0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Preparation and Performance Assessment of Asphalt Emulsion Modified by the Fabricated SBS Latex

Auteur(s):






Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-11
DOI: 10.1155/2020/6699416
Abstrait:

Polymer modified asphalt emulsion (PMAE) has recently been proven to be one of the most effective methods to overcome the common distress of asphalt surface treatments, such as abrasion, rutting, ravelling, and poor durability. Because of the limited research studies about the preparation of PMAE using SBS latex, a new method to prepare SBS latex was developed and the feasibility of using it in preparing SBS latex modified asphalt emulsion (SBS-LMAE) was verified in this study. The optimized swelling parameters for linear SBS solutions were swelling 24 h at the temperature of 50°C with the toluene/SBS (T/S) mass ratios of 2.5 : 1 to 2.0 : 1 which was determined according to the analysis of viscosity and Tyndall effect. After that, the SBS latex with favorable dispersivity and stability was successfully fabricated with the T/S ratio of 2.0 : 1. At last, the well-specified SBS-LMAE was prepared using the fabricated latex and tested for its conventional performances and microstructure. The results show that the SBS-LMAE samples all meet the main requirements of PMAE for microsurfacing and possess appropriate uniformity and stability.

Copyright: © Rui He et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10525979
  • Publié(e) le:
    11.12.2020
  • Modifié(e) le:
    02.06.2021