavitation effect of power ultrasound in cement paste	137089
Ding, Mengzhao / Chen, Xueying / Li, Yunpeng / Song, Letong / Shi, Yanjie / Luo, Lida / Wang, Qingwei	Vacuum sintering of the self-developed Chang’E-5 lunar regolith simulant	137343
Lu, Xiaosong / Shang, Qiaoyan / He, Rui / Yao, Wenhao / Guo, Haoqin	Visible characteristics and durability assessment of methyl methacrylate-based luminescent road marking using unencapsulated SrAl2O4: Eu2+, Dy3+ under coupling service conditions	137071

Über diese
Datenseite
IssueID
74269
Veröffentlicht am:
20.06.2024
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.