Paivo Kinnunen 
- (2024): Utilization of calcite-rich Green Liquor Dregs (GLD) by-products from pulp and paper industry: Cement clinker production and life cycle analysis. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2023): MgO-based cements – Current status and opportunities. Dans: RILEM Technical Letters, v. 8 (août 2023).
- (2023): Alternative alkali activator from pulp mill waste – One-part blast furnace slag mortar activated with recovery boiler fly ash. Dans: Journal of Building Engineering, v. 76 (octobre 2023).
- (2023): Utilization of green liquor dreg in lightweight aggregates: Effect of texture on physical properties. Dans: Developments in the Built Environment, v. 15 (octobre 2023).
- (2019): Ettringite-based binder from ladle slag and gypsum – The effect of citric acid on fresh and hardened state properties. Dans: Cement and Concrete Research, v. 123 (septembre 2019).
- (2018): One-part alkali-activated materials: A review. Dans: Cement and Concrete Research, v. 103 (janvier 2018).
- (2023): Effect of green liquor dregs as an alkali source for alkali-activated blast furnace slag mortar. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2023): Hydration of blended ladle slag and calcium aluminate cement. Dans: Journal of Building Engineering, v. 66 (mai 2023).
- (2022): Incorporation of bioleached sulfidic mine tailings in one-part alkali-activated blast furnace slag mortar. Dans: Construction and Building Materials, v. 333 (mai 2022).
- (2022): High strength fiber reinforced one-part alkali activated slag composites from industrial side streams. Dans: Construction and Building Materials, v. 319 (février 2022).
- (2022): New synthetic glass-based supplementary cementitious materials derived from basalt composition. Dans: Journal of Building Engineering, v. 46 (avril 2022).
- (2021): High strength one-part alkali-activated slag blends designed by particle packing optimization. Dans: Construction and Building Materials, v. 299 (septembre 2021).
- (2020): Utilisation of glass wool waste and mine tailings in high performance building ceramics. Dans: Journal of Building Engineering, v. 31 (septembre 2020).
- (2020): Peat-Wood Fly Ash as Cold-Region Supplementary Cementitious Material: Air Content and Freeze–Thaw Resistance of Air-Entrained Mortars. Dans: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (juin 2020).
- (2020): Improvement of mechanical strength of alkali-activated materials using micro low-alumina mine tailings. Dans: Construction and Building Materials, v. 248 (juillet 2020).
- (2018): Milling of peat-wood fly ash: Effect on water demand of mortar and rheology of cement paste. Dans: Construction and Building Materials, v. 180 (août 2018).
- (2020): Influence of sodium silicate powder silica modulus for mechanical and chemical properties of dry-mix alkali-activated slag mortar. Dans: Construction and Building Materials, v. 233 (février 2020).
- (2019): The effect of peat and wood fly ash on the porosity of mortar. Dans: Construction and Building Materials, v. 223 (octobre 2019).
- (2019): Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties. Dans: Construction and Building Materials, v. 221 (octobre 2019).
- (2019): Byproduct-based ettringite binder – A synergy between ladle slag and gypsum. Dans: Construction and Building Materials, v. 197 (février 2019).
- (2017): Properties and durability of alkali-activated ladle slag. Dans: Materials and Structures, v. 50, n. 6 (décembre 2017).
- (2018): Ladle slag cement – Characterization of hydration and conversion. Dans: Construction and Building Materials, v. 193 (décembre 2018).
- (2017): Partial Replacement of Portland-Composite Cement by Fluidized Bed Combustion Fly Ash. Dans: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 8 (août 2017).
Structurae coopère avec
