0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

General Information

Status: in use

Project Type

Location

Location: , , ,
Coordinates: 42° 9' 49.65" N    8° 42' 31.79" W
Show coordinates on a map

Technical Information

Dimensions

main span 27 m
deck width 1.70 m
walkway width 1.50 m

Materials

deck steel
pylons steel
abutments reinforced concrete

Notes

The clear span is 27 metres long, with the shape of one inverted V in elevation. The ramps are of 26,50 metres long due to the gradient of the road ( 9 %). The deck is suspended from four sets of ties, arranged along the inner side. The deck is 1,70 m wide with a pedestrian zone of 1,50 m wide.

The deck is built in a metalic box, 200 mm wide and 300 mm deep. The cantilever of the deck has metalic beams of variable depth, separated 1 m, welded to a top metalic sheet linked, with metallic profiles, to a structural reinforced concrete of 50 mm. depth. The rough concrete surface was chosen deliberately to avoid frost, slides bacause of rain, and the tambour effect that could be the result of the pedestrian passage along a metallic skin.

The ties go from the inner edge of the deck, the metallic box, to two leaning pylons of 23,8 mm. in diameter, 20 mm. depth, and 16,5 m. height. There are 8 stays in the clear span and four stays in each one of the ramps. Each ramp has three pillars in the border with a zig zag shaped, aligned with the suspension point of the ties in the pylons.

Two stays go from the pylons to the junction of the ramps with the main span. There are also two counter-stays for each pylon anchored in a block of concrete.

Participants

Design
Architecture

Relevant Web Sites

There currently are no relevant websites listed.

Relevant Publications

  • About this
    data sheet
  • Structure-ID
    20012252
  • Published on:
    09/06/2004
  • Last updated on:
    26/06/2017
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine