0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Piscataqua River I-95 Bridge

General Information

Completion: 1er November 1972
Status: in use

Project Type

Awards and Distinctions

1973 Award of Merit  

Location

Location: , , ,
, , ,
Crosses:
  • Piscataqua River
Carries:
  • Interstate I-95
Part of:
Coordinates: 43° 5' 34.08" N    70° 45' 58.32" W
Show coordinates on a map

Technical Information

Dimensions

total length 1 372.5 m
roadway / carriageway width 29.9 m

Materials

arch steel

Excerpt from Wikipedia

The Piscataqua River Bridge is a through arch bridge that crosses the Piscataqua River, connecting Portsmouth, New Hampshire with Kittery, Maine. Carrying six lanes of Interstate 95, the bridge is the third modern span and first fixed crossing of the Piscataqua between Portsmouth and Kittery. The two other spans, the Memorial Bridge and the Sarah Mildred Long Bridge, are both lift bridges, built to accommodate ship traffic along the Piscataqua. The high arch design of the Piscataqua River Bridge eliminates the need for a movable roadway.

History

The development of the Interstate Highway System required new roadbeds to be constructed and existing ones to be absorbed into the network. In New Hampshire, Interstate 95 was routed along the New Hampshire Turnpike, which had opened to traffic in 1950, and paralleled U.S. Route 1 through New Hampshire's Seacoast region from the Massachusetts border to the Turnpike's end at the Portsmouth Traffic Circle. A gap remained between the traffic circle and the beginning of the Maine Turnpike on the other side of the Piscataqua River, filled by the US-1 Bypass. It crossed the river using the two-lane Sarah Mildred Long lift bridge, which was far from meeting Interstate Highway standards for four-lane highways and fixed spans.

The decision was made to extend I-95 north from the New Hampshire Turnpike at Portsmouth and south from the Maine Turnpike in Kittery, and join the roads with a high-speed fixed span over the Piscataqua. Work on the bridge began in 1968 and was completed in 1971, with the I-95 extension to it in Maine completed the following year.

Tragedy struck the site about midway through construction. On June 24, 1970, two of the I-beams supporting the staging area on the Kittery side of the span gave way, plunging four workers 75 feet to their deaths and leaving another seven injured. A memorial plaque was placed beneath the bridge on the Maine side, visible from Maine Route 103.

The bridge was officially opened on November 1, 1972, in a ceremony attended by the Governor of New Hampshire, Walter R. Peterson Jr., and the Governor of Maine, Kenneth M. Curtis.

Text imported from Wikipedia article "Piscataqua River Bridge" and modified on July 23, 2019 according to the CC-BY-SA 4.0 International license.

Participants

Relevant Web Sites

  • About this
    data sheet
  • Structure-ID
    20007192
  • Published on:
    10/12/2002
  • Last updated on:
    24/10/2023
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine